Hi
I have installed 2x200Ah Victron Lithium Smart batteries via Lynx Smart BMS and Lynx Distributor to Multiplus-II 12/3000/120-32. I have tested the inverter function but not yet the charging due to below question(s). Additional info: There is no GX/Cerbo in my system and I intend to just use the Victron Connect IOS app.
Now to my question:
The manual for Multiplus-II states in chapter 2.3 a lot of specifics for lead acid/gel batteries and also in chapter 5 informs that the charging function is preconfigured for AGM/Gel batteries.
Chapter “2.3.2 Li-ion batteries” then only states: “Victron LiFePO4 Smart batteries: Use the VE.Bus BMS”…
—> can you please explain
a) if the Lynx Smart BMS (is this a VE.Bus BMS??) will control the charging coming via “Multiplus on shore power” automatically and correctly for the Lithium Smart batteries and there is NO need for a change of the Multiplus’ charger configuration
or
b) if the configuration of the Multiplus needs to be changed (using PC and MK3-USB connector)?
In addition, I hope/expect the Lynx Smart BMS, as it receives the battery temperature info, will stop charging when batteries reach 5C!? please confirm this assumption as well if possible.
Thx for reply