=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.05.15 12:43:17 =~=~=~=~=~=~=~=~=~=~=~= root@nanopi:~# pwd /home/root root@nanopi:~# cd / root@nanopi:/# ls -la drwxr-xr-x 19 root root 1024 Apr 12 23:33 . drwxr-xr-x 19 root root 1024 Apr 12 23:33 .. drwxr-xr-x 2 root root 3072 Apr 12 23:32 bin drwxr-xr-x 2 root root 1024 Apr 12 23:28 boot drwxr-xr-x 12 root root 4096 Sep 6 2022 data drwxr-xr-x 14 root root 2760 May 15 10:33 dev drwxr-xr-x 46 root root 4096 Apr 12 23:32 etc drwxr-xr-x 3 root root 1024 Apr 12 23:29 home drwxr-xr-x 7 root root 4096 Apr 12 23:32 lib drwx------ 2 root root 12288 Apr 12 23:33 lost+found lrwxrwxrwx 1 root root 10 Apr 12 23:25 media -> /run/media drwxr-xr-x 2 root root 1024 Apr 12 23:25 mnt drwxr-xr-x 3 root root 1024 Apr 12 23:27 opt dr-xr-xr-x 300 root root 0 May 15 10:33 proc drwxr-xr-x 20 root root 960 May 15 10:43 run drwxr-xr-x 2 root root 4096 Apr 12 23:32 sbin drwxr-xr-x 28 root root 800 May 15 10:33 service dr-xr-xr-x 12 root root 0 May 15 10:33 sys lrwxrwxrwx 1 root root 8 Apr 12 23:29 tmp -> /var/tmp drwxr-xr-x 11 root root 1024 Apr 12 23:29 usr drwxr-xr-x 9 root root 1024 Apr 12 23:29 var root@nanopi:/# cd home root@nanopi:/home# ls -la drwxr-xr-x 3 root root 1024 Apr 12 23:29 . drwxr-xr-x 19 root root 1024 Apr 12 23:33 .. lrwxrwxrwx 1 root root 15 Apr 12 23:25 root -> /data/home/root drwxr-xr-x 2 xuser xuser 1024 Apr 12 23:29 xuser root@nanopi:/home# [ 613.090670] RTW: send eapol packet - WPA Group Key 1/2 [ 613.099216] RTW: recv eapol packet - WPA Group Key 2/2 [ 613.105971] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP cd /var root@nanopi:/var# ls backups lib lock run tmp www cache local log spool volatile root@nanopi:/var# cd log root@nanopi:/var/log# ls boot messages boot~ messages.0 can-bus-bms.can0 messages.1 dbus-adc messages.2 dbus-ble-sensors messages.3 dbus-cgwacs.ttyUSB0 messages.4 dbus-characterdisplay messages.5 dbus-digitalinputs mk2_dbus.ttyS3 dbus-fronius netmon dbus-fzsonick-48tl.ttyUSB0 serial-starter dbus-generator-starter service-advertiser dbus-imt-si-rs485tc.ttyUSB0 simple-upnpd dbus-modbus-client ssh-tunnel dbus-modbus-client.ttyUSB0 sshd dbus-modbustcp swupdate dbus-motordrive.can0 vecan-dbus.can0 dbus-qwacs vedirect.ttyS1 dbus-systemcalc-py vedirect.ttyS2 dbus-valence.can0 vedirect.ttyUSB0 dbus-vebus-to-pvinverter vedirect.ttyUSB1 dmesg vedirect.ttyUSB2 dmesg.old venus-access gps-dbus.ttyUSB0 venus-html5-logger gui venus-platform hiawatha vesmart-server hostapd vrmlogger hub4control websockify-c lastlog wtmp localsettings root@nanopi:/var/log# tail -f vecan-dbus.can0 tail: read error: Is a directory tail: read error: Is a directory tail: read error: Is a directory tail: read error: Is a directory ^C root@nanopi:/var/log# cd vecan-dbus.can0/ root@nanopi:/var/log/vecan-dbus.can0# ls @4000000064612113128ce0e4.u current @40000000646121cf182eecf4.u lock @40000000646130e62b280304.u state root@nanopi:/var/log/vecan-dbus.can0# ls -la drwx------ 2 root root 4096 May 14 19:05 . drwxr-xr-x 46 root root 4096 May 15 10:33 .. -rw-r--r-- 1 root root 292 May 14 17:57 @4000000064612113128ce0e4.u -rw-r--r-- 1 root root 146 May 14 18:00 @40000000646121cf182eecf4.u -rw-r--r-- 1 root root 146 May 14 19:04 @40000000646130e62b280304.u -rw-r--r-- 1 root root 1994 May 15 10:33 current -rw------- 1 root root 0 Sep 6 2022 lock -rw-r--r-- 1 root root 0 May 14 19:05 state root@nanopi:/var/log/vecan-dbus.can0# tail -f ccurrent @400000006461d46015be42e4 vecan-dbus 2.97 @400000006461e66e3b186cf4 *** CCGX booted (0) *** @400000006461e67415645b44 *** starting vecan-dbus *** @400000006461e67415649dac vecan-dbus 2.97 @400000006461f88238a9f94c *** CCGX booted (0) *** @400000006461f88825e7c9ec *** starting vecan-dbus *** @400000006461f88827abc10c vecan-dbus 2.97 @4000000064620a95387f43b4 *** CCGX booted (0) *** @4000000064620a9b13809f54 *** starting vecan-dbus *** @4000000064620a9b1561618c vecan-dbus 2.97 ^C root@nanopi:/var/log/vecan-dbus.can0# tail -f /var/log /messages May 15 10:35:32 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 10:35:32 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC May 15 10:38:25 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 10:38:25 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC May 15 10:43:54 nanopi user.warn kernel: [ 613.090670] RTW: send eapol packet - WPA Group Key 1/2 May 15 10:43:54 nanopi user.warn kernel: [ 613.099216] RTW: recv eapol packet - WPA Group Key 2/2 May 15 10:43:54 nanopi daemon.info hostapd: ap0: STA 00:1f:3b:70:36:19 WPA: group key handshake completed (RSN) May 15 10:43:54 nanopi user.warn kernel: [ 613.105971] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP May 15 10:46:19 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 10:46:19 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC [ 1213.099196] RTW: send eapol packet - WPA Group Key 1/2 [ 1213.107724] RTW: recv eapol packet - WPA Group Key 2/2 [ 1213.113773] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP May 15 10:53:54 nanopi user.warn kernel: [ 1213.099196] RTW: send eapol packet - WPA Group Key 1/2 May 15 10:53:54 nanopi user.warn kernel: [ 1213.107724] RTW: recv eapol packet - WPA Group Key 2/2 May 15 10:53:54 nanopi daemon.info hostapd: ap0: STA 00:1f:3b:70:36:19 WPA: group key handshake completed (RSN) May 15 10:53:54 nanopi user.warn kernel: [ 1213.113773] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP May 15 10:57:22 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 10:57:22 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC May 15 11:02:19 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 11:02:19 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC [ 1813.107994] RTW: send eapol packet - WPA Group Key 1/2 [ 1813.116539] RTW: recv eapol packet - WPA Group Key 2/2 [ 1813.122942] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP May 15 11:03:54 nanopi user.warn kernel: [ 1813.107994] RTW: send eapol packet - WPA Group Key 1/2 May 15 11:03:54 nanopi user.warn kernel: [ 1813.116539] RTW: recv eapol packet - WPA Group Key 2/2 May 15 11:03:54 nanopi daemon.info hostapd: ap0: STA 00:1f:3b:70:36:19 WPA: group key handshake completed (RSN) May 15 11:03:54 nanopi user.warn kernel: [ 1813.122942] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP May 15 11:12:22 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 11:12:22 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC [ 2413.120603] RTW: send eapol packet - WPA Group Key 1/2 [ 2413.129038] RTW: recv eapol packet - WPA Group Key 2/2 [ 2413.135505] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP May 15 11:13:54 nanopi user.warn kernel: [ 2413.120603] RTW: send eapol packet - WPA Group Key 1/2 May 15 11:13:54 nanopi user.warn kernel: [ 2413.129038] RTW: recv eapol packet - WPA Group Key 2/2 May 15 11:13:54 nanopi daemon.info hostapd: ap0: STA 00:1f:3b:70:36:19 WPA: group key handshake completed (RSN) May 15 11:13:54 nanopi user.warn kernel: [ 2413.135505] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP May 15 11:23:27 nanopi daemon.info dnsmasq-dhcp[585]: DHCPINFORM(ap0) 172.24.24.109 00:1f:3b:70:36:19 May 15 11:23:27 nanopi daemon.info dnsmasq-dhcp[585]: DHCPACK(ap0) 172.24.24.109 00:1f:3b:70:36:19 DiagnosePC [ 3013.134593] RTW: send eapol packet - WPA Group Key 1/2 [ 3013.144669] RTW: recv eapol packet - WPA Group Key 2/2 [ 3013.150957] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP May 15 11:23:54 nanopi user.warn kernel: [ 3013.134593] RTW: send eapol packet - WPA Group Key 1/2 May 15 11:23:54 nanopi user.warn kernel: [ 3013.144669] RTW: recv eapol packet - WPA Group Key 2/2 [ 3613.148419] RTW: send eapol packet - WPA Group Key 1/2 [ 3613.157212] RTW: recv eapol packet - WPA Group Key 2/2 [ 3613.164601] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.161693] RTW: send eapol packet - WPA Group Key 1/2 [ 4213.170073] RTW: recv eapol packet - WPA Group Key 2/2 [ 4213.176563] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP Terminated root@nanopi:/var/log/vecan-dbus.can0# haveged: haveged: Stopping due to signal 15 logout [ 4525.147371] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4525.157853] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4525.157853] [ 4525.173988] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4525.173988] [ 4525.184483] RTW: clear key for addr:00:1f:3b:70:36:19, camid:1 [ 4525.371435] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4525.589865] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4525.808235] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4526.026612] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 184 ms (19.8 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000223] Console: colour dummy device 80x30 [ 0.000291] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000312] pid_max: default: 32768 minimum: 301 [ 0.000460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000476] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001174] CPU: Testing write buffer coherency: ok [ 0.001525] /cpus/cpu@0 missing clock-frequency property [ 0.001551] /cpus/cpu@1 missing clock-frequency property [ 0.001569] /cpus/cpu@2 missing clock-frequency property [ 0.001588] /cpus/cpu@3 missing clock-frequency property [ 0.001600] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002188] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002315] rcu: Hierarchical SRCU implementation. [ 0.002953] smp: Bringing up secondary CPUs ... [ 0.013717] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024538] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035299] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035394] smp: Brought up 1 node, 4 CPUs [ 0.035424] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035433] CPU: All CPU(s) started in HYP mode. [ 0.035439] CPU: Virtualization extensions available. [ 0.036133] devtmpfs: initialized [ 0.041450] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041662] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043946] pinctrl core: initialized pinctrl subsystem [ 0.045128] NET: Registered protocol family 16 [ 0.046590] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047621] thermal_sys: Registered thermal governor 'step_wise' [ 0.048030] cpuidle: using governor menu [ 0.048241] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048252] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065909] cryptd: max_cpu_qlen set to 1000 [ 0.067139] vdd-sys-3v3: supplied by vdd-5v [ 0.067857] iommu: Default domain type: Translated [ 0.068107] usbcore: registered new interface driver usbfs [ 0.068156] usbcore: registered new interface driver hub [ 0.068205] usbcore: registered new device driver usb [ 0.069650] clocksource: Switched to clocksource arch_sys_counter [ 0.077084] NET: Registered protocol family 2 [ 0.077279] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.077973] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.078002] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.078048] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.078113] TCP: Hash tables configured (established 4096 bind 4096) [ 0.078237] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078286] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078443] NET: Registered protocol family 1 [ 0.079824] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081651] Initialise system trusted keyrings [ 0.081835] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085882] Key type asymmetric registered [ 0.085903] Asymmetric key parser 'x509' registered [ 0.086662] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.090425] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.092297] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.097240] Serial: 8250/16550 driver, 8 ports [ 0.117951] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700756] printk: console [ttyS0] enabled [ 0.726016] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755885] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785647] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.798046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804609] ehci-platform: EHCI generic platform driver [ 0.810298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816499] ohci-platform: OHCI generic platform driver [ 0.822836] i2c /dev entries driver [ 0.826923] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832775] i2c i2c-0: using generic GPIOs for recovery [ 0.839211] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847997] rtc-pcf8523 0-0068: registered as rtc0 [ 0.854237] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T11:50:50 UTC (1684151450) [ 0.863340] pca953x 0-0020: using no AI [ 0.871111] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879467] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889399] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891470] NET: Registered protocol family 10 [ 0.899232] Segment Routing with IPv6 [ 0.903006] NET: Registered protocol family 17 [ 0.907551] Registering SWP/SWPB emulation handler [ 0.914262] registered taskstats version 1 [ 0.914700] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.918376] Loading compiled-in X.509 certificates [ 0.919191] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.947023] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 0.994487] mmc1: new DDR MMC card at address 0001 [ 1.000246] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.005295] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.010188] random: fast init done [ 1.011759] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.021930] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.160572] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.166448] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.174643] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.209652] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.215967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.224254] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231481] usb usb1: Product: EHCI Host Controller [ 1.236355] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.242627] usb usb1: SerialNumber: 1c1b000.usb [ 1.247689] hub 1-0:1.0: USB hub found [ 1.251502] hub 1-0:1.0: 1 port detected [ 1.256310] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.262127] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.270100] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.299651] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.305918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.314194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.321424] usb usb2: Product: EHCI Host Controller [ 1.326299] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.332574] usb usb2: SerialNumber: 1c1d000.usb [ 1.337569] hub 2-0:1.0: USB hub found [ 1.341376] hub 2-0:1.0: 1 port detected [ 1.346082] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.352908] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.360849] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.433812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.442098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.449312] usb usb3: Product: Generic Platform OHCI controller [ 1.455241] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.461511] usb usb3: SerialNumber: 1c1d400.usb [ 1.466493] hub 3-0:1.0: USB hub found [ 1.470395] hub 3-0:1.0: 1 port detected [ 1.479085] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.492609] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.500824] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.508114] devtmpfs: mounted [ 1.512525] Freeing unused kernel memory: 1024K [ 1.539663] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.546829] Run /sbin/init as init process INIT: version 2.96 booting[ 1.629663] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.740863] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.749062] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.756297] usb 1-1: Product: 802.11n WLAN Adapter [ 1.761187] usb 1-1: Manufacturer: Realtek [ 1.765358] usb 1-1: SerialNumber: 00e04c000001 [ 1.803717] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.831566] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.839874] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.847065] usb 2-1: Product: USB2.0 Hub [ 1.852098] hub 2-1:1.0: USB hub found [ 1.856310] hub 2-1:1.0: 4 ports detected data partition is fine Starting udev [ 1.939331] udevd[135]: starting version 3.2.9 [ 1.954953] random: udevd: uninitialized urandom read (16 bytes read) [ 1.962038] random: udevd: uninitialized urandom read (16 bytes read) [ 1.968563] random: udevd: uninitialized urandom read (16 bytes read) [ 1.997778] udevd[136]: starting eudev-3.2.9 [ 2.138795] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.161844] CAN device driver interface [ 2.166694] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.187390] Bluetooth: Core ver 2.22 [ 2.189796] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.191351] NET: Registered protocol family 31 [ 2.193074] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.193134] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.193188] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.193260] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.212039] lima 1c40000.gpu: bus rate = 200000000 [ 2.215516] Bluetooth: HCI device and connection manager initialized [ 2.221762] lima 1c40000.gpu: mod rate = 297000000 [ 2.229912] Bluetooth: HCI socket layer initialized [ 2.234776] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.241090] Bluetooth: L2CAP socket layer initialized [ 2.248321] spi_master spi0: will run message pump with realtime priority [ 2.285943] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.286707] lima 1c40000.gpu: Failed to register cooling device [ 2.289067] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.289079] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.289171] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.289278] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.289313] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.294106] usbcore: registered new interface driver btusb [ 2.295905] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.299713] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.301642] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.305806] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.311398] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.323362] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.332830] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.338268] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.396297] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.402133] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.402146] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.402155] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.402161] usb 2-1.4: Product: USB 2.0 Hub [ 2.409063] hub 2-1.4:1.0: USB hub found [ 2.415714] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.417951] 8723du: loading out-of-tree module taints kernel. [ 2.443817] RTW: module init start [ 2.445500] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.445512] hub 2-1.4:1.0: 4 ports detected [ 2.451187] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.451193] RTW: build time: Apr 12 2023 23:27:25 [ 2.451197] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.451882] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.491154] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.500140] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.506583] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.706177] RTW: HW EFUSE [ 2.708901] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.716501] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.723939] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.731302] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.738593] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.745984] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.753387] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.760862] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.768396] RTW: [ 2.768424] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.775838] 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.782859] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.790328] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.797610] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.804819] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.811988] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.819136] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.826298] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.833430] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.840575] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.847698] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.854826] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.861956] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.869077] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.876214] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.883346] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.890481] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.897601] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.904729] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.911858] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.918980] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.919656] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 2.926110] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.940806] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.948196] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.955643] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.045011] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.049779] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.058901] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.064827] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.072657] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.079003] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.085546] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.090776] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.096081] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.101314] RTW: txpath=0x1, rxpath=0x1 [ 3.105148] RTW: txpath_1ss:0x1, num:1 [ 3.110238] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.121598] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.123789] urandom_read: 2 callbacks suppressed [ 3.123802] random: udevd: uninitialized urandom read (16 bytes read) [ 3.129427] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.136306] random: udevd: uninitialized urandom read (16 bytes read) [ 3.140664] usbcore: registered new interface driver rtl8723du [ 3.157919] RTW: module init ret=0 [ 3.196789] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.216782] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.225415] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.232912] usb 2-1.4.1: Product: FT232R USB UART [ 3.237623] usb 2-1.4.1: Manufacturer: FTDI [ 3.241823] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.260002] usbcore: registered new interface driver usbserial_generic [ 3.266638] usbserial: USB Serial support registered for generic [ 3.278806] usbcore: registered new interface driver ftdi_sio [ 3.284848] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.285789] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.292635] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.304872] usb 2-1.4.1: Detected FT232RL [ 3.310654] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.412423] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.449769] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.709434] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.718191] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.725756] usb 2-1.4.3: Product: VE Direct cable [ 3.730535] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.735825] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.744303] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.751656] usb 2-1.4.3: Detected FT-X [ 3.757171] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 3.959797] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.152128] random: dd: uninitialized urandom read (512 bytes read) [ 4.219467] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.223015] random: eeprom: uninitialized urandom read (24 bytes read) [ 4.228049] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.242100] usb 2-1.4.4: Product: VE Direct cable [ 4.246834] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.252126] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.261066] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.268372] usb 2-1.4.4: Detected FT-X [ 4.273819] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 Starting watchdog [ 4.884434] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.688808] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.922329] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. dbus-daemon[567]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=641 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) [ 6.579339] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) [ 6.596352] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found Starting crond: [ 6.603858] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.612910] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW OK [ 6.622802] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[567]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 7.818179] random: crng init done [ 9.110667] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 10:33:50 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.831268] can: controller area network core [ 11.835890] NET: Registered protocol family 29 [ 11.937370] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.600015] can: raw protocol [ 12.973511] RTW: port switch - port0(ap0), port1(wifi0) [ 13.211868] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 13.265326] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 13.529460] RTW: assoc success [ 13.533025] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.554979] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 16.114065] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.819464] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.829613] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.859760] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.878937] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.898400] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.946089] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.026107] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 613.108053] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 1213.118276] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1813.128077] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 2413.134688] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 2467.042694] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=dc 68 7d dd, CRC=0xd901) retrying. [ 3013.143510] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 3613.146987] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.154947] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP logout [ 4524.605092] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4524.615447] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4524.615447] [ U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 185 ms (19.7 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000218] Console: colour dummy device 80x30 [ 0.000288] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000309] pid_max: default: 32768 minimum: 301 [ 0.000459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000476] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001173] CPU: Testing write buffer coherency: ok [ 0.001521] /cpus/cpu@0 missing clock-frequency property [ 0.001546] /cpus/cpu@1 missing clock-frequency property [ 0.001565] /cpus/cpu@2 missing clock-frequency property [ 0.001584] /cpus/cpu@3 missing clock-frequency property [ 0.001597] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002196] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002323] rcu: Hierarchical SRCU implementation. [ 0.002954] smp: Bringing up secondary CPUs ... [ 0.013714] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024532] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035287] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035385] smp: Brought up 1 node, 4 CPUs [ 0.035413] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035422] CPU: All CPU(s) started in HYP mode. [ 0.035428] CPU: Virtualization extensions available. [ 0.036122] devtmpfs: initialized [ 0.041434] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041655] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043938] pinctrl core: initialized pinctrl subsystem [ 0.045124] NET: Registered protocol family 16 [ 0.046586] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047617] thermal_sys: Registered thermal governor 'step_wise' [ 0.048019] cpuidle: using governor menu [ 0.048231] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048243] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065890] cryptd: max_cpu_qlen set to 1000 [ 0.067122] vdd-sys-3v3: supplied by vdd-5v [ 0.067846] iommu: Default domain type: Translated [ 0.068097] usbcore: registered new interface driver usbfs [ 0.068144] usbcore: registered new interface driver hub [ 0.068191] usbcore: registered new device driver usb [ 0.069632] clocksource: Switched to clocksource arch_sys_counter [ 0.077140] NET: Registered protocol family 2 [ 0.077338] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.078088] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.078121] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.078166] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.078230] TCP: Hash tables configured (established 4096 bind 4096) [ 0.078356] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078405] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078564] NET: Registered protocol family 1 [ 0.079917] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081601] Initialise system trusted keyrings [ 0.081782] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085826] Key type asymmetric registered [ 0.085845] Asymmetric key parser 'x509' registered [ 0.086576] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.090290] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.092234] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.097187] Serial: 8250/16550 driver, 8 ports [ 0.117904] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700662] printk: console [ttyS0] enabled [ 0.725918] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755772] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785604] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.797978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804542] ehci-platform: EHCI generic platform driver [ 0.810215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816410] ohci-platform: OHCI generic platform driver [ 0.822713] i2c /dev entries driver [ 0.826758] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832605] i2c i2c-0: using generic GPIOs for recovery [ 0.839044] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847832] rtc-pcf8523 0-0068: registered as rtc0 [ 0.854067] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T13:07:57 UTC (1684156077) [ 0.863194] pca953x 0-0020: using no AI [ 0.871423] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879856] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889793] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891853] NET: Registered protocol family 10 [ 0.899710] Segment Routing with IPv6 [ 0.903468] NET: Registered protocol family 17 [ 0.908013] Registering SWP/SWPB emulation handler [ 0.914628] registered taskstats version 1 [ 0.915124] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.918740] Loading compiled-in X.509 certificates [ 0.919554] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.947371] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 0.994490] random: fast init done [ 0.997954] mmc1: new DDR MMC card at address 0001 [ 1.003696] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.008723] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.015200] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.022747] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.160569] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.166437] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.174577] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.209644] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.215988] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.224279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231504] usb usb1: Product: EHCI Host Controller [ 1.236379] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.242653] usb usb1: SerialNumber: 1c1b000.usb [ 1.247729] hub 1-0:1.0: USB hub found [ 1.251556] hub 1-0:1.0: 1 port detected [ 1.256345] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.262160] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.270142] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.299640] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.305902] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.314180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.321408] usb usb2: Product: EHCI Host Controller [ 1.326283] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.332559] usb usb2: SerialNumber: 1c1d000.usb [ 1.337566] hub 2-0:1.0: USB hub found [ 1.341367] hub 2-0:1.0: 1 port detected [ 1.346071] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.352916] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.360874] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.433805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.442093] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.449308] usb usb3: Product: Generic Platform OHCI controller [ 1.455236] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.461507] usb usb3: SerialNumber: 1c1d400.usb [ 1.466473] hub 3-0:1.0: USB hub found [ 1.470331] hub 3-0:1.0: 1 port detected [ 1.479003] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.492502] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.500720] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.508014] devtmpfs: mounted [ 1.512401] Freeing unused kernel memory: 1024K [ 1.539652] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.546846] Run /sbin/init as init process INIT: version 2.96 booting[ 1.629658] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.740925] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.749168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.756450] usb 1-1: Product: 802.11n WLAN Adapter [ 1.761342] usb 1-1: Manufacturer: Realtek [ 1.765490] usb 1-1: SerialNumber: 00e04c000001 [ 1.794425] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.831744] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.840055] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.847248] usb 2-1: Product: USB2.0 Hub [ 1.852234] hub 2-1:1.0: USB hub found data partition is fine [ 1.856478] hub 2-1:1.0: 4 ports detected Starting udev [ 1.931421] udevd[135]: starting version 3.2.9 [ 1.947053] random: udevd: uninitialized urandom read (16 bytes read) [ 1.954106] random: udevd: uninitialized urandom read (16 bytes read) [ 1.960673] random: udevd: uninitialized urandom read (16 bytes read) [ 1.989518] udevd[137]: starting eudev-3.2.9 [ 2.151774] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.172367] CAN device driver interface [ 2.173762] Bluetooth: Core ver 2.22 [ 2.180083] NET: Registered protocol family 31 [ 2.182286] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.184558] Bluetooth: HCI device and connection manager initialized [ 2.184592] Bluetooth: HCI socket layer initialized [ 2.184623] Bluetooth: L2CAP socket layer initialized [ 2.189716] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.199228] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.221645] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.227820] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.233891] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.239799] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.239827] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.256070] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.256601] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.260618] spi_master spi0: will run message pump with realtime priority [ 2.263367] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.263378] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.263385] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.263407] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.268237] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.269795] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.276547] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.283785] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.335259] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.348519] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.349492] 8723du: loading out-of-tree module taints kernel. [ 2.355473] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.367050] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.383222] usbcore: registered new interface driver btusb [ 2.384730] lima 1c40000.gpu: bus rate = 200000000 [ 2.393746] lima 1c40000.gpu: mod rate = 297000000 [ 2.398826] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.401068] RTW: module init start [ 2.402221] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.402246] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.402256] usb 2-1.4: Product: USB 2.0 Hub [ 2.403786] hub 2-1.4:1.0: USB hub found [ 2.404998] hub 2-1.4:1.0: 4 ports detected [ 2.412976] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.418768] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.418776] RTW: build time: Apr 12 2023 23:27:25 [ 2.418781] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.456586] lima 1c40000.gpu: Failed to register cooling device [ 2.460751] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.466530] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.472030] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.494802] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.502743] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.729167] RTW: HW EFUSE [ 2.732106] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.739355] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.746648] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.754047] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.761257] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.768377] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.775484] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.782592] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.787789] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.789709] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.802035] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.809135] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.816246] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.823360] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.829645] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 2.830466] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.844868] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.851978] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.859082] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.866195] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.873305] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.880415] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.887519] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.894621] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.901732] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.908832] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.915936] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.923041] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.930217] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.937374] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.944616] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.951817] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.958974] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.966192] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.973597] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.062182] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.066901] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.076056] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.082007] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.089852] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.096200] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.096314] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.102739] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.102749] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.111270] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.116482] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.121805] usb 2-1.4.1: Product: FT232R USB UART [ 3.129261] RTW: txpath=0x1, rxpath=0x1 [ 3.134485] usb 2-1.4.1: Manufacturer: FTDI [ 3.139185] RTW: txpath_1ss:0x1, num:1 [ 3.143015] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.148426] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.154029] urandom_read: 2 callbacks suppressed [ 3.154041] random: udevd: uninitialized urandom read (16 bytes read) [ 3.157948] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.167365] random: udevd: uninitialized urandom read (16 bytes read) [ 3.170662] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.196652] usbcore: registered new interface driver rtl8723du [ 3.199772] usbcore: registered new interface driver usbserial_generic [ 3.202625] RTW: module init ret=0 [ 3.209212] usbserial: USB Serial support registered for generic [ 3.226276] usbcore: registered new interface driver ftdi_sio [ 3.232399] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.239949] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.240342] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.252314] usb 2-1.4.1: Detected FT232RL [ 3.257516] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.330823] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.360079] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.472249] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.619792] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.628378] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.636056] usb 2-1.4.3: Product: VE Direct cable [ 3.640866] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.646165] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.654790] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.662194] usb 2-1.4.3: Detected FT-X [ 3.668002] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 3.869802] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.129811] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.138374] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.146034] usb 2-1.4.4: Product: VE Direct cable [ 4.150878] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.156145] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.165186] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.172574] usb 2-1.4.4: Detected FT-X [ 4.177982] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 [ 4.219297] random: dd: uninitialized urandom read (512 bytes read) [ 4.290163] random: eeprom: uninitialized urandom read (24 bytes read) Starting watchdog [ 4.936724] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.738645] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.975424] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. Starting crond: OK dbus-daemon[562]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=637 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) [ 6.655919] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) [ 6.666272] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 6.673802] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.681552] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 6.688973] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[562]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 7.704011] random: crng init done [ 9.236984] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 11:50:58 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.883523] can: controller area network core [ 11.888203] NET: Registered protocol family 29 [ 12.004231] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.674073] can: raw protocol [ 13.123691] RTW: port switch - port0(ap0), port1(wifi0) [ 13.830675] RTW: assoc success [ 13.834515] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.859881] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 16.471021] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.505840] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 16.723888] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.260894] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.305802] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.404654] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.470567] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.560631] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.766563] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.775316] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 613.313482] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 1074.636695] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=14 b5 91 e5, CRC=0x1f1b) retrying. [ 1213.320751] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1358.846914] RTW: ============ STA [00:1f:3b:70:36:19] =================== [ 1358.853879] RTW: mac_id : 2 [ 1358.856675] RTW: wireless_mode : 0x03 [ 1358.860382] RTW: mimo_type : 0 [ 1358.863467] RTW: static smps : N [ 1358.866699] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz [ 1358.871707] RTW: rate_id : 6 [ 1358.874596] RTW: rssi : -1 (%), rssi_level : 0 [ 1358.879041] RTW: is_support_sgi : N, is_vht_enable : N [ 1358.884225] RTW: disable_ra : N, disable_pt : N [ 1358.888756] RTW: is_noisy : N [ 1358.891754] RTW: txrx_state : 0 [ 1358.894906] RTW: curr_tx_rate : CCK_1M (L) [ 1358.899000] RTW: curr_tx_bw : 20MHz [ 1358.902510] RTW: curr_retry_ratio : 0 [ 1358.906182] RTW: ra_mask : 0x0000000000000fff [ 1358.906182] [ 1358.915077] RTW: send eapol packet 1/4 [ 1358.921483] RTW: recv eapol packet 2/4 [ 1358.926091] RTW: send eapol packet 3/4 [ 1358.932685] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1358.933073] RTW: recv eapol packet 4/4 [ 1358.947431] RTW: set pairwise key camid:1, addr:00:1f:3b:70:36:19, kid:0, type:TKIP