Hello, I bought a supported external Victron Wi-Fi USB dongle to increase wireless range. To install it I just plug it in? Or there is some software setup at the Remote Console? Thanks in advance.

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

espoerer asked Oct 7, '21

cerbo gx

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra answered · Oct 07, 2021 at 08:36 PM

If it is supported then you just plug it in. No driver or software to install they are built into the GX OS.

Then you just need to enter your wifi password.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-10-07T23:52:30Z

tmartin000 answered · Oct 07, 2021 at 11:52 PM

Yup, just plug in..

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-10-08T06:54:51Z

seb71 answered · Oct 08, 2021 at 06:54 AM

Do not use the first USB port next to the HDMI port. That USB port is only for powering the optional Cerbo GX display.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

espoerer commented · Oct 08, 2021 at 10:48 AM

Thank you very much!

0 ·