Venus v2.80 will (from v2.80~3 to be exact) switch to python3 and will then no longer provide python2. So for people running their own python code, either disable automatic updates or make the code work with python3.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Venus v2.80 will (from v2.80~3 to be exact) switch to python3 and will then no longer provide python2. So for people running their own python code, either disable automatic updates or make the code work with python3.
Thanks Jeroen, this will be good as there are major changes between Python2.7 and 3.8 - Having to re-code python for 2.7 from 3 was a pain...
That is not what this message is about, you could install python3 already, iow opkg install python3-core python3-... This is a warning that python2 will be gone completely and python3 will be installed by default instead.
HowTo: Disable Hotkeys in Venus Remote Console on LAN
HowTo: Access Files on VenusOS with Root Access using Total Commander
HowTo: Change Tile Names in Venus OS Tile Overview
HowTo: Use a HDMI Screen with USB Touch Panel and USB HID Buttons on a Raspberry Pi running Venus
Add shortcut hotkey to start generator on Any screen
Venus HTML5 @SignalK (WilhelmSK)
How to: Quickly update RPI Touch Screen configuration on new SD card or after version update.