Hi, when connecting to the grid I can see from Victron Connect that the AC1 in relay/gate is open and will not allow grid power in. Is there a setting in Victron connect to cure this?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, when connecting to the grid I can see from Victron Connect that the AC1 in relay/gate is open and will not allow grid power in. Is there a setting in Victron connect to cure this?
Dp you have a gx device connected? Under devices and multi you can see what is happening there.
But yes uncheck UPSfunction and you should be all set.
Additional resources still need to be added for this topic
40 People are following this question.