Hello,
i have a little program, based on this framehandler
https://www.victronenergy.com/live/vedirect_protocol:faq
so mit most devices it works perfect.
but with a 150/70 it doenst work, the problem is that the device append a HEX message direct after the Checksum byte without linebreak or something.
the message from the device is:
- PID 0xA071
- FWE 315FF
- SER# HQ2324YAH29
- V 22000
- I 0
- VPV 0
- PPV 0
- MPPT 0
- CS 0
- OR 0x00000001
- ERR 0
- LOAD OFF
- H19 1077
- H20 0
- H21 4
- H22 117
- H23 921
- HSDS 16
- Checksum ▒:A2001002200000008
- :ADBED00750806
- :AD5ED009708EA
- :A8DED00970832
so i tried all linked arduino librarys and other examples linked in this froum and support pages, but no on can handle this message.
anyone a idea, or can update the framehandler example?
thank you