Idea

pepe1395 avatar image
pepe1395 suggested

Cerbo GX and BT advertising protocol data

When in local mode, with the VictronConnect App, I have a complete view in the home page of all the Victron devices on my boat, thanks to the advertising protocol. In VRM mode, I can only see those connected in VE.Direct to my Cerbo GX.

I’d like very much to view the informations received from the advertising protocol also in VRM mode. I still won't be able to change the configuration of objects not connected in VE.Direct, but it would be an important advantage to know their status.

What I see in VRM mode:

victronconnect-vrm.jpg


What I see in local mode:

victronconnect-local1.jpg

victronconnect-local2.jpg

cerbo gxVictronConnectBluetooth
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tomsnrg avatar image
tomsnrg commented

Would be great to have.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

albachiara avatar image
albachiara commented

it would be nice and useful

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

zonnigbreda avatar image
zonnigbreda commented

Fully agree.

For me it is also disapointment that BT only devices cannot be shown even the basic data via the cerbo.

e.g. I have blue smart charger which I can see if I am directly there, but no way to see it in the cerbo.
This device also lacks the VE.direct output to connect it via cable.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.