What is the response time of the Q48/15000 when ESS mode3 operation is passthru, i.e. how much time passes before it starts to charge from the moment it has received the charge command?
Thank you in advance,
Viktoria
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
What is the response time of the Q48/15000 when ESS mode3 operation is passthru, i.e. how much time passes before it starts to charge from the moment it has received the charge command?
Thank you in advance,
Viktoria
I think it responds right away, but there is a "ramp up" time for the charger to go from 0 to whatever the maximum is / possible.
In this video you can see how long it takes for Alexa to send the command and the system responds.
https://www.youtube.com/watch?v=2LVeW4B2pOc
Hi WKirby. Thank you for the link. In that case the command travels around the internet.
I mean in miliseconds from the arrival of the command in the Quattro to the moment it starts up to charge and possibly a ramp up time to full charge capacity.
ESS design and installation manual
Additional resources still need to be added for this topic
5 People are following this question.
Prioritizing PV for charging routine.
ESS How to adjust Multiplus that it is only charging from grid when there ain't solar power?
Question regarding SOC limits - Why is the active SOC stuck at 70% ?
BMW i3 Charging on an Victron Quattro + ESS LifePo4 system
How to force charging batteries at night from grid on an EasySolar with an ESS configuration ?