I have a MPPT 100/30 showing 65.11v solar, and13.26v battery. No current at either and no watts. Have disconnected all wires for 3 mins and reconnected but still nothing. Anything else I should try?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

mick-fitzpatrick asked Mar 3, '19

MPPT Controllers

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-03-03T04:13:31Z

Guy Stewart (Victron Community Manager) answered · Mar 03, 2019 at 04:13 AM

Check to make sure all fuses and other circuits are intact.

Update firmware to the latest version.

If that is all done, and the problem persists, return the MPPT to your place of purchase for RMA and warranty replacement.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-03-03T10:37:04Z

mick-fitzpatrick answered · Mar 03, 2019 at 10:37 AM

I’m presently in Thailand and heading to Malaysia, I bought the controller in Australia, can I take it to an agent in Malaysia.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) ♦♦ commented · Mar 03, 2019 at 11:16 AM

Yes, any Victron distributor can help you with this.

A proof of purchase would also help a lot, but is not essential as can be worked from the serial number.

Let me know if you have any issues and I might be able to help.

0 ·