question

n-dee avatar image
n-dee asked

vrm current "flow"

Lately, currentflow in VRM was adapted so that my fronius on ac-out is shown the right way.

But the dots are moving not correctly.

See the picture -> Fronius produces 2717w and house takes 481w.
So the dots should move from Fronius to our House (AC-Lasten) and to Victron. (green arrows)
But wrongly the dots are moving from Fronius to AC-Lasten and from Victron to AC-Lasten aswell. (red arrow) This is wrong as Fronius is feeding into grid, as victron does, too

1631112520564.png


VRM
1631112520564.png (121.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
n-dee avatar image
n-dee answered ·

I'l add an animated gif

flow.gif


flow.gif (450.3 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ronski avatar image ronski commented ·

I noticed this too, minor thing which I guess they didn't fix.


0 Likes 0 ·
Dave Rae avatar image
Dave Rae answered ·

I reported this some time back as well.Not a priority i guess.

Also the DC biased over AC coupled bug with the fully off grid setups still exists.


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

carsten2 avatar image carsten2 commented ·
What its the DC biased over AC bug?
0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic