question

dbx120 avatar image
dbx120 asked

VE.Direct / RS232 Load Profile Settings

Using the VictronConnect app on a PC, the load profile settings of a 75/15 can be changed over VE.Direct, yet the VE.Direct whitepaper makes no mention of how to read and write these values.

I have tried sniffing the serial port while making these changes using VictronCOnnect, but I haven't got any further.

Has anybody else tried this?

VE.Directcommunication protocol
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi,

You can find the necessary information in the document "VE.Direct HEX Protocol MPPT" that can be downloaded from the following webpage: https://www.victronenergy.com/support-and-downloads/technical-information

Kind regards,

Thiemo van Engelen

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dbx120 avatar image
dbx120 answered ·

Thanks Thiemo!


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

VE.Direct protocol FAQ

Additional resources still need to be added for this topic