question

danielct avatar image
danielct asked

MPPT 150/100 CHARGING ISSUE

HI. I am using an SmartSolar MPPT 150/100 which at the end of absorption stage instead of switching to float stops charging the batteries so all my consumption switches on the batteries with full sun up. Settings made by my local dealer...same issue. Any ideas on that?

MPPT SmartSolar
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·
Some details would be useful.

Battery type.

Charger settings screenshot.

Charger history screenshot..

0 Likes 0 ·
1 Answer
danielct avatar image
danielct answered ·

ultracell UCG 200-12 AGM

Charging will resume and continue with float only if I start a big load......and after stoping it....if I start it again charging will again stop.



screenshot-2021-09-04-22-55-30-310-comvictronenerg.jpg


screenshot-2021-09-04-22-50-46-928-comandroidchrom.jpgImage Caption


img-20210831-125616.jpg screenshot-2021-09-04-22-55-30-310-comvictronenerg.jpg


screenshot-2021-09-04-22-55-30-310-comvictronenerg.jpg (163.6 KiB)
img-20210831-125616.jpg (146.0 KiB)
screenshot-2021-09-04-22-50-46-928-comandroidchrom.jpg (163.1 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

A couple of things to comment.

Your data is from 2 different days??

Your battery settings could be tweaked, re bulk/absorp voltage and temperature compensation.

Seeing as your on the VRM some data like this would be useful..

mppt-rebulk.png


0 Likes 0 ·
mppt-rebulk.png (457.1 KiB)