question

henkkregting avatar image
henkkregting asked

Can i use DVCC if i have a NON Victron lifepo4 battery ?

Can i use DVCC if i have a NON Victron lifepo4 battery ?


cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mike Dorsett avatar image
Mike Dorsett answered ·

yes, this does work. Your BMS does need to talk to the Venus OS though. Also the battery parameters in the BMS need to be correctly set. Have a look at Louis van der Walt serial bms thread for more information.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

henkkregting avatar image henkkregting commented ·
Ok, thanks, Then i need a BMS with a output to transfer data to the cerbo.
0 Likes 0 ·
Show more comments
Alexandra avatar image
Alexandra answered ·

@Henkkregting

Be best to read the manual on DVCC. It sets out the requirements your system should have to ise the feature.

The answer is yes and no. It depends on your setup. If it is a can bus enabled battery (pylotec, some blue novas) then definitely yes.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.