question

stemue avatar image
stemue asked

Issues with VRM Portal

Hi,

ive two issues wit the VRM Portal.

a) the detailed solar data in the dashboard live view is updating just in the cerbo update interval.

it was a realtime since 4-5 days ago looks like something was done after an update of the VRM portal ?


b) Ive a MP5000/48 it is connected via ESS to compensate all three phases. Pthe output power is added to AC Loads on L1 as load. So the the fully compensated power is added the the load of L1.

The power is not correctly shown and maybe also not correct in the statistics.

Is there a way to change that to get a correct AC Loads output ?

Is there away to let the VRM Portal know that its on L3 not on L1 ?

Is ther a way to Configure the Cerbo or the MP2 that it knows it is connected on L3 ?



KR

Stefan


cerbo gxVRM
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alex Imbrea (Victron Energy Staff) avatar image
Alex Imbrea (Victron Energy Staff) answered ·

Hi, thank you for reporting this. Point a) is fixed now so the details should also update in realtime.

8 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image nickdb ♦♦ commented ·
@Alex Imbrea (Victron Energy Staff) thanks, except now the historical data chart on the dashboard is broken.
0 Likes 0 ·
Alex Imbrea (Victron Energy Staff) avatar image Alex Imbrea (Victron Energy Staff) ♦♦ nickdb ♦♦ commented ·
@stemue could you please provide a screenshot or a description of the way is broken for your installation?
0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic