Change settings MultiPlus-II GX and MultiPlus-II
I have a few questions that I can't seem to find an answer to anywhere. That's why I hope this group could help me.
We are looking for a Victron setup. At home we have a 3 phase suply. That is why we have chosen for ourselves 1x a Multiplus-II-GX(L1-N) and 2x Multiplus-II (L2-N and L3-N).
We would like to be able to configure these devices. Everywhere in the manuals they talk about an accessory (Interface MK3-USB) for configuring the devices. But I was wondering since we have a Multiplus-II-GX we can set it through the internet port. And if this Multiplus-II-GX is connected via the VE.bus ports to the other 2 Multiplus-II could these devices be set up like this trough the GX? Or is It realy nasecary to configure these units to heave a MK3-USB converter. We would also like to keep our system in check via the (VRM system). For that you would need a Cerbo GX. If I understand correctly, this device would ensure that all data about my Multiplus-II is available via the VRM. But since I will have a Multiplus-II-GX is it still necessary to add such a Cerbo GX? Or can the Multiplus-II-GX version also talk to the VRM-online system?
Hopefully my question is loud and clear. Hopefully someone knows if this would be possible.
Thx!
