This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I assume that the Solar numbers are the output from the panel & the Battery numbers are the output from the 75/15 MMPT controller.
why is the current / amps higher than panel output?
My BMV 700 shows the actual amp input somewhere in the middle of these 2 numbers.
Power into the mppt pretty much equals power out, minus some small losses.
Power = Volts x Amps.
22.51v x 4.7a (105w) into the mppt would equal about 14.58v x 7.1a (103.5w) out to the battery.
The Battery numbers are what is actually going to the battery?
