Hello,
We have connected BYD batteries as explained at Victron BYD Example System Diagram.
We use the following setup:
- Pro 2.5-10.0 battery box with 2 Lithium Ion Battery Cells
- Color Control GX
- BlueSolar Charge Controller MPPT 150 | 35
- Quattro 48/5000/70
When we restart the batteries, they run some errors:
- Run BMU led blinking once every time.
- Battery module SOC led scrolling side to side.
Battery voltage is 52.9 V while on (we have measured at both MPPT and Inverter terminals), but after 5 minutes they turn off and voltage drops to zero. Consequently, the inverter also turns off.
We have replaced all communication cables by new ones. Also, we checked both bateries are in different ADDR but the problem persists.
How could we solve this problem?
Thanks in advance.