question

aslanhobbes avatar image
aslanhobbes asked

Does VRM require a Victron Inverter to show AC loads?

I added RPi with VenusOS. So far it looks great but I don't know how how to get make use of these two boxes (AC input, AC output) given my inverter is Magnum not Victron. Is there a way to either 1) remove these boxes from the dashboard or 2) measure usage on Magnum inverter using a hall sensor?

I have SmartSolar MPPT , Orion-Tr Smart DC to DC and SmartShunt. So far I have only connected Smartshunt. I will connect the Solar this weekend once I make the cable.

Thanks in advance. I think it is just cool that Victron made VenusOS available to everyone.

1632286911442.png

VRM
1632286911442.png (38.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@aslanhobbes

No not necessarily. You can add a meter to the system andsee the information through the GX

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

aslanhobbes avatar image aslanhobbes commented ·
Thanks! I didn't know there was such a product like that.
0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic