:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.110-rpi-venus-3 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:39:51 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s51980 r8192 d21748 u81920 [ 0.000000] pcpu-alloc: s51980 r8192 d21748 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:51:97:6A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000025b35000-0x0000000029b35000] (64MB) [ 0.000000] Memory: 3861716K/4050944K available (12288K kernel code, 1386K rwdata, 3348K rodata, 2048K init, 888K bss, 123692K reserved, 65536K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36054 entries in 106 pages [ 0.000000] ftrace: allocated 106 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3cc/0x5a4 with crng_init=1 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000034] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000097] bcm2835: system timer (irq = 25) [ 0.000762] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000783] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000807] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000825] Switching to timer-based delay loop, resolution 18ns [ 0.001093] Console: colour dummy device 80x30 [ 0.001158] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001196] pid_max: default: 32768 minimum: 301 [ 0.001362] LSM: Security Framework initializing [ 0.001547] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001578] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002972] cgroup: Disabling memory control group subsystem [ 0.003207] CPU: Testing write buffer coherency: ok [ 0.003269] CPU0: Spectre BHB: using loop workaround [ 0.003683] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004887] Setting up static identity map for 0x200000 - 0x20003c [ 0.005092] rcu: Hierarchical SRCU implementation. [ 0.006204] smp: Bringing up secondary CPUs ... [ 0.007374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007384] CPU1: Spectre BHB: using loop workaround [ 0.008734] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008745] CPU2: Spectre BHB: using loop workaround [ 0.010048] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010058] CPU3: Spectre BHB: using loop workaround [ 0.010253] smp: Brought up 1 node, 4 CPUs [ 0.010278] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010299] CPU: All CPU(s) started in HYP mode. [ 0.010318] CPU: Virtualization extensions available. [ 0.011242] devtmpfs: initialized [ 0.025851] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.026080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026117] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.028082] pinctrl core: initialized pinctrl subsystem [ 0.029123] NET: Registered protocol family 16 [ 0.032917] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.033685] audit: initializing netlink subsys (disabled) [ 0.033959] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.034527] thermal_sys: Registered thermal governor 'step_wise' [ 0.034745] cpuidle: using governor menu [ 0.035294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.035317] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.035718] Serial: AMBA PL011 UART driver [ 0.067850] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.080851] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start [ 0.090866] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5 [ 0.133529] Kprobes globally optimized [ 0.136302] cryptd: max_cpu_qlen set to 1000 [ 0.139146] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.143958] vgaarb: loaded [ 0.144432] SCSI subsystem initialized [ 0.144660] usbcore: registered new interface driver usbfs [ 0.144729] usbcore: registered new interface driver hub [ 0.144807] usbcore: registered new device driver usb [ 0.145164] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.147033] clocksource: Switched to clocksource arch_sys_counter [ 1.118400] VFS: Disk quotas dquot_6.6.0 [ 1.118508] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.118674] FS-Cache: Loaded [ 1.118877] CacheFiles: Loaded [ 1.129149] NET: Registered protocol family 2 [ 1.129363] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.131300] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.131349] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.131417] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.131490] TCP: Hash tables configured (established 8192 bind 8192) [ 1.131643] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.131685] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.131923] NET: Registered protocol family 1 [ 1.132674] RPC: Registered named UNIX socket transport module. [ 1.132697] RPC: Registered udp transport module. [ 1.132717] RPC: Registered tcp transport module. [ 1.132737] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.132766] PCI: CLS 0 bytes, default 64 [ 1.137607] Initialise system trusted keyrings [ 1.137860] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.146313] zbud: loaded [ 1.148213] FS-Cache: Netfs 'nfs' registered for caching [ 1.148980] NFS: Registering the id_resolver key type [ 1.149028] Key type id_resolver registered [ 1.149050] Key type id_legacy registered [ 1.149205] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.149228] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.150360] Key type asymmetric registered [ 1.150383] Asymmetric key parser 'x509' registered [ 1.150582] bounce: pool size: 64 pages [ 1.150629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.150841] io scheduler mq-deadline registered [ 1.150864] io scheduler kyber registered [ 1.155220] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.155258] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.155357] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.155452] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.209143] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.209526] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.209553] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.209580] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.209674] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.209922] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.213534] PCI: bus0: Fast back to back transfers disabled [ 1.213882] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.214016] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.214456] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.218123] PCI: bus1: Fast back to back transfers disabled [ 1.218247] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.218278] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.218368] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.218399] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.218808] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.219039] pcieport 0000:00:00.0: PME: Signaling with IRQ 62 [ 1.220003] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. [ 1.220039] bcm2708_fb: probe of soc:fb failed with error -2 [ 1.225529] Serial: 8250/16550 driver, 1 ports [ 1.225565] Serial: 8250/16550 driver, ISA IRQ sharing enabled [ 1.226446] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 1.228918] iproc-rng200 fe104000.rng: hwrng registered [ 1.229234] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.230625] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.242642] brd: module loaded [ 1.254711] loop: module loaded [ 1.256496] Loading iSCSI transport class v2.0-870. [ 1.261407] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.357183] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.358363] usbcore: registered new interface driver r8152 [ 1.358437] usbcore: registered new interface driver lan78xx [ 1.358505] usbcore: registered new interface driver smsc95xx [ 1.360132] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.360297] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.360337] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.364030] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00001e0000000890 [ 1.365315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.365341] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.365364] usb usb1: Product: xHCI Host Controller [ 1.365386] usb usb1: Manufacturer: Linux 5.10.110-rpi-venus-3 xhci-hcd [ 1.365408] usb usb1: SerialNumber: 0000:01:00.0 [ 1.366151] hub 1-0:1.0: USB hub found [ 1.366255] hub 1-0:1.0: 1 port detected [ 1.366930] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.366964] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.366995] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.367597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.367622] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.367645] usb usb2: Product: xHCI Host Controller [ 1.367666] usb usb2: Manufacturer: Linux 5.10.110-rpi-venus-3 xhci-hcd [ 1.367688] usb usb2: SerialNumber: 0000:01:00.0 [ 1.368419] hub 2-0:1.0: USB hub found [ 1.368498] hub 2-0:1.0: 4 ports detected [ 1.370219] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.370538] dwc_otg: FIQ enabled [ 1.370553] dwc_otg: NAK holdoff enabled [ 1.370567] dwc_otg: FIQ split-transaction FSM enabled [ 1.370585] Module dwc_common_port init [ 1.371583] usbcore: registered new interface driver uas [ 1.371699] usbcore: registered new interface driver usb-storage [ 1.371906] mousedev: PS/2 mouse device common for all mice [ 1.373722] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.377084] sdhci: Secure Digital Host Controller Interface driver [ 1.377105] sdhci: Copyright(c) Pierre Ossman [ 1.377808] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.378400] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.382743] ledtrig-cpu: registered to indicate activity on CPUs [ 1.383096] hid: raw HID events driver (C) Jiri Kosina [ 1.383287] usbcore: registered new interface driver usbhid [ 1.383308] usbhid: USB HID core driver [ 1.388510] Initializing XFRM netlink socket [ 1.389155] NET: Registered protocol family 10 [ 1.390540] Segment Routing with IPv6 [ 1.390633] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.391413] NET: Registered protocol family 17 [ 1.391523] Key type dns_resolver registered [ 1.391899] Registering SWP/SWPB emulation handler [ 1.395186] registered taskstats version 1 [ 1.395219] Loading compiled-in X.509 certificates [ 1.396031] Key type ._fscrypt registered [ 1.396054] Key type .fscrypt registered [ 1.396075] Key type fscrypt-provisioning registered [ 1.407509] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.407816] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.407894] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.416201] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 1.417009] printk: console [ttyS0] disabled [ 1.417191] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [ 2.744753] printk: console [ttyS0] enabled [ 2.751661] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.760142] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.766304] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.802470] of_cfs_init [ 2.805073] of_cfs_init: OK [ 2.823677] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.831089] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.838359] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.843988] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 2.851963] Waiting for root device /dev/mmcblk0p2... [ 2.854456] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.864396] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.898275] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.969426] mmc1: new high speed SDIO card at address 0001 [ 2.987342] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.994822] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 3.005352] mmcblk0: p1 p2 p3 [ 3.051661] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.059963] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.070490] devtmpfs: mounted [ 3.079777] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 3.088121] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.095374] usb 1-1: Product: USB2.0 Hub [ 3.102752] Freeing unused kernel memory: 2048K [ 3.107789] Run /sbin/init as init process [ 3.111954] with arguments: [ 3.111969] /sbin/init [ 3.111983] with environment: [ 3.111997] HOME=/ [ 3.112011] TERM=linux [ 3.113603] hub 1-1:1.0: USB hub found [ 3.117717] hub 1-1:1.0: 4 ports detected [ 3.631962] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.042451] udevd[165]: starting version 3.2.9 [ 4.078941] random: udevd: uninitialized urandom read (16 bytes read) [ 4.086208] random: udevd: uninitialized urandom read (16 bytes read) [ 4.092960] random: udevd: uninitialized urandom read (16 bytes read) [ 4.149457] udevd[166]: starting eudev-3.2.9 [ 4.321165] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 4.332608] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 4.344774] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 4.356286] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 4.388973] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.404224] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.410698] [vc_sm_connected_init]: start [ 4.416273] [vc_sm_connected_init]: installed successfully [ 4.424593] uart-pl011 fe201000.serial: no DMA platform data [ 4.444054] mc: Linux media interface: v0.10 [ 4.494621] videodev: Linux video capture interface: v2.00 [ 4.551138] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.552065] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.566137] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.613902] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.616446] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 4.643268] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.660729] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.673528] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 4.678864] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.688806] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 4.697198] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.706183] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 4.715983] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.725686] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.737162] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.747464] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.754493] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.756616] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 4.779448] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 4.786479] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 4.794992] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 4.819659] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 4.821309] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.835333] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 4.865527] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 4.894849] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.896832] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 4.912300] usbcore: registered new interface driver brcmfmac [ 4.965893] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 4.998774] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 5.018184] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 5.035430] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.053017] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.062319] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.081342] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.094271] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.192073] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.201042] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.222497] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 5.311128] Bluetooth: Core ver 2.22 [ 5.314863] NET: Registered protocol family 31 [ 5.319513] Bluetooth: HCI device and connection manager initialized [ 5.327842] Bluetooth: HCI socket layer initialized [ 5.332840] Bluetooth: L2CAP socket layer initialized [ 5.338129] Bluetooth: SCO socket layer initialized [ 5.354722] Bluetooth: HCI UART driver ver 2.3 [ 5.359332] Bluetooth: HCI UART protocol H4 registered [ 5.364650] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.371899] Bluetooth: HCI UART protocol Broadcom registered [ 5.555692] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.881695] urandom_read: 2 callbacks suppressed [ 6.881704] random: eeprom: uninitialized urandom read (24 bytes read) [ 7.453805] watchdog: watchdog0: watchdog did not stop! [ 8.031927] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 8.068297] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 8.075794] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 8.350394] NET: Registered protocol family 38 [ 9.324719] random: crng init done [ 9.328185] random: 1 urandom warning(s) missed due to ratelimiting [ 9.335396] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 9.346437] device eth0 entered promiscuous mode [ 9.352009] bcmgenet fd580000.ethernet eth0: Link is Down [ 9.580301] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.543869] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 33.117125] cam-dummy-reg: disabling [ 159.117353] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 159.125533] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 159.132753] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready [ 159.160826] 8021q: 802.1Q VLAN Support v1.8 [ 372.537095] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd [ 372.695708] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 372.704240] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 372.711699] usb 1-1.3: Product: MK2USB COM Interface [ 372.716748] usb 1-1.3: Manufacturer: VICTRONENERGY [ 372.721652] usb 1-1.3: SerialNumber: FTXPICH1 [ 372.770689] usbcore: registered new interface driver usbserial_generic [ 372.777459] usbserial: USB Serial support registered for generic [ 372.795108] usbcore: registered new interface driver ftdi_sio [ 372.801096] usbserial: USB Serial support registered for FTDI USB Serial Device [ 372.809496] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected [ 372.816606] usb 1-1.3: Detected FT232RL [ 372.823526] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0 [ 1366.291729] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 1366.300404] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 1366.383402] usb 1-1.3: USB disconnect, device number 3 [ 1366.393533] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 1366.402944] ftdi_sio 1-1.3:1.0: device disconnected [ 1375.287081] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd [ 1375.438645] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 1375.447172] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1375.454603] usb 1-1.3: Product: MK3-USB Interface [ 1375.459417] usb 1-1.3: Manufacturer: VictronEnergy [ 1375.464297] usb 1-1.3: SerialNumber: HQ2137QFPAC [ 1375.478589] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected [ 1375.485733] usb 1-1.3: Detected FT-X [ 1375.493667] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0 [40752.285192] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd [40764.575206] usb 1-1.2: new full-speed USB device number 6 using xhci_hcd [40764.725979] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [40764.734475] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [40764.741971] usb 1-1.2: Product: VE Direct cable [40764.746641] usb 1-1.2: Manufacturer: VictronEnergy BV [40764.751778] usb 1-1.2: SerialNumber: VE73VERT [40764.769681] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [40764.776836] usb 1-1.2: Detected FT-X [40764.784890] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1