replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

Idea

bitcrusher suggested Mar 5, '22

Inclinometer for cerbo

Is there an inclinometer available (for RV or boats) that can be used (and monitored) with the VenusOS?

Perhaps like simarine has:

https://simarine.net/de/inclinometer/

cerbo gx

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) commented Mar 5, '22

Ruuvi sensor can provide acceleration for all 3 axes. So you can use it for this purpose if you want.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bitcrusher commented · Mar 05, 2022 at 08:38 AM

Ah, ok

But there isn‘t a GUI to show it on the cerbo?

0 ·

Kevin Windrem bitcrusher commented · Mar 06, 2022 at 07:41 PM

The Ruuvi app on my phone only shows acceleration, no obsolete rotational position. So I'm not sure you'd get it to function as an inclinometer.

I 'm not sure how useful inclinometer readings on the GX device will be. For me, I want this information while setting up the RV before I even open it's door. True, if you have access to the GX GUI from a phone or tablet, that might work.

For me, I'm happy with LevelMatePro and it's own app. I can level the trailer side to side from inside the tow vehicle.

0 ·

Gregory Cavanagh commented May 14, '24

+1
Would like this feature on Victron as its one if not the only thing missing that the simarine has.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ak68 commented Jun 21, '24

There is a nice Inclinometer from WitMotion:
WT901BLECL mit einem MPU9250 und BT 5.0 LE

It would be great, if VICTRON could implement it like Mopeka or Ruuvi :)

I olso tried to connect by RS485- without success until now dirctly by Serial:
https://forum.iobroker.net/topic/75410/abfrage-witmotion-wt901c-485-per-node-red
but: there is a plugin for signalk: signalk-hwt901b-imu-plus (I´m in testing ...)

The last possibility, if all other doesn´t work (with 2 inputs of Tank 140):
https://witmotion-sensor.com/products/sinit-ttl-current-analog-tilt-switch-high-stability-dual-axis-analog-4-20ma-90-degrees-security-inclinometer-anti-vibration-tilt-angle-sensor-ip67-waterproof-for-constructions-monitoring