question

Oliver avatar image
Oliver asked

Charging power not balanced between 3-phase Multipluses

Hello,

Three Multiplus 5000 form a three phase system. When running the generator we observe that basically only L3 is doing the charging. But I expect to see the charging current somehow evenly distributed between the phases.

We are running CCGX 2.66 and VE.Bus 482.

DVCC is on with current limit of 200A.

The same config settings were sent to all Multipluses.

Any idea how to solve this? I appreciate any hint. Thank you

screenshot-20211007-1240152.png

Kind regards



battery chargingGeneratormultiplus ve.bus3 phase
screenshot-20211007-1240152.png (342.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
basil katakuzinos avatar image
basil katakuzinos answered ·

All i can think of is that the charging settings where only sent to the L3 inverter. Are you 100% sure the same settings where set to all?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

MultiPlus Generator FAQ

GX - Generator auto start/stop

Automatic Generator start/stop

 Hybrid Generators

Virtual switch - Generator start/stop