question

David avatar image
David asked

Digital Input State no longer has data in VRM - Looks broken?

I have the 4 Digital IO ports in use on my Cerbo and I could see graphs on when a state was on/off or running/stopped on VRM, but today all I see is "no data available" including any previous dates where I had seen graphing.

The Digital IO ports are still working and I can see in the Remote Console the state and changes, and also in VRM I see data in the "Digital Input Summary" which reflects the state of the IO correctly.

1630949415847.png


VRM
1630949415847.png (22.3 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tedownes avatar image tedownes commented ·
I have the same issue and can't find a solution. I noticed in my VRM the date type (the two states on the graph) have changed from on/off to high/low and thats why the data is not displayed. Yours have also changed to high/low from started/stopped and open/closed. I haven't found an option to change these data types so i guess this is a bug.
0 Likes 0 ·
Show more comments
1 Answer
pwfarnell avatar image
pwfarnell answered ·

A couple of other posts on this, Victron have yet to pick it up.

mine from 2 weeks ago https://community.victronenergy.com/questions/107428/vrm-indication-of-bilge-alarms-has-it-been-changed.html

and a more recent one https://community.victronenergy.com/questions/107581/vrm-portal-bug-digital-input.html?childToView=108979#answer-108979

Any ideas about this recently introduced bug @mvader (Victron Energy)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.