Idea

Paul B avatar image
Paul B suggested

VRM Data enhancement request High and low cell number be added to the Graphs data box

It would be very handy to know the cell number that was the highest and lowest and reflected the graph reading the cell number could be added after the battery voltage reading

This would then give us the information as to which cell to check if required.

at the moment we know that a low or high cell voltage has been achieved but have no idea as to which cell this voltage is attributed to.

BMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

No Comments

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.