How much current AC Out-2 on EasySolar II GX 3000/48 supports ?
i cant find this in the manual which only states that the Out-1 can supply up to 45A.
Can anyone help please ?
asked
How much current AC Out-2 EasySolar II GX 3000/48 supports ?
as the AC-Out-2 is in series to the AC-Out-1 and just appended with a switch/relais, the total of 45A will apply for the BOTH of the two outputs together, no matter where you draw the power.
thank you @Av1um for your explanation,
so i can use the same size circuit breakers on both ? my current design has 60A circuit break for the AC out-1, so i just have to add another 60A breaker to AC out-2 ?
Here's how my diagram looks like now:
well, yes. but I guess you know, that a 60A breaker will actually never trip - because the load wont ever rise that high (as it simply cannot) and so 'save' your used wires & loads.
nevertheless, it's good to have those breakers, no question. how about some breaker near the 45A ?
(45A actually already require 16mm² - is it even possible to connect such a cable to those outputs?)
thanks @Av1um,
you are right, am new to this and still get confused over some details.
here's how i modified the design, let me know what you think please
Do you want to use ESS?
If yes it will probably not work with that ATS at the input, because in most cases the grid code you have to select will not accept the generator.
hi @Matthias Lange - DE,
the way i want the system to work is to use the grid when available first,
and use the generator when the grid is not available.
I don't want the system to feed power back into the grid at all,
is the design correct in that sense ?
Without ESS the system will not use PV energy to supply the loads or change the battery.
As soon as the grid is connected the Multi will passthrough the grid to the loads and starts charging the battery from the grid.
this is even if i dont want to feed power back to the grid?
am confused,
can i use ESS but without feeding power back to the grid ? and in that case do i still have to remove the ATS at the input ?
