Dec 15 18:50:31 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 15 18:50:31 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 6 <UP>
Dec 15 18:50:31 nanopi user.info kernel: [   13.348525] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 15 18:50:31 nanopi user.info kernel: [   13.794008] can: raw protocol
Dec 15 18:50:33 nanopi daemon.info connmand[612]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 15 18:50:33 nanopi daemon.info connmand[612]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 15 18:50:33 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 15 18:50:33 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 15 18:50:33 nanopi user.info kernel: [   15.209314] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 15 18:50:33 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 15 18:50:33 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 15 18:50:33 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv4 for mDNS.
Dec 15 18:50:33 nanopi daemon.info avahi-daemon[586]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 15 18:50:33 nanopi daemon.info connmand[612]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 15 18:50:34 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully claimed IP address 169.254.9.211
Dec 15 18:50:35 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 15 18:50:35 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv6 for mDNS.
Dec 15 18:50:35 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 15 18:50:42 nanopi user.info kernel: [   24.440164] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 15 18:50:42 nanopi authpriv.notice login[1654]: ROOT LOGIN  on '/dev/ttyS0'
Dec 15 18:51:04 nanopi daemon.info connmand[612]: ntp: time slew +1.429344 s
Dec 15 18:52:47 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 15 18:54:58 nanopi daemon.warn connmand[612]: Online check failed for 0x15bf3a8 Wired
Dec 15 19:28:26 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 19:28:26 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 19:28:27 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 15 19:28:27 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 19:28:27 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 15 19:28:57 nanopi daemon.info connmand[612]: ntp: time slew -0.109558 s
Dec 15 19:34:39 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 19:41:55 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 19:48:13 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 19:55:23 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 20:01:37 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 20:22:29 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 20:28:41 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 20:53:07 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 20:59:23 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 21:24:19 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 15 21:24:19 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 15 21:24:30 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 21:24:30 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 21:28:57 nanopi daemon.info connmand[612]: ntp: time slew -0.350003 s
Dec 15 22:37:17 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 22:37:17 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 15 22:37:19 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 15 22:37:19 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 22:37:19 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 15 22:37:49 nanopi daemon.info connmand[612]: ntp: time slew -0.201588 s
Dec 15 22:43:29 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 22:51:52 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 22:58:05 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 23:01:48 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 23:08:04 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 23:15:12 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 23:21:28 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 15 23:45:57 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 15 23:55:51 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 00:20:50 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 00:20:50 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 00:21:19 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 00:21:19 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 00:28:47 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 00:28:47 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 00:28:49 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 00:28:49 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 00:28:49 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 00:29:19 nanopi daemon.info connmand[612]: ntp: time slew -0.325774 s
Dec 16 00:35:01 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 00:37:20 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 00:43:38 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 01:01:51 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 01:08:07 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 01:33:07 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 01:33:07 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 01:33:15 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 01:33:15 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 01:33:45 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 01:33:45 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 01:33:47 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 01:33:47 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 01:33:47 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 01:34:17 nanopi daemon.info connmand[612]: ntp: time slew -0.190105 s
Dec 16 01:39:57 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 01:53:17 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 01:59:34 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 02:05:01 nanopi cron.info CROND[13352]: (root) CMD (/opt/victronenergy/swupdate-scripts/check-updates.sh -auto -delay)
Dec 16 02:05:01 nanopi cron.info CROND[13351]: (root) CMDOUT (*** Checking for updates ***)
Dec 16 02:05:01 nanopi cron.info CROND[13351]: (root) CMDOUT (arguments: -auto -delay)
Dec 16 02:05:01 nanopi cron.info CROND[13351]: (root) CMDOUT (Sleeping for 3203 seconds)
Dec 16 02:06:55 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 02:13:09 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 02:38:06 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 02:38:06 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 02:38:09 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 02:38:09 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 02:41:13 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 02:41:13 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 02:41:14 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 02:41:14 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 02:41:14 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 02:41:44 nanopi daemon.info connmand[612]: ntp: time slew -0.197236 s
Dec 16 02:47:27 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 02:58:24 nanopi cron.info CROND[13351]: (root) CMDOUT (Retrieving latest version... (from https://updates.victronenergy.com/feeds/venus/release/images/nanopi/venus-swu-large-nanopi.swu))
Dec 16 02:58:26 nanopi cron.info CROND[13351]: (root) CMDOUT (installed: 20221016213031 v2.92)
Dec 16 02:58:26 nanopi cron.info CROND[13351]: (root) CMDOUT (available: 20221016213031 v2.92)
Dec 16 02:58:26 nanopi cron.info CROND[13351]: (root) CMDOUT (No newer version available, exit.)
Dec 16 03:12:27 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 03:12:27 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 03:12:34 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 03:12:34 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 04:41:44 nanopi daemon.info connmand[612]: ntp: time slew -0.350782 s
Dec 16 05:38:29 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 05:38:29 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 05:38:30 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 05:38:30 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 05:38:30 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 05:39:01 nanopi daemon.info connmand[612]: ntp: time slew -0.166360 s
Dec 16 05:44:45 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 06:09:40 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 06:09:40 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 06:09:55 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 06:09:55 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 07:39:00 nanopi daemon.info connmand[612]: ntp: time slew -0.354049 s
Dec 16 07:47:55 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 07:47:55 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 07:47:56 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 07:47:56 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 07:47:57 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 07:48:27 nanopi daemon.info connmand[612]: ntp: time slew -0.027775 s
Dec 16 07:54:07 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 08:19:06 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 08:19:06 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 08:19:06 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 08:19:06 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 09:29:36 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 09:29:36 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 09:29:38 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 09:29:38 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 09:29:38 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 09:30:09 nanopi daemon.info connmand[612]: ntp: time slew -0.298067 s
Dec 16 09:35:50 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 09:49:04 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 09:55:17 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 10:20:14 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 10:20:14 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 10:20:15 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 10:20:15 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 11:07:45 nanopi daemon.info connmand[612]: eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 11:07:45 nanopi daemon.info connmand[612]: ll-eth0 {add} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 11:07:46 nanopi daemon.info connmand[612]: ll-eth0 {add} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null) family 10
Dec 16 11:07:46 nanopi daemon.info avahi-daemon[586]: Registering new address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:07:46 nanopi daemon.info connmand[612]: eth0 {add} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 11:08:17 nanopi daemon.info connmand[612]: ntp: time slew -0.284310 s
Dec 16 11:13:57 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a on eth0.
Dec 16 11:38:54 nanopi daemon.info connmand[612]: ll-eth0 {del} address fdeb:28a5:5bda:4844:38b8:62ff:fe55:9dc7/64 label (null)
Dec 16 11:38:54 nanopi daemon.info connmand[612]: eth0 {del} address fdeb:28a5:5bda:4844:81:c2ff:fe2d:fd9a/64 label (null)
Dec 16 11:39:17 nanopi daemon.info connmand[612]: eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
Dec 16 11:39:17 nanopi daemon.info connmand[612]: ll-eth0 {del} route fdeb:28a5:5bda:4844:: gw :: scope 0 <UNIVERSE>
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 11:44:53 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 11:44:53 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 11:44:53 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 11:44:53 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 11:44:53 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 11:44:53 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 11:44:53 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 11:44:53 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 11:44:53 nanopi user.info kernel: [    0.000022] Switching to timer-based delay loop, resolution 41ns
Dec 16 11:44:53 nanopi user.info kernel: [    0.000215] Console: colour dummy device 80x30
Dec 16 11:44:53 nanopi user.info kernel: [    0.000283] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000304] pid_max: default: 32768 minimum: 301
Dec 16 11:44:53 nanopi user.info kernel: [    0.000440] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.000457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.001168] CPU: Testing write buffer coherency: ok
Dec 16 11:44:53 nanopi user.err kernel: [    0.001515] /cpus/cpu@0 missing clock-frequency property
Dec 16 11:44:53 nanopi user.err kernel: [    0.001541] /cpus/cpu@1 missing clock-frequency property
Dec 16 11:44:53 nanopi user.err kernel: [    0.001560] /cpus/cpu@2 missing clock-frequency property
Dec 16 11:44:53 nanopi user.err kernel: [    0.001579] /cpus/cpu@3 missing clock-frequency property
Dec 16 11:44:53 nanopi user.info kernel: [    0.001592] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 11:44:53 nanopi user.info kernel: [    0.002179] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 11:44:53 nanopi user.info kernel: [    0.002308] rcu: Hierarchical SRCU implementation.
Dec 16 11:44:53 nanopi user.info kernel: [    0.002938] smp: Bringing up secondary CPUs ...
Dec 16 11:44:53 nanopi user.info kernel: [    0.013694] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 11:44:53 nanopi user.info kernel: [    0.024512] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 11:44:53 nanopi user.info kernel: [    0.035275] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 11:44:53 nanopi user.info kernel: [    0.035374] smp: Brought up 1 node, 4 CPUs
Dec 16 11:44:53 nanopi user.info kernel: [    0.035404] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 11:44:53 nanopi user.info kernel: [    0.035413] CPU: All CPU(s) started in HYP mode.
Dec 16 11:44:53 nanopi user.info kernel: [    0.035419] CPU: Virtualization extensions available.
Dec 16 11:44:53 nanopi user.info kernel: [    0.036116] devtmpfs: initialized
Dec 16 11:44:53 nanopi user.info kernel: [    0.041408] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 11:44:53 nanopi user.info kernel: [    0.041607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 11:44:53 nanopi user.info kernel: [    0.041637] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.043926] pinctrl core: initialized pinctrl subsystem
Dec 16 11:44:53 nanopi user.info kernel: [    0.045082] NET: Registered protocol family 16
Dec 16 11:44:53 nanopi user.info kernel: [    0.046567] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 11:44:53 nanopi user.info kernel: [    0.047600] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 11:44:53 nanopi user.info kernel: [    0.047999] cpuidle: using governor menu
Dec 16 11:44:53 nanopi user.info kernel: [    0.048211] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 11:44:53 nanopi user.info kernel: [    0.048223] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 11:44:53 nanopi user.info kernel: [    0.065473] cryptd: max_cpu_qlen set to 1000
Dec 16 11:44:53 nanopi user.info kernel: [    0.066695] vdd-sys-3v3: supplied by vdd-5v
Dec 16 11:44:53 nanopi user.info kernel: [    0.067357] iommu: Default domain type: Translated 
Dec 16 11:44:53 nanopi user.info kernel: [    0.067603] usbcore: registered new interface driver usbfs
Dec 16 11:44:53 nanopi user.info kernel: [    0.067671] usbcore: registered new interface driver hub
Dec 16 11:44:53 nanopi user.info kernel: [    0.067718] usbcore: registered new device driver usb
Dec 16 11:44:53 nanopi user.info kernel: [    0.069165] clocksource: Switched to clocksource arch_sys_counter
Dec 16 11:44:53 nanopi user.info kernel: [    0.076395] NET: Registered protocol family 2
Dec 16 11:44:53 nanopi user.info kernel: [    0.076586] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077317] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077352] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077397] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077462] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077591] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077640] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:44:53 nanopi user.info kernel: [    0.077796] NET: Registered protocol family 1
Dec 16 11:44:53 nanopi user.info kernel: [    0.079038] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 11:44:53 nanopi user.notice kernel: [    0.080821] Initialise system trusted keyrings
Dec 16 11:44:53 nanopi user.info kernel: [    0.081015] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 11:44:53 nanopi user.notice kernel: [    0.085069] Key type asymmetric registered
Dec 16 11:44:53 nanopi user.notice kernel: [    0.085089] Asymmetric key parser 'x509' registered
Dec 16 11:44:53 nanopi user.err kernel: [    0.085816] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 11:44:53 nanopi user.info kernel: [    0.089537] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.091454] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.096418] Serial: 8250/16550 driver, 8 ports
Dec 16 11:44:53 nanopi user.info kernel: [    0.117287] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 11:44:53 nanopi user.info kernel: [    0.699836] printk: console [ttyS0] enabled
Dec 16 11:44:53 nanopi user.info kernel: [    0.725092] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 11:44:53 nanopi user.info kernel: [    0.754907] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 11:44:53 nanopi user.info kernel: [    0.784786] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 11:44:53 nanopi user.info kernel: [    0.795900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.802457] ehci-platform: EHCI generic platform driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.808115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.814326] ohci-platform: OHCI generic platform driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.820763] i2c /dev entries driver
Dec 16 11:44:53 nanopi user.info kernel: [    0.824854] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 11:44:53 nanopi user.info kernel: [    0.830702] i2c i2c-0: using generic GPIOs for recovery
Dec 16 11:44:53 nanopi user.info kernel: [    0.837163] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 11:44:53 nanopi user.info kernel: [    0.845952] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 11:44:53 nanopi user.info kernel: [    0.852193] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T11:44:46 UTC (1671191086)
Dec 16 11:44:53 nanopi user.info kernel: [    0.861280] pca953x 0-0020: using no AI
Dec 16 11:44:53 nanopi user.info kernel: [    0.869542] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 11:44:53 nanopi user.info kernel: [    0.878063] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 11:44:53 nanopi user.info kernel: [    0.888006] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 11:44:53 nanopi user.info kernel: [    0.890071] NET: Registered protocol family 10
Dec 16 11:44:53 nanopi user.info kernel: [    0.897784] Segment Routing with IPv6
Dec 16 11:44:53 nanopi user.info kernel: [    0.901555] NET: Registered protocol family 17
Dec 16 11:44:53 nanopi user.notice kernel: [    0.906099] Registering SWP/SWPB emulation handler
Dec 16 11:44:53 nanopi user.info kernel: [    0.911824] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:44:53 nanopi user.info kernel: [    0.912748] registered taskstats version 1
Dec 16 11:44:53 nanopi user.info kernel: [    0.917785] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:44:53 nanopi user.notice kernel: [    0.929900] Loading compiled-in X.509 certificates
Dec 16 11:44:53 nanopi user.info kernel: [    0.944539] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 11:44:53 nanopi user.notice kernel: [    0.990111] random: fast init done
Dec 16 11:44:53 nanopi user.info kernel: [    0.993556] mmc1: new DDR MMC card at address 0001
Dec 16 11:44:53 nanopi user.info kernel: [    0.999331] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 11:44:53 nanopi user.info kernel: [    1.004345] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 11:44:53 nanopi user.info kernel: [    1.010943] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 11:44:53 nanopi user.info kernel: [    1.018482]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 11:44:53 nanopi user.info kernel: [    1.160065] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.165932] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 11:44:53 nanopi user.info kernel: [    1.174081] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 11:44:53 nanopi user.info kernel: [    1.209181] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:44:53 nanopi user.info kernel: [    1.215501] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:44:53 nanopi user.info kernel: [    1.223796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:44:53 nanopi user.info kernel: [    1.231022] usb usb1: Product: EHCI Host Controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.235898] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:44:53 nanopi user.info kernel: [    1.242171] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 11:44:53 nanopi user.info kernel: [    1.247244] hub 1-0:1.0: USB hub found
Dec 16 11:44:53 nanopi user.info kernel: [    1.251055] hub 1-0:1.0: 1 port detected
Dec 16 11:44:53 nanopi user.info kernel: [    1.255832] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.261633] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 11:44:53 nanopi user.info kernel: [    1.269621] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 11:44:53 nanopi user.info kernel: [    1.299169] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:44:53 nanopi user.info kernel: [    1.305452] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:44:53 nanopi user.info kernel: [    1.313735] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:44:53 nanopi user.info kernel: [    1.320960] usb usb2: Product: EHCI Host Controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.325835] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:44:53 nanopi user.info kernel: [    1.332118] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 11:44:53 nanopi user.info kernel: [    1.337089] hub 2-0:1.0: USB hub found
Dec 16 11:44:53 nanopi user.info kernel: [    1.340890] hub 2-0:1.0: 1 port detected
Dec 16 11:44:53 nanopi user.info kernel: [    1.345650] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.352505] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 11:44:53 nanopi user.info kernel: [    1.360502] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 11:44:53 nanopi user.info kernel: [    1.433332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:44:53 nanopi user.info kernel: [    1.441628] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:44:53 nanopi user.info kernel: [    1.448844] usb usb3: Product: Generic Platform OHCI controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.454773] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:44:53 nanopi user.info kernel: [    1.461043] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 11:44:53 nanopi user.info kernel: [    1.466033] hub 3-0:1.0: USB hub found
Dec 16 11:44:53 nanopi user.info kernel: [    1.469920] hub 3-0:1.0: 1 port detected
Dec 16 11:44:53 nanopi user.info kernel: [    1.474615] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.481561] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 11:44:53 nanopi user.info kernel: [    1.489560] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 11:44:53 nanopi user.info kernel: [    1.539179] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 11:44:53 nanopi user.info kernel: [    1.563388] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:44:53 nanopi user.info kernel: [    1.571667] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:44:53 nanopi user.info kernel: [    1.578881] usb usb4: Product: Generic Platform OHCI controller
Dec 16 11:44:53 nanopi user.info kernel: [    1.584809] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:44:53 nanopi user.info kernel: [    1.591084] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 11:44:53 nanopi user.info kernel: [    1.596100] hub 4-0:1.0: USB hub found
Dec 16 11:44:53 nanopi user.info kernel: [    1.599977] hub 4-0:1.0: 1 port detected
Dec 16 11:44:53 nanopi user.info kernel: [    1.608669] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 11:44:53 nanopi user.info kernel: [    1.621730] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 11:44:53 nanopi user.info kernel: [    1.629052] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 11:44:53 nanopi user.info kernel: [    1.680439] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 11:44:53 nanopi user.info kernel: [    1.685662] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:44:53 nanopi user.info kernel: [    1.693884] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 11:44:53 nanopi user.info kernel: [    1.701338] devtmpfs: mounted
Dec 16 11:44:53 nanopi user.info kernel: [    1.705694] Freeing unused kernel memory: 1024K
Dec 16 11:44:53 nanopi user.info kernel: [    1.710424] Run /sbin/init as init process
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714518]   with arguments:
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714523]     /sbin/init
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714527]     5
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714530]   with environment:
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714535]     HOME=/
Dec 16 11:44:53 nanopi user.debug kernel: [    1.714539]     TERM=linux
Dec 16 11:44:53 nanopi user.warn kernel: [    1.749926] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.759631] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.769222] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.778877] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.788472] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.799507] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.809401] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.819047] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.828619] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.838276] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.847855] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.847868] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.867075] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.877003] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 11:44:53 nanopi user.warn kernel: [    1.886609] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 11:44:53 nanopi user.info kernel: [    1.896414] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:44:53 nanopi user.info kernel: [    1.904039] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 11:44:53 nanopi user.info kernel: [    1.912324] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:44:53 nanopi user.info kernel: [    1.919497] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 11:44:53 nanopi user.info kernel: [    1.924307] usb 1-1: Manufacturer: Realtek
Dec 16 11:44:53 nanopi user.info kernel: [    1.928425] usb 1-1: SerialNumber: 00e04c000001
Dec 16 11:44:53 nanopi user.info kernel: [    1.933823] usb 1-1: skipping disabled interface 0
Dec 16 11:44:53 nanopi user.info kernel: [    1.938654] usb 1-1: skipping disabled interface 1
Dec 16 11:44:53 nanopi user.info kernel: [    2.049265] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:44:53 nanopi user.info kernel: [    2.213228] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 11:44:53 nanopi user.info kernel: [    2.221440] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:44:53 nanopi user.info kernel: [    2.228570] usb 3-1: Product: VE SLCAN Interface
Dec 16 11:44:53 nanopi user.info kernel: [    2.233201] usb 3-1: Manufacturer: Victron Energy
Dec 16 11:44:53 nanopi user.info kernel: [    2.237915] usb 3-1: SerialNumber: D307F4KH
Dec 16 11:44:53 nanopi user.info kernel: [    2.287803] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 11:44:53 nanopi user.info kernel: [    2.292901] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:44:53 nanopi user.info kernel: [    2.331335] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 11:44:53 nanopi user.info kernel: [    2.339658] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:44:53 nanopi user.info kernel: [    2.346832] usb 4-1: Product: FT232R USB UART
Dec 16 11:44:53 nanopi user.info kernel: [    2.351304] usb 4-1: Manufacturer: FTDI
Dec 16 11:44:53 nanopi user.info kernel: [    2.355175] usb 4-1: SerialNumber: AG0KG587
Dec 16 11:44:53 nanopi daemon.info kernel: [    2.426702] udevd[132]: starting version 3.2.9
Dec 16 11:44:53 nanopi user.notice kernel: [    2.443607] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:44:53 nanopi user.notice kernel: [    2.450699] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:44:53 nanopi user.notice kernel: [    2.457224] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:44:53 nanopi daemon.info kernel: [    2.487039] udevd[133]: starting eudev-3.2.9
Dec 16 11:44:53 nanopi user.warn kernel: [    2.617984] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 11:44:53 nanopi user.info kernel: [    2.656251] usbcore: registered new interface driver usbserial_generic
Dec 16 11:44:53 nanopi user.notice kernel: [    2.658154] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 11:44:53 nanopi user.info kernel: [    2.663026] usbserial: USB Serial support registered for generic
Dec 16 11:44:53 nanopi user.info kernel: [    2.677737] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 11:44:53 nanopi user.info kernel: [    2.684483] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 11:44:53 nanopi user.info kernel: [    2.691039] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 11:44:53 nanopi user.info kernel: [    2.693700] usbcore: registered new interface driver ftdi_sio
Dec 16 11:44:53 nanopi user.info kernel: [    2.697415] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 11:44:53 nanopi user.info kernel: [    2.703953] lima 1c40000.gpu: bus rate = 200000000
Dec 16 11:44:53 nanopi user.info kernel: [    2.711636] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 11:44:53 nanopi user.info kernel: [    2.716346] lima 1c40000.gpu: mod rate = 297000000
Dec 16 11:44:53 nanopi user.info kernel: [    2.723949] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:44:53 nanopi user.err kernel: [    2.728617] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 11:44:53 nanopi user.info kernel: [    2.735883] usb 3-1: Detected FT-X
Dec 16 11:44:53 nanopi user.info kernel: [    2.749679] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 11:44:53 nanopi user.notice kernel: [    2.754450] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 11:44:53 nanopi user.info kernel: [    2.756101] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 11:44:53 nanopi user.info kernel: [    2.768938] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 11:44:53 nanopi user.info kernel: [    2.774917] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 11:44:53 nanopi user.info kernel: [    2.779498] lima 1c40000.gpu: Failed to register cooling device
Dec 16 11:44:53 nanopi user.info kernel: [    2.780019] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 11:44:53 nanopi user.info kernel: [    2.780288] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:44:53 nanopi user.info kernel: [    2.780429] usb 4-1: Detected FT232RL
Dec 16 11:44:53 nanopi user.warn kernel: [    2.780803] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 11:44:53 nanopi user.info kernel: [    2.786229] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 11:44:53 nanopi user.info kernel: [    2.787864] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 11:44:53 nanopi user.info kernel: [    2.800956] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 11:44:53 nanopi user.warn kernel: [    2.807708] 8723bu: loading out-of-tree module taints kernel.
Dec 16 11:44:53 nanopi user.info kernel: [    2.814091] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 11:44:53 nanopi user.info kernel: [    2.848741] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 11:44:53 nanopi user.info kernel: [    2.853802] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 11:44:53 nanopi user.info kernel: [    2.860629] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 11:44:53 nanopi user.info kernel: [    2.866339] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 11:44:53 nanopi user.info kernel: [    2.875691] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 11:44:53 nanopi user.info kernel: [    2.882870] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 11:44:53 nanopi user.info kernel: [    2.889410] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 11:44:53 nanopi user.info kernel: [    2.896962] CAN device driver interface
Dec 16 11:44:53 nanopi user.info kernel: [    2.907119] slcan: serial line CAN interface driver
Dec 16 11:44:53 nanopi user.info kernel: [    2.912222] slcan: 10 dynamic interface channels.
Dec 16 11:44:53 nanopi user.info kernel: [    2.925489] can0: renamed from slcan0
Dec 16 11:44:53 nanopi user.info kernel: [    3.106011] usbcore: registered new interface driver rtl8723bu
Dec 16 11:44:53 nanopi user.info kernel: [    3.164194] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 11:44:53 nanopi user.info kernel: [    3.249726] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 11:44:53 nanopi user.info kernel: [    3.392802] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 11:44:53 nanopi user.warn kernel: [    4.162728] urandom_read: 4 callbacks suppressed
Dec 16 11:44:53 nanopi user.notice kernel: [    4.162741] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 11:44:53 nanopi user.notice kernel: [    4.244586] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 11:44:53 nanopi user.crit kernel: [    4.837068] watchdog: watchdog0: watchdog did not stop!
Dec 16 11:44:53 nanopi user.notice kernel: [    6.732825] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 11:44:53 nanopi user.info kernel: [    6.930244] Bluetooth: Core ver 2.22
Dec 16 11:44:53 nanopi user.info kernel: [    6.934091] NET: Registered protocol family 31
Dec 16 11:44:53 nanopi user.info kernel: [    6.938576] Bluetooth: HCI device and connection manager initialized
Dec 16 11:44:53 nanopi user.info kernel: [    6.945140] Bluetooth: HCI socket layer initialized
Dec 16 11:44:53 nanopi user.info kernel: [    6.950152] Bluetooth: L2CAP socket layer initialized
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Successfully dropped root privileges.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: avahi-daemon 0.7 starting up.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Successfully called chroot().
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Successfully dropped remaining capabilities.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Loading service file /services/garmin.service.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Loading service file /services/raymarine.service.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Network interface enumeration completed.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Server startup complete. Host name is venus.local. Local service cookie is 700752814.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 11:44:53 nanopi user.notice kernel: [    7.150336] random: crng init done
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Connection Manager version 1.33
Dec 16 11:44:53 nanopi daemon.err connmand[613]: iptables support missing error 2 (No such file or directory)
Dec 16 11:44:53 nanopi daemon.warn connmand[613]: Failed to flush table 'mangle': Invalid argument
Dec 16 11:44:53 nanopi daemon.err connmand[613]: iptables support missing error 2 (No such file or directory)
Dec 16 11:44:53 nanopi daemon.warn connmand[613]: Failed to flush table 'nat': Invalid argument
Dec 16 11:44:53 nanopi daemon.err connmand[613]: iptables support missing error 2 (No such file or directory)
Dec 16 11:44:53 nanopi daemon.warn connmand[613]: Failed to install iptables rules: Invalid argument
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Checking loopback interface settings
Dec 16 11:44:53 nanopi daemon.info connmand[613]: System hostname is nanopi
Dec 16 11:44:53 nanopi daemon.info dbus-daemon[549]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=613 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 11:44:53 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 11:44:53 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully called chroot().
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {update} flags 4098 <DOWN>
Dec 16 11:44:53 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully dropped root privileges.
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Starting with address 169.254.5.41
Dec 16 11:44:53 nanopi user.info kernel: [    7.554682] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 11:44:53 nanopi user.info kernel: [    7.572164] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 11:44:53 nanopi user.info kernel: [    7.579897] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 11:44:53 nanopi user.warn kernel: [    7.587750] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Adding interface eth0 [ ethernet ]
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 address 7A:74:48:D9:02:1D mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 11:44:53 nanopi daemon.info connmand[613]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:44:53 nanopi daemon.info connmand[613]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 address 7A:74:48:D9:02:1D mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:44:53 nanopi user.info kernel: [    7.595758] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 11:44:53 nanopi user.info kernel: [    7.606528] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {update} flags 4098 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Adding interface wifi0 [ wifi ]
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {update} flags 4099 <UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Ignoring interface ap0 (filtered)
Dec 16 11:44:53 nanopi user.info kernel: [    7.615356] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Adding interface ap0 [ wifi ]
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 address 7A:74:48:D9:02:1D mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {update} flags 4099 <UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 address 7A:74:48:D9:02:1D mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 11:44:53 nanopi cron.info crond[694]: (CRON) STARTUP (1.5.5)
Dec 16 11:44:53 nanopi cron.info crond[694]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 11:44:53 nanopi daemon.warn connmand[613]: Skipping disconnect of carrier, network is connecting.
Dec 16 11:44:53 nanopi cron.info crond[694]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 15% if used.)
Dec 16 11:44:53 nanopi daemon.info dbus-daemon[549]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 11:44:53 nanopi daemon.notice wpa_supplicant[672]: Successfully initialized wpa_supplicant
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 11:44:53 nanopi daemon.info avahi-daemon[587]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 11:44:53 nanopi daemon.info connmand[613]: Setting domainname to hwhb.co.uk
Dec 16 11:44:52 nanopi daemon.info dnsmasq[565]: started, version 2.83 cachesize 150
Dec 16 11:44:53 nanopi daemon.warn dnsmasq[565]: overflow: 3 log entries lost
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 address 7A:74:48:D9:02:1D mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {update} flags 36867 <UP>
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:44:53 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:44:54 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:44:54 nanopi daemon.info connmand[613]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:44:54 nanopi daemon.err connmand[613]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 11:44:54 nanopi user.warn wpa_supplicant[672]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 11:44:54 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:44:54 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:44:54 nanopi daemon.info connmand[613]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:44:54 nanopi user.info kernel: [    8.335662] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 11:44:54 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 11:44:54 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 11:44:54 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 7.99736
Dec 16 11:44:54 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 11:44:55 nanopi daemon.info connmand[613]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:44:55 nanopi daemon.info dnsmasq[565]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 11:44:55 nanopi daemon.info dnsmasq[565]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 11:44:55 nanopi daemon.info avahi-daemon[587]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:44:55 nanopi daemon.info avahi-daemon[587]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 11:44:55 nanopi daemon.info avahi-daemon[587]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:44:55 nanopi daemon.info connmand[613]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:44:58 nanopi daemon.info connmand[613]: ll-eth0 {add} address 2001:8b0:1552:697c:7874:48ff:fed9:21d/64 label (null) family 10
Dec 16 11:44:58 nanopi daemon.info connmand[613]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 11:44:58 nanopi daemon.info avahi-daemon[587]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:44:58 nanopi daemon.info avahi-daemon[587]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 11:44:58 nanopi daemon.info avahi-daemon[587]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:44:58 nanopi daemon.info avahi-daemon[587]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 11:44:59 nanopi user.info kernel: [   12.954083] can: controller area network core
Dec 16 11:44:59 nanopi user.info kernel: [   12.958753] NET: Registered protocol family 29
Dec 16 11:44:59 nanopi daemon.err connmand[613]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:44:59 nanopi daemon.info connmand[613]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 11:44:59 nanopi user.info kernel: [   13.086067] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 11:45:00 nanopi user.info kernel: [   14.061214] can: raw protocol
Dec 16 11:45:00 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Callout BIND, address 169.254.5.41 on interface ll-eth0
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ll-eth0 {add} address 169.254.5.41/16 label ll-eth0 family 2
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:45:00 nanopi daemon.info connmand[613]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 11:45:00 nanopi daemon.info connmand[613]: Ignoring interface ap0 (filtered)
Dec 16 11:45:00 nanopi daemon.info avahi-daemon[587]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 11:45:00 nanopi daemon.info avahi-daemon[587]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 11:45:00 nanopi daemon.info avahi-daemon[587]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 11:45:00 nanopi user.info kernel: [   14.855296] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 11:45:01 nanopi daemon.info avahi-daemon[587]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 11:45:01 nanopi daemon.info avahi-daemon[587]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 11:45:01 nanopi daemon.info avahi-daemon[587]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 11:45:04 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully claimed IP address 169.254.5.41
Dec 16 11:45:10 nanopi user.info kernel: [   24.224913] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:45:10 nanopi authpriv.notice login[1653]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 11:45:29 nanopi daemon.info connmand[613]: ntp: time slew +0.579512 s
Dec 16 11:45:59 nanopi daemon.info connmand[613]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:46:30 nanopi daemon.info connmand[613]: ntp: time slew -0.003445 s
Dec 16 11:47:14 nanopi daemon.err connmand[613]: Failed to find URL:http://ipv6.connman.net/online/status.html
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 11:48:33 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 11:48:33 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 11:48:33 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 11:48:33 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 11:48:33 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 11:48:33 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 11:48:33 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 11:48:33 nanopi user.info kernel: [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 11:48:33 nanopi user.info kernel: [    0.000022] Switching to timer-based delay loop, resolution 41ns
Dec 16 11:48:33 nanopi user.info kernel: [    0.000215] Console: colour dummy device 80x30
Dec 16 11:48:33 nanopi user.info kernel: [    0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000304] pid_max: default: 32768 minimum: 301
Dec 16 11:48:33 nanopi user.info kernel: [    0.000442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.000461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.001170] CPU: Testing write buffer coherency: ok
Dec 16 11:48:33 nanopi user.err kernel: [    0.001517] /cpus/cpu@0 missing clock-frequency property
Dec 16 11:48:33 nanopi user.err kernel: [    0.001544] /cpus/cpu@1 missing clock-frequency property
Dec 16 11:48:33 nanopi user.err kernel: [    0.001563] /cpus/cpu@2 missing clock-frequency property
Dec 16 11:48:33 nanopi user.err kernel: [    0.001582] /cpus/cpu@3 missing clock-frequency property
Dec 16 11:48:33 nanopi user.info kernel: [    0.001594] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 11:48:33 nanopi user.info kernel: [    0.002181] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 11:48:33 nanopi user.info kernel: [    0.002312] rcu: Hierarchical SRCU implementation.
Dec 16 11:48:33 nanopi user.info kernel: [    0.002946] smp: Bringing up secondary CPUs ...
Dec 16 11:48:33 nanopi user.info kernel: [    0.013703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 11:48:33 nanopi user.info kernel: [    0.024520] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 11:48:33 nanopi user.info kernel: [    0.035286] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 11:48:33 nanopi user.info kernel: [    0.035383] smp: Brought up 1 node, 4 CPUs
Dec 16 11:48:33 nanopi user.info kernel: [    0.035413] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 11:48:33 nanopi user.info kernel: [    0.035422] CPU: All CPU(s) started in HYP mode.
Dec 16 11:48:33 nanopi user.info kernel: [    0.035428] CPU: Virtualization extensions available.
Dec 16 11:48:33 nanopi user.info kernel: [    0.036130] devtmpfs: initialized
Dec 16 11:48:33 nanopi user.info kernel: [    0.041422] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 11:48:33 nanopi user.info kernel: [    0.041621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 11:48:33 nanopi user.info kernel: [    0.041650] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.043931] pinctrl core: initialized pinctrl subsystem
Dec 16 11:48:33 nanopi user.info kernel: [    0.045081] NET: Registered protocol family 16
Dec 16 11:48:33 nanopi user.info kernel: [    0.046566] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 11:48:33 nanopi user.info kernel: [    0.047596] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 11:48:33 nanopi user.info kernel: [    0.047993] cpuidle: using governor menu
Dec 16 11:48:33 nanopi user.info kernel: [    0.048202] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 11:48:33 nanopi user.info kernel: [    0.048214] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 11:48:33 nanopi user.info kernel: [    0.065476] cryptd: max_cpu_qlen set to 1000
Dec 16 11:48:33 nanopi user.info kernel: [    0.066687] vdd-sys-3v3: supplied by vdd-5v
Dec 16 11:48:33 nanopi user.info kernel: [    0.067348] iommu: Default domain type: Translated 
Dec 16 11:48:33 nanopi user.info kernel: [    0.067585] usbcore: registered new interface driver usbfs
Dec 16 11:48:33 nanopi user.info kernel: [    0.067651] usbcore: registered new interface driver hub
Dec 16 11:48:33 nanopi user.info kernel: [    0.067699] usbcore: registered new device driver usb
Dec 16 11:48:33 nanopi user.info kernel: [    0.069121] clocksource: Switched to clocksource arch_sys_counter
Dec 16 11:48:33 nanopi user.info kernel: [    0.076586] NET: Registered protocol family 2
Dec 16 11:48:33 nanopi user.info kernel: [    0.076783] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077471] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077502] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077548] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077613] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077744] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077795] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:48:33 nanopi user.info kernel: [    0.077952] NET: Registered protocol family 1
Dec 16 11:48:33 nanopi user.info kernel: [    0.079304] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 11:48:33 nanopi user.notice kernel: [    0.081105] Initialise system trusted keyrings
Dec 16 11:48:33 nanopi user.info kernel: [    0.081302] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 11:48:33 nanopi user.notice kernel: [    0.085351] Key type asymmetric registered
Dec 16 11:48:33 nanopi user.notice kernel: [    0.085374] Asymmetric key parser 'x509' registered
Dec 16 11:48:33 nanopi user.err kernel: [    0.086123] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 11:48:33 nanopi user.info kernel: [    0.089866] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.091766] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.096790] Serial: 8250/16550 driver, 8 ports
Dec 16 11:48:33 nanopi user.info kernel: [    0.117650] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 11:48:33 nanopi user.info kernel: [    0.700064] printk: console [ttyS0] enabled
Dec 16 11:48:33 nanopi user.info kernel: [    0.725360] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 11:48:33 nanopi user.info kernel: [    0.755164] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 11:48:33 nanopi user.info kernel: [    0.784975] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 11:48:33 nanopi user.info kernel: [    0.795987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.802545] ehci-platform: EHCI generic platform driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.808185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.814399] ohci-platform: OHCI generic platform driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.820783] i2c /dev entries driver
Dec 16 11:48:33 nanopi user.info kernel: [    0.824854] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 11:48:33 nanopi user.info kernel: [    0.830701] i2c i2c-0: using generic GPIOs for recovery
Dec 16 11:48:33 nanopi user.info kernel: [    0.837158] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 11:48:33 nanopi user.info kernel: [    0.845932] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 11:48:33 nanopi user.info kernel: [    0.852177] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T11:48:27 UTC (1671191307)
Dec 16 11:48:33 nanopi user.info kernel: [    0.861255] pca953x 0-0020: using no AI
Dec 16 11:48:33 nanopi user.info kernel: [    0.868996] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 11:48:33 nanopi user.info kernel: [    0.877500] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 11:48:33 nanopi user.info kernel: [    0.887459] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 11:48:33 nanopi user.info kernel: [    0.889567] NET: Registered protocol family 10
Dec 16 11:48:33 nanopi user.info kernel: [    0.897311] Segment Routing with IPv6
Dec 16 11:48:33 nanopi user.info kernel: [    0.901091] NET: Registered protocol family 17
Dec 16 11:48:33 nanopi user.notice kernel: [    0.905635] Registering SWP/SWPB emulation handler
Dec 16 11:48:33 nanopi user.info kernel: [    0.912299] registered taskstats version 1
Dec 16 11:48:33 nanopi user.notice kernel: [    0.916438] Loading compiled-in X.509 certificates
Dec 16 11:48:33 nanopi user.info kernel: [    0.916469] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:48:33 nanopi user.info kernel: [    0.917264] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:48:33 nanopi user.info kernel: [    0.931124] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 11:48:33 nanopi user.info kernel: [    1.006751] mmc1: new DDR MMC card at address 0001
Dec 16 11:48:33 nanopi user.notice kernel: [    1.009560] random: fast init done
Dec 16 11:48:33 nanopi user.info kernel: [    1.015507] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 11:48:33 nanopi user.info kernel: [    1.020614] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 11:48:33 nanopi user.info kernel: [    1.027058] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 11:48:33 nanopi user.info kernel: [    1.034392]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 11:48:33 nanopi user.info kernel: [    1.160031] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.165934] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 11:48:33 nanopi user.info kernel: [    1.174074] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 11:48:33 nanopi user.info kernel: [    1.209142] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:48:33 nanopi user.info kernel: [    1.215456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:48:33 nanopi user.info kernel: [    1.223745] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:48:33 nanopi user.info kernel: [    1.230971] usb usb1: Product: EHCI Host Controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.235846] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:48:33 nanopi user.info kernel: [    1.242119] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 11:48:33 nanopi user.info kernel: [    1.247181] hub 1-0:1.0: USB hub found
Dec 16 11:48:33 nanopi user.info kernel: [    1.251005] hub 1-0:1.0: 1 port detected
Dec 16 11:48:33 nanopi user.info kernel: [    1.255770] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.261568] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 11:48:33 nanopi user.info kernel: [    1.269548] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 11:48:33 nanopi user.info kernel: [    1.299132] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:48:33 nanopi user.info kernel: [    1.305417] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:48:33 nanopi user.info kernel: [    1.313697] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:48:33 nanopi user.info kernel: [    1.320923] usb usb2: Product: EHCI Host Controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.325798] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:48:33 nanopi user.info kernel: [    1.332074] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 11:48:33 nanopi user.info kernel: [    1.337071] hub 2-0:1.0: USB hub found
Dec 16 11:48:33 nanopi user.info kernel: [    1.340876] hub 2-0:1.0: 1 port detected
Dec 16 11:48:33 nanopi user.info kernel: [    1.345628] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.352464] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 11:48:33 nanopi user.info kernel: [    1.360431] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 11:48:33 nanopi user.info kernel: [    1.433297] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:48:33 nanopi user.info kernel: [    1.441584] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:48:33 nanopi user.info kernel: [    1.448798] usb usb3: Product: Generic Platform OHCI controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.454726] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:48:33 nanopi user.info kernel: [    1.460995] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 11:48:33 nanopi user.info kernel: [    1.465978] hub 3-0:1.0: USB hub found
Dec 16 11:48:33 nanopi user.info kernel: [    1.469838] hub 3-0:1.0: 1 port detected
Dec 16 11:48:33 nanopi user.info kernel: [    1.474533] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.481486] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 11:48:33 nanopi user.info kernel: [    1.489506] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 11:48:33 nanopi user.info kernel: [    1.539147] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 11:48:33 nanopi user.info kernel: [    1.563348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:48:33 nanopi user.info kernel: [    1.571626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:48:33 nanopi user.info kernel: [    1.578840] usb usb4: Product: Generic Platform OHCI controller
Dec 16 11:48:33 nanopi user.info kernel: [    1.584766] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:48:33 nanopi user.info kernel: [    1.591041] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 11:48:33 nanopi user.info kernel: [    1.596035] hub 4-0:1.0: USB hub found
Dec 16 11:48:33 nanopi user.info kernel: [    1.599912] hub 4-0:1.0: 1 port detected
Dec 16 11:48:33 nanopi user.info kernel: [    1.608653] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 11:48:33 nanopi user.info kernel: [    1.621698] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 11:48:33 nanopi user.info kernel: [    1.629018] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 11:48:33 nanopi user.info kernel: [    1.680962] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 11:48:33 nanopi user.info kernel: [    1.686203] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:48:33 nanopi user.info kernel: [    1.694429] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 11:48:33 nanopi user.info kernel: [    1.701802] devtmpfs: mounted
Dec 16 11:48:33 nanopi user.info kernel: [    1.706181] Freeing unused kernel memory: 1024K
Dec 16 11:48:33 nanopi user.info kernel: [    1.719282] Run /sbin/init as init process
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723376]   with arguments:
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723381]     /sbin/init
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723385]     5
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723388]   with environment:
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723393]     HOME=/
Dec 16 11:48:33 nanopi user.debug kernel: [    1.723397]     TERM=linux
Dec 16 11:48:33 nanopi user.warn kernel: [    1.740063] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.749770] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.749784] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.768997] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.778574] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.778586] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.797799] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.807477] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.817070] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.817081] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.836291] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.845961] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.855530] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.865223] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 11:48:33 nanopi user.warn kernel: [    1.874809] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 11:48:33 nanopi user.info kernel: [    1.884614] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:48:33 nanopi user.info kernel: [    1.892643] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 11:48:33 nanopi user.info kernel: [    1.900841] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:48:33 nanopi user.info kernel: [    1.907972] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 11:48:33 nanopi user.info kernel: [    1.912771] usb 1-1: Manufacturer: Realtek
Dec 16 11:48:33 nanopi user.info kernel: [    1.916873] usb 1-1: SerialNumber: 00e04c000001
Dec 16 11:48:33 nanopi user.info kernel: [    1.917531] usb 1-1: skipping disabled interface 0
Dec 16 11:48:33 nanopi user.info kernel: [    1.926223] usb 1-1: skipping disabled interface 1
Dec 16 11:48:33 nanopi user.info kernel: [    2.039243] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:48:33 nanopi user.info kernel: [    2.193184] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 11:48:33 nanopi user.info kernel: [    2.201415] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:48:33 nanopi user.info kernel: [    2.208546] usb 3-1: Product: VE SLCAN Interface
Dec 16 11:48:33 nanopi user.info kernel: [    2.213178] usb 3-1: Manufacturer: Victron Energy
Dec 16 11:48:33 nanopi user.info kernel: [    2.217879] usb 3-1: SerialNumber: D307F4KH
Dec 16 11:48:33 nanopi user.info kernel: [    2.296567] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 11:48:33 nanopi user.info kernel: [    2.301652] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:48:33 nanopi user.info kernel: [    2.321318] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 11:48:33 nanopi user.info kernel: [    2.329626] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:48:33 nanopi user.info kernel: [    2.336819] usb 4-1: Product: FT232R USB UART
Dec 16 11:48:33 nanopi user.info kernel: [    2.341276] usb 4-1: Manufacturer: FTDI
Dec 16 11:48:33 nanopi user.info kernel: [    2.345159] usb 4-1: SerialNumber: AG0KG587
Dec 16 11:48:33 nanopi daemon.info kernel: [    2.433951] udevd[132]: starting version 3.2.9
Dec 16 11:48:33 nanopi user.notice kernel: [    2.450620] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:48:33 nanopi user.notice kernel: [    2.457656] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:48:33 nanopi user.notice kernel: [    2.464225] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:48:33 nanopi daemon.info kernel: [    2.494369] udevd[133]: starting eudev-3.2.9
Dec 16 11:48:33 nanopi user.info kernel: [    2.645964] usbcore: registered new interface driver usbserial_generic
Dec 16 11:48:33 nanopi user.info kernel: [    2.652882] usbserial: USB Serial support registered for generic
Dec 16 11:48:33 nanopi user.warn kernel: [    2.665654] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 11:48:33 nanopi user.info kernel: [    2.682488] usbcore: registered new interface driver ftdi_sio
Dec 16 11:48:33 nanopi user.info kernel: [    2.688395] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 11:48:33 nanopi user.notice kernel: [    2.688650] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 11:48:33 nanopi user.info kernel: [    2.696130] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:48:33 nanopi user.info kernel: [    2.716346] usb 3-1: Detected FT-X
Dec 16 11:48:33 nanopi user.info kernel: [    2.731649] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 11:48:33 nanopi user.info kernel: [    2.739500] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:48:33 nanopi user.info kernel: [    2.745726] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 11:48:33 nanopi user.info kernel: [    2.746393] usb 4-1: Detected FT232RL
Dec 16 11:48:33 nanopi user.info kernel: [    2.752651] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 11:48:33 nanopi user.info kernel: [    2.762033] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 11:48:33 nanopi user.info kernel: [    2.762508] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 11:48:33 nanopi user.info kernel: [    2.775304] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 11:48:33 nanopi user.warn kernel: [    2.781253] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 11:48:33 nanopi user.notice kernel: [    2.781435] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 11:48:33 nanopi user.info kernel: [    2.791216] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 11:48:33 nanopi user.info kernel: [    2.798157] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 11:48:33 nanopi user.info kernel: [    2.804864] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 11:48:33 nanopi user.info kernel: [    2.811174] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 11:48:33 nanopi user.info kernel: [    2.818254] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 11:48:33 nanopi user.info kernel: [    2.824760] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 11:48:33 nanopi user.warn kernel: [    2.828494] 8723bu: loading out-of-tree module taints kernel.
Dec 16 11:48:33 nanopi user.info kernel: [    2.829925] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 11:48:33 nanopi user.info kernel: [    2.830008] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 11:48:33 nanopi user.info kernel: [    2.836420] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 11:48:33 nanopi user.info kernel: [    2.842148] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 11:48:33 nanopi user.info kernel: [    2.851058] lima 1c40000.gpu: bus rate = 200000000
Dec 16 11:48:33 nanopi user.info kernel: [    2.857408] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 11:48:33 nanopi user.info kernel: [    2.862832] lima 1c40000.gpu: mod rate = 297000000
Dec 16 11:48:33 nanopi user.info kernel: [    2.869343] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 11:48:33 nanopi user.err kernel: [    2.873568] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 11:48:33 nanopi user.info kernel: [    2.879552] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 11:48:33 nanopi user.info kernel: [    2.916273] CAN device driver interface
Dec 16 11:48:33 nanopi user.info kernel: [    2.919980] lima 1c40000.gpu: Failed to register cooling device
Dec 16 11:48:33 nanopi user.info kernel: [    2.923339] slcan: serial line CAN interface driver
Dec 16 11:48:33 nanopi user.info kernel: [    2.931212] slcan: 10 dynamic interface channels.
Dec 16 11:48:33 nanopi user.info kernel: [    2.950581] can0: renamed from slcan0
Dec 16 11:48:33 nanopi user.info kernel: [    2.953519] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 11:48:33 nanopi user.info kernel: [    3.165264] usbcore: registered new interface driver rtl8723bu
Dec 16 11:48:33 nanopi user.info kernel: [    3.195362] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 11:48:33 nanopi user.info kernel: [    3.249683] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 11:48:33 nanopi user.info kernel: [    3.373366] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 11:48:33 nanopi user.warn kernel: [    4.140728] urandom_read: 4 callbacks suppressed
Dec 16 11:48:33 nanopi user.notice kernel: [    4.140739] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 11:48:33 nanopi user.notice kernel: [    4.215875] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 11:48:33 nanopi user.crit kernel: [    4.801210] watchdog: watchdog0: watchdog did not stop!
Dec 16 11:48:33 nanopi user.notice kernel: [    6.712270] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 11:48:33 nanopi user.info kernel: [    6.912975] Bluetooth: Core ver 2.22
Dec 16 11:48:33 nanopi user.info kernel: [    6.916792] NET: Registered protocol family 31
Dec 16 11:48:33 nanopi user.info kernel: [    6.921362] Bluetooth: HCI device and connection manager initialized
Dec 16 11:48:33 nanopi user.info kernel: [    6.927756] Bluetooth: HCI socket layer initialized
Dec 16 11:48:33 nanopi user.info kernel: [    6.932715] Bluetooth: L2CAP socket layer initialized
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Successfully dropped root privileges.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: avahi-daemon 0.7 starting up.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Successfully called chroot().
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Successfully dropped remaining capabilities.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Loading service file /services/garmin.service.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Loading service file /services/raymarine.service.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Network interface enumeration completed.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Server startup complete. Host name is venus.local. Local service cookie is 2512685512.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Connection Manager version 1.33
Dec 16 11:48:33 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 11:48:33 nanopi daemon.warn connmand[611]: Failed to flush table 'mangle': Invalid argument
Dec 16 11:48:33 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 11:48:33 nanopi daemon.warn connmand[611]: Failed to flush table 'nat': Invalid argument
Dec 16 11:48:33 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 11:48:33 nanopi daemon.warn connmand[611]: Failed to install iptables rules: Invalid argument
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Checking loopback interface settings
Dec 16 11:48:33 nanopi daemon.info connmand[611]: System hostname is nanopi
Dec 16 11:48:33 nanopi daemon.info dbus-daemon[547]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=611 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 11:48:33 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 11:48:33 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully called chroot().
Dec 16 11:48:33 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully dropped root privileges.
Dec 16 11:48:33 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Starting with address 169.254.9.102
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {update} flags 4098 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi user.notice kernel: [    7.555325] random: crng init done
Dec 16 11:48:33 nanopi user.info kernel: [    7.562399] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 11:48:33 nanopi user.info kernel: [    7.575858] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 11:48:33 nanopi user.info kernel: [    7.583454] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 11:48:33 nanopi user.warn kernel: [    7.591252] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 11:48:33 nanopi user.info kernel: [    7.601816] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 11:48:33 nanopi user.info kernel: [    7.614058] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Adding interface eth0 [ ethernet ]
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:4F:30:C5:B6:83 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 11:48:33 nanopi daemon.info connmand[611]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:48:33 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:4F:30:C5:B6:83 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:48:33 nanopi user.info kernel: [    7.623723] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {update} flags 4098 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Adding interface wifi0 [ wifi ]
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {update} flags 4099 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Ignoring interface ap0 (filtered)
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Adding interface ap0 [ wifi ]
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:4F:30:C5:B6:83 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 4099 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:4F:30:C5:B6:83 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {RX} 1 packets 60 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {TX} 0 packets 0 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 11:48:33 nanopi cron.info crond[689]: (CRON) STARTUP (1.5.5)
Dec 16 11:48:33 nanopi cron.info crond[689]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 11:48:33 nanopi cron.info crond[689]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 90% if used.)
Dec 16 11:48:33 nanopi daemon.warn connmand[611]: Skipping disconnect of carrier, network is connecting.
Dec 16 11:48:33 nanopi daemon.info dbus-daemon[547]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 11:48:33 nanopi daemon.notice wpa_supplicant[671]: Successfully initialized wpa_supplicant
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 11:48:33 nanopi daemon.info avahi-daemon[585]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 11:48:33 nanopi daemon.info connmand[611]: Setting domainname to hwhb.co.uk
Dec 16 11:48:33 nanopi daemon.info dnsmasq[563]: started, version 2.83 cachesize 150
Dec 16 11:48:33 nanopi daemon.warn dnsmasq[563]: overflow: 3 log entries lost
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:4F:30:C5:B6:83 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {update} flags 36867 <UP>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:48:33 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:48:34 nanopi user.warn wpa_supplicant[671]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 11:48:34 nanopi daemon.notice wpa_supplicant[671]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:48:34 nanopi daemon.notice wpa_supplicant[671]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:48:34 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 11:48:34 nanopi daemon.info connmand[611]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:48:34 nanopi user.info kernel: [    8.300999] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 11:48:34 nanopi daemon.info connmand[611]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:48:34 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:48:34 nanopi daemon.info avahi-daemon[585]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 11:48:34 nanopi daemon.info avahi-daemon[585]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:48:34 nanopi daemon.info connmand[611]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:48:34 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 11:48:34 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 11:48:34 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.0001
Dec 16 11:48:34 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 11:48:34 nanopi daemon.info dnsmasq[563]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 11:48:34 nanopi daemon.info dnsmasq[563]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 11:48:35 nanopi daemon.info connmand[611]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:48:36 nanopi daemon.info avahi-daemon[585]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:48:36 nanopi daemon.info connmand[611]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 11:48:36 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 11:48:36 nanopi daemon.info avahi-daemon[585]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:48:36 nanopi daemon.info avahi-daemon[585]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 11:48:37 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 11:48:39 nanopi daemon.info connmand[611]: ll-eth0 {add} address 2001:8b0:1552:697c:e84f:30ff:fec5:b683/64 label (null) family 10
Dec 16 11:48:39 nanopi user.info kernel: [   13.055376] can: controller area network core
Dec 16 11:48:39 nanopi user.info kernel: [   13.060193] NET: Registered protocol family 29
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:48:39 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 11:48:39 nanopi user.info kernel: [   13.186184] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 11:48:39 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Callout BIND, address 169.254.9.102 on interface ll-eth0
Dec 16 11:48:39 nanopi daemon.info connmand[611]: ll-eth0 {add} address 169.254.9.102/16 label ll-eth0 family 2
Dec 16 11:48:39 nanopi daemon.info connmand[611]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:48:40 nanopi user.info kernel: [   14.060372] can: raw protocol
Dec 16 11:48:41 nanopi daemon.info connmand[611]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:48:41 nanopi daemon.info connmand[611]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:48:41 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:48:41 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 11:48:41 nanopi daemon.info connmand[611]: Ignoring interface ap0 (filtered)
Dec 16 11:48:41 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 11:48:41 nanopi daemon.info avahi-daemon[585]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 11:48:41 nanopi daemon.info avahi-daemon[585]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 11:48:41 nanopi user.info kernel: [   15.235792] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 11:48:43 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 11:48:43 nanopi daemon.info avahi-daemon[585]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 11:48:43 nanopi daemon.info avahi-daemon[585]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 11:48:43 nanopi daemon.info avahi-autoipd(ll-eth0)[664]: Successfully claimed IP address 169.254.9.102
Dec 16 11:48:50 nanopi user.info kernel: [   24.341514] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:48:50 nanopi authpriv.notice login[1649]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 11:49:07 nanopi daemon.info connmand[611]: ntp: time slew +1.199864 s
Dec 16 11:50:50 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv6.connman.net/online/status.html
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 11:52:43 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 11:52:43 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Dec 16 11:52:43 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 11:52:43 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 11:52:43 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 11:52:43 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 11:52:43 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 11:52:43 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 11:52:43 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 11:52:43 nanopi user.info kernel: [    0.000212] Console: colour dummy device 80x30
Dec 16 11:52:43 nanopi user.info kernel: [    0.000280] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000302] pid_max: default: 32768 minimum: 301
Dec 16 11:52:43 nanopi user.info kernel: [    0.000438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.000454] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.001163] CPU: Testing write buffer coherency: ok
Dec 16 11:52:43 nanopi user.err kernel: [    0.001512] /cpus/cpu@0 missing clock-frequency property
Dec 16 11:52:43 nanopi user.err kernel: [    0.001538] /cpus/cpu@1 missing clock-frequency property
Dec 16 11:52:43 nanopi user.err kernel: [    0.001557] /cpus/cpu@2 missing clock-frequency property
Dec 16 11:52:43 nanopi user.err kernel: [    0.001576] /cpus/cpu@3 missing clock-frequency property
Dec 16 11:52:43 nanopi user.info kernel: [    0.001589] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 11:52:43 nanopi user.info kernel: [    0.002181] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 11:52:43 nanopi user.info kernel: [    0.002312] rcu: Hierarchical SRCU implementation.
Dec 16 11:52:43 nanopi user.info kernel: [    0.002948] smp: Bringing up secondary CPUs ...
Dec 16 11:52:43 nanopi user.info kernel: [    0.013708] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 11:52:43 nanopi user.info kernel: [    0.024532] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 11:52:43 nanopi user.info kernel: [    0.035281] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 11:52:43 nanopi user.info kernel: [    0.035378] smp: Brought up 1 node, 4 CPUs
Dec 16 11:52:43 nanopi user.info kernel: [    0.035408] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 11:52:43 nanopi user.info kernel: [    0.035417] CPU: All CPU(s) started in HYP mode.
Dec 16 11:52:43 nanopi user.info kernel: [    0.035423] CPU: Virtualization extensions available.
Dec 16 11:52:43 nanopi user.info kernel: [    0.036118] devtmpfs: initialized
Dec 16 11:52:43 nanopi user.info kernel: [    0.041407] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 11:52:43 nanopi user.info kernel: [    0.041602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 11:52:43 nanopi user.info kernel: [    0.041629] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.043909] pinctrl core: initialized pinctrl subsystem
Dec 16 11:52:43 nanopi user.info kernel: [    0.044985] NET: Registered protocol family 16
Dec 16 11:52:43 nanopi user.info kernel: [    0.046565] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 11:52:43 nanopi user.info kernel: [    0.047602] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 11:52:43 nanopi user.info kernel: [    0.047994] cpuidle: using governor menu
Dec 16 11:52:43 nanopi user.info kernel: [    0.048205] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 11:52:43 nanopi user.info kernel: [    0.048216] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 11:52:43 nanopi user.info kernel: [    0.065460] cryptd: max_cpu_qlen set to 1000
Dec 16 11:52:43 nanopi user.info kernel: [    0.066679] vdd-sys-3v3: supplied by vdd-5v
Dec 16 11:52:43 nanopi user.info kernel: [    0.067332] iommu: Default domain type: Translated 
Dec 16 11:52:43 nanopi user.info kernel: [    0.067567] usbcore: registered new interface driver usbfs
Dec 16 11:52:43 nanopi user.info kernel: [    0.067635] usbcore: registered new interface driver hub
Dec 16 11:52:43 nanopi user.info kernel: [    0.067682] usbcore: registered new device driver usb
Dec 16 11:52:43 nanopi user.info kernel: [    0.069129] clocksource: Switched to clocksource arch_sys_counter
Dec 16 11:52:43 nanopi user.info kernel: [    0.076374] NET: Registered protocol family 2
Dec 16 11:52:43 nanopi user.info kernel: [    0.076567] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077292] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077326] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077372] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077436] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077558] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077610] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:52:43 nanopi user.info kernel: [    0.077767] NET: Registered protocol family 1
Dec 16 11:52:43 nanopi user.info kernel: [    0.078965] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 11:52:43 nanopi user.notice kernel: [    0.080824] Initialise system trusted keyrings
Dec 16 11:52:43 nanopi user.info kernel: [    0.081012] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 11:52:43 nanopi user.notice kernel: [    0.085081] Key type asymmetric registered
Dec 16 11:52:43 nanopi user.notice kernel: [    0.085102] Asymmetric key parser 'x509' registered
Dec 16 11:52:43 nanopi user.err kernel: [    0.085848] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 11:52:43 nanopi user.info kernel: [    0.089586] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.091475] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.096463] Serial: 8250/16550 driver, 8 ports
Dec 16 11:52:43 nanopi user.info kernel: [    0.117271] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 11:52:43 nanopi user.info kernel: [    0.699727] printk: console [ttyS0] enabled
Dec 16 11:52:43 nanopi user.info kernel: [    0.725002] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 11:52:43 nanopi user.info kernel: [    0.754868] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 11:52:43 nanopi user.info kernel: [    0.784712] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 11:52:43 nanopi user.info kernel: [    0.795872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.802434] ehci-platform: EHCI generic platform driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.808085] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.814296] ohci-platform: OHCI generic platform driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.820694] i2c /dev entries driver
Dec 16 11:52:43 nanopi user.info kernel: [    0.824753] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 11:52:43 nanopi user.info kernel: [    0.830594] i2c i2c-0: using generic GPIOs for recovery
Dec 16 11:52:43 nanopi user.info kernel: [    0.837092] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 11:52:43 nanopi user.info kernel: [    0.845889] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 11:52:43 nanopi user.info kernel: [    0.852128] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T11:52:36 UTC (1671191556)
Dec 16 11:52:43 nanopi user.info kernel: [    0.861221] pca953x 0-0020: using no AI
Dec 16 11:52:43 nanopi user.info kernel: [    0.869456] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 11:52:43 nanopi user.info kernel: [    0.877972] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 11:52:43 nanopi user.info kernel: [    0.887878] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 11:52:43 nanopi user.info kernel: [    0.890010] NET: Registered protocol family 10
Dec 16 11:52:43 nanopi user.info kernel: [    0.897735] Segment Routing with IPv6
Dec 16 11:52:43 nanopi user.info kernel: [    0.901511] NET: Registered protocol family 17
Dec 16 11:52:43 nanopi user.notice kernel: [    0.906053] Registering SWP/SWPB emulation handler
Dec 16 11:52:43 nanopi user.info kernel: [    0.911778] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:52:43 nanopi user.info kernel: [    0.912737] registered taskstats version 1
Dec 16 11:52:43 nanopi user.info kernel: [    0.918804] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:52:43 nanopi user.notice kernel: [    0.922916] Loading compiled-in X.509 certificates
Dec 16 11:52:43 nanopi user.info kernel: [    0.944740] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 11:52:43 nanopi user.notice kernel: [    1.007055] random: fast init done
Dec 16 11:52:43 nanopi user.info kernel: [    1.007064] mmc1: new DDR MMC card at address 0001
Dec 16 11:52:43 nanopi user.info kernel: [    1.007979] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 11:52:43 nanopi user.info kernel: [    1.020349] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 11:52:43 nanopi user.info kernel: [    1.026763] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 11:52:43 nanopi user.info kernel: [    1.034280]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 11:52:43 nanopi user.info kernel: [    1.160274] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.166159] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 11:52:43 nanopi user.info kernel: [    1.174297] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 11:52:43 nanopi user.info kernel: [    1.209138] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:52:43 nanopi user.info kernel: [    1.215467] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:52:43 nanopi user.info kernel: [    1.223758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:52:43 nanopi user.info kernel: [    1.230985] usb usb1: Product: EHCI Host Controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.235859] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:52:43 nanopi user.info kernel: [    1.242133] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 11:52:43 nanopi user.info kernel: [    1.247200] hub 1-0:1.0: USB hub found
Dec 16 11:52:43 nanopi user.info kernel: [    1.251012] hub 1-0:1.0: 1 port detected
Dec 16 11:52:43 nanopi user.info kernel: [    1.255793] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.261626] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 11:52:43 nanopi user.info kernel: [    1.269607] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 11:52:43 nanopi user.info kernel: [    1.299130] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:52:43 nanopi user.info kernel: [    1.305393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:52:43 nanopi user.info kernel: [    1.313674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:52:43 nanopi user.info kernel: [    1.320900] usb usb2: Product: EHCI Host Controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.325775] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:52:43 nanopi user.info kernel: [    1.332051] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 11:52:43 nanopi user.info kernel: [    1.337038] hub 2-0:1.0: USB hub found
Dec 16 11:52:43 nanopi user.info kernel: [    1.340840] hub 2-0:1.0: 1 port detected
Dec 16 11:52:43 nanopi user.info kernel: [    1.345606] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.352456] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 11:52:43 nanopi user.info kernel: [    1.360403] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 11:52:43 nanopi user.info kernel: [    1.433294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:52:43 nanopi user.info kernel: [    1.441580] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:52:43 nanopi user.info kernel: [    1.448795] usb usb3: Product: Generic Platform OHCI controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.454724] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:52:43 nanopi user.info kernel: [    1.460995] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 11:52:43 nanopi user.info kernel: [    1.465987] hub 3-0:1.0: USB hub found
Dec 16 11:52:43 nanopi user.info kernel: [    1.469880] hub 3-0:1.0: 1 port detected
Dec 16 11:52:43 nanopi user.info kernel: [    1.474567] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.481506] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 11:52:43 nanopi user.info kernel: [    1.489524] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 11:52:43 nanopi user.info kernel: [    1.539141] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 11:52:43 nanopi user.info kernel: [    1.563359] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:52:43 nanopi user.info kernel: [    1.571646] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:52:43 nanopi user.info kernel: [    1.578853] usb usb4: Product: Generic Platform OHCI controller
Dec 16 11:52:43 nanopi user.info kernel: [    1.584780] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:52:43 nanopi user.info kernel: [    1.591053] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 11:52:43 nanopi user.info kernel: [    1.596065] hub 4-0:1.0: USB hub found
Dec 16 11:52:43 nanopi user.info kernel: [    1.599944] hub 4-0:1.0: 1 port detected
Dec 16 11:52:43 nanopi user.info kernel: [    1.608710] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 11:52:43 nanopi user.info kernel: [    1.621792] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 11:52:43 nanopi user.info kernel: [    1.629151] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 11:52:43 nanopi user.info kernel: [    1.645755] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 11:52:43 nanopi user.info kernel: [    1.651005] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:52:43 nanopi user.info kernel: [    1.659215] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 11:52:43 nanopi user.info kernel: [    1.666538] devtmpfs: mounted
Dec 16 11:52:43 nanopi user.info kernel: [    1.670912] Freeing unused kernel memory: 1024K
Dec 16 11:52:43 nanopi user.info kernel: [    1.675605] Run /sbin/init as init process
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679724]   with arguments:
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679730]     /sbin/init
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679734]     5
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679738]   with environment:
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679742]     HOME=/
Dec 16 11:52:43 nanopi user.debug kernel: [    1.679747]     TERM=linux
Dec 16 11:52:43 nanopi user.warn kernel: [    1.740024] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.750378] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.760245] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.769913] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.779505] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.789173] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.798740] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.808671] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.818252] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.827910] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.837509] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.847168] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.856753] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.866410] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 11:52:43 nanopi user.warn kernel: [    1.875978] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 11:52:43 nanopi user.info kernel: [    1.885826] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:52:43 nanopi user.info kernel: [    1.893374] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 11:52:43 nanopi user.info kernel: [    1.901604] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:52:43 nanopi user.info kernel: [    1.908757] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 11:52:43 nanopi user.info kernel: [    1.913565] usb 1-1: Manufacturer: Realtek
Dec 16 11:52:43 nanopi user.info kernel: [    1.917664] usb 1-1: SerialNumber: 00e04c000001
Dec 16 11:52:43 nanopi user.info kernel: [    1.922909] usb 1-1: skipping disabled interface 0
Dec 16 11:52:43 nanopi user.info kernel: [    1.927768] usb 1-1: skipping disabled interface 1
Dec 16 11:52:43 nanopi user.info kernel: [    2.039262] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:52:43 nanopi user.info kernel: [    2.173198] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 11:52:43 nanopi user.info kernel: [    2.181449] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:52:43 nanopi user.info kernel: [    2.188593] usb 3-1: Product: VE SLCAN Interface
Dec 16 11:52:43 nanopi user.info kernel: [    2.193242] usb 3-1: Manufacturer: Victron Energy
Dec 16 11:52:43 nanopi user.info kernel: [    2.197956] usb 3-1: SerialNumber: D307F4KH
Dec 16 11:52:43 nanopi user.info kernel: [    2.319205] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 11:52:43 nanopi user.info kernel: [    2.324278] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:52:43 nanopi user.info kernel: [    2.341337] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 11:52:43 nanopi user.info kernel: [    2.349567] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:52:43 nanopi user.info kernel: [    2.356717] usb 4-1: Product: FT232R USB UART
Dec 16 11:52:43 nanopi user.info kernel: [    2.361138] usb 4-1: Manufacturer: FTDI
Dec 16 11:52:43 nanopi user.info kernel: [    2.365011] usb 4-1: SerialNumber: AG0KG587
Dec 16 11:52:43 nanopi daemon.info kernel: [    2.480895] udevd[133]: starting version 3.2.9
Dec 16 11:52:43 nanopi user.notice kernel: [    2.497433] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:52:43 nanopi user.notice kernel: [    2.504532] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:52:43 nanopi user.notice kernel: [    2.511095] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:52:43 nanopi daemon.info kernel: [    2.541712] udevd[134]: starting eudev-3.2.9
Dec 16 11:52:43 nanopi user.warn kernel: [    2.678878] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 11:52:43 nanopi user.info kernel: [    2.682052] usbcore: registered new interface driver usbserial_generic
Dec 16 11:52:43 nanopi user.info kernel: [    2.692570] usbserial: USB Serial support registered for generic
Dec 16 11:52:43 nanopi user.info kernel: [    2.716731] usbcore: registered new interface driver ftdi_sio
Dec 16 11:52:43 nanopi user.info kernel: [    2.722895] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 11:52:43 nanopi user.info kernel: [    2.730698] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:52:43 nanopi user.info kernel: [    2.737749] usb 3-1: Detected FT-X
Dec 16 11:52:43 nanopi user.info kernel: [    2.751267] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 11:52:43 nanopi user.notice kernel: [    2.756197] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 11:52:43 nanopi user.info kernel: [    2.758829] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:52:43 nanopi user.info kernel: [    2.773430] usb 4-1: Detected FT232RL
Dec 16 11:52:43 nanopi user.info kernel: [    2.778369] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 11:52:43 nanopi user.info kernel: [    2.785044] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 11:52:43 nanopi user.info kernel: [    2.785074] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 11:52:43 nanopi user.info kernel: [    2.791585] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 11:52:43 nanopi user.notice kernel: [    2.802757] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 11:52:43 nanopi user.info kernel: [    2.805129] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 11:52:43 nanopi user.info kernel: [    2.810337] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 11:52:43 nanopi user.info kernel: [    2.810349] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 11:52:43 nanopi user.info kernel: [    2.810446] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 11:52:43 nanopi user.info kernel: [    2.810548] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 11:52:43 nanopi user.warn kernel: [    2.810582] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 11:52:43 nanopi user.info kernel: [    2.826243] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 11:52:43 nanopi user.info kernel: [    2.844968] lima 1c40000.gpu: bus rate = 200000000
Dec 16 11:52:43 nanopi user.warn kernel: [    2.850275] 8723bu: loading out-of-tree module taints kernel.
Dec 16 11:52:43 nanopi user.info kernel: [    2.853271] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 11:52:43 nanopi user.info kernel: [    2.853295] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 11:52:43 nanopi user.info kernel: [    2.853306] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 11:52:43 nanopi user.info kernel: [    2.853315] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 11:52:43 nanopi user.info kernel: [    2.853321] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 11:52:43 nanopi user.info kernel: [    2.856112] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 11:52:43 nanopi user.info kernel: [    2.860805] lima 1c40000.gpu: mod rate = 297000000
Dec 16 11:52:43 nanopi user.info kernel: [    2.866620] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 11:52:43 nanopi user.err kernel: [    2.871593] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 11:52:43 nanopi user.info kernel: [    2.878712] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 11:52:43 nanopi user.info kernel: [    2.899335] lima 1c40000.gpu: Failed to register cooling device
Dec 16 11:52:43 nanopi user.info kernel: [    2.940764] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 11:52:43 nanopi user.info kernel: [    2.957880] CAN device driver interface
Dec 16 11:52:43 nanopi user.info kernel: [    2.966909] slcan: serial line CAN interface driver
Dec 16 11:52:43 nanopi user.info kernel: [    2.972192] slcan: 10 dynamic interface channels.
Dec 16 11:52:43 nanopi user.info kernel: [    2.989643] can0: renamed from slcan0
Dec 16 11:52:43 nanopi user.info kernel: [    3.234905] usbcore: registered new interface driver rtl8723bu
Dec 16 11:52:43 nanopi user.info kernel: [    3.264769] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 11:52:43 nanopi user.info kernel: [    3.319674] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 11:52:43 nanopi user.info kernel: [    3.443066] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 11:52:43 nanopi user.warn kernel: [    4.210625] urandom_read: 4 callbacks suppressed
Dec 16 11:52:43 nanopi user.notice kernel: [    4.210638] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 11:52:43 nanopi user.notice kernel: [    4.290137] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 11:52:43 nanopi user.crit kernel: [    4.874225] watchdog: watchdog0: watchdog did not stop!
Dec 16 11:52:43 nanopi user.notice kernel: [    6.862684] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 11:52:43 nanopi user.info kernel: [    7.060495] Bluetooth: Core ver 2.22
Dec 16 11:52:43 nanopi user.info kernel: [    7.064366] NET: Registered protocol family 31
Dec 16 11:52:43 nanopi user.info kernel: [    7.068890] Bluetooth: HCI device and connection manager initialized
Dec 16 11:52:43 nanopi user.info kernel: [    7.076163] Bluetooth: HCI socket layer initialized
Dec 16 11:52:43 nanopi user.info kernel: [    7.081185] Bluetooth: L2CAP socket layer initialized
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Successfully dropped root privileges.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: avahi-daemon 0.7 starting up.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Successfully called chroot().
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Successfully dropped remaining capabilities.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Loading service file /services/garmin.service.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Loading service file /services/raymarine.service.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Network interface enumeration completed.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Server startup complete. Host name is venus.local. Local service cookie is 3402030220.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Connection Manager version 1.33
Dec 16 11:52:43 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 11:52:43 nanopi daemon.warn connmand[612]: Failed to flush table 'mangle': Invalid argument
Dec 16 11:52:43 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 11:52:43 nanopi daemon.warn connmand[612]: Failed to flush table 'nat': Invalid argument
Dec 16 11:52:43 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 11:52:43 nanopi daemon.warn connmand[612]: Failed to install iptables rules: Invalid argument
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Checking loopback interface settings
Dec 16 11:52:43 nanopi daemon.info connmand[612]: System hostname is nanopi
Dec 16 11:52:43 nanopi daemon.info dbus-daemon[549]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=612 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 11:52:43 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 11:52:43 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully called chroot().
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 11:52:43 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully dropped root privileges.
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {update} flags 4098 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Starting with address 169.254.7.27
Dec 16 11:52:43 nanopi user.info kernel: [    7.679176] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 11:52:43 nanopi user.info kernel: [    7.693409] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 11:52:43 nanopi user.info kernel: [    7.701076] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 11:52:43 nanopi user.warn kernel: [    7.708912] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Adding interface eth0 [ ethernet ]
Dec 16 11:52:43 nanopi user.info kernel: [    7.717018] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 11:52:43 nanopi user.info kernel: [    7.727836] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 11:52:43 nanopi user.info kernel: [    7.736688] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 12:64:A1:6B:15:93 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 11:52:43 nanopi daemon.info connmand[612]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:52:43 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 12:64:A1:6B:15:93 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {update} flags 4098 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Adding interface wifi0 [ wifi ]
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {update} flags 4099 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Adding interface ap0 [ wifi ]
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 12:64:A1:6B:15:93 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4099 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 12:64:A1:6B:15:93 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 11:52:43 nanopi cron.info crond[692]: (CRON) STARTUP (1.5.5)
Dec 16 11:52:43 nanopi cron.info crond[692]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 11:52:43 nanopi cron.info crond[692]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 44% if used.)
Dec 16 11:52:43 nanopi daemon.warn connmand[612]: Skipping disconnect of carrier, network is connecting.
Dec 16 11:52:43 nanopi daemon.info dbus-daemon[549]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 11:52:43 nanopi daemon.notice wpa_supplicant[672]: Successfully initialized wpa_supplicant
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 11:52:43 nanopi daemon.info avahi-daemon[586]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 11:52:43 nanopi daemon.info connmand[612]: Setting domainname to hwhb.co.uk
Dec 16 11:52:42 nanopi daemon.info dnsmasq[564]: started, version 2.83 cachesize 150
Dec 16 11:52:43 nanopi daemon.warn dnsmasq[564]: overflow: 3 log entries lost
Dec 16 11:52:43 nanopi user.notice kernel: [    7.977373] random: crng init done
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 12:64:A1:6B:15:93 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {update} flags 36867 <UP>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:52:43 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:52:43 nanopi user.warn wpa_supplicant[672]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 11:52:44 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:52:44 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:52:44 nanopi user.info kernel: [    8.426609] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 11:52:44 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 11:52:44 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 11:52:44 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 11:52:44 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00112
Dec 16 11:52:44 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 11:52:45 nanopi daemon.info connmand[612]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:52:45 nanopi daemon.info dnsmasq[564]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 11:52:45 nanopi daemon.info dnsmasq[564]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 11:52:45 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:52:45 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 11:52:45 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:52:45 nanopi daemon.info connmand[612]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:52:45 nanopi daemon.info connmand[612]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:52:48 nanopi daemon.info connmand[612]: ll-eth0 {add} address 2001:8b0:1552:697c:1064:a1ff:fe6b:1593/64 label (null) family 10
Dec 16 11:52:48 nanopi daemon.info connmand[612]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 11:52:48 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:52:48 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 11:52:48 nanopi daemon.info avahi-daemon[586]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:52:48 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 11:52:48 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 11:52:48 nanopi user.info kernel: [   13.053372] can: controller area network core
Dec 16 11:52:48 nanopi user.info kernel: [   13.057988] NET: Registered protocol family 29
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:52:49 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 11:52:49 nanopi user.info kernel: [   13.158944] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 11:52:49 nanopi user.info kernel: [   13.605222] can: raw protocol
Dec 16 11:52:49 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Callout BIND, address 169.254.7.27 on interface ll-eth0
Dec 16 11:52:49 nanopi daemon.info connmand[612]: ll-eth0 {add} address 169.254.7.27/16 label ll-eth0 family 2
Dec 16 11:52:49 nanopi daemon.info connmand[612]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:52:50 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 11:52:50 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 11:52:50 nanopi daemon.info connmand[612]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:52:50 nanopi daemon.info avahi-daemon[586]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 11:52:50 nanopi daemon.info connmand[612]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:52:50 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:52:50 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 11:52:50 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 11:52:50 nanopi user.info kernel: [   15.026555] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 11:52:52 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 11:52:52 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 11:52:52 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 11:52:53 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully claimed IP address 169.254.7.27
Dec 16 11:53:00 nanopi user.info kernel: [   24.494173] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:53:00 nanopi authpriv.notice login[1666]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 11:53:19 nanopi daemon.info connmand[612]: ntp: time slew -0.114120 s
Dec 16 11:53:53 nanopi daemon.warn connmand[612]: Online check failed for 0x4ec390 Wired
Dec 16 11:53:53 nanopi daemon.info connmand[612]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:55:03 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 11:57:15 nanopi daemon.warn connmand[612]: Online check failed for 0x4ec390 Wired
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 11:57:51 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 11:57:51 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Dec 16 11:57:51 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 11:57:51 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 11:57:51 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 11:57:51 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 11:57:51 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 11:57:51 nanopi user.info kernel: [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 11:57:51 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 11:57:51 nanopi user.info kernel: [    0.000213] Console: colour dummy device 80x30
Dec 16 11:57:51 nanopi user.info kernel: [    0.000284] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000306] pid_max: default: 32768 minimum: 301
Dec 16 11:57:51 nanopi user.info kernel: [    0.000443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.000459] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.001167] CPU: Testing write buffer coherency: ok
Dec 16 11:57:51 nanopi user.err kernel: [    0.001510] /cpus/cpu@0 missing clock-frequency property
Dec 16 11:57:51 nanopi user.err kernel: [    0.001536] /cpus/cpu@1 missing clock-frequency property
Dec 16 11:57:51 nanopi user.err kernel: [    0.001555] /cpus/cpu@2 missing clock-frequency property
Dec 16 11:57:51 nanopi user.err kernel: [    0.001575] /cpus/cpu@3 missing clock-frequency property
Dec 16 11:57:51 nanopi user.info kernel: [    0.001588] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 11:57:51 nanopi user.info kernel: [    0.002180] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 11:57:51 nanopi user.info kernel: [    0.002303] rcu: Hierarchical SRCU implementation.
Dec 16 11:57:51 nanopi user.info kernel: [    0.002942] smp: Bringing up secondary CPUs ...
Dec 16 11:57:51 nanopi user.info kernel: [    0.013699] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 11:57:51 nanopi user.info kernel: [    0.024515] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 11:57:51 nanopi user.info kernel: [    0.035269] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 11:57:51 nanopi user.info kernel: [    0.035363] smp: Brought up 1 node, 4 CPUs
Dec 16 11:57:51 nanopi user.info kernel: [    0.035393] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 11:57:51 nanopi user.info kernel: [    0.035401] CPU: All CPU(s) started in HYP mode.
Dec 16 11:57:51 nanopi user.info kernel: [    0.035407] CPU: Virtualization extensions available.
Dec 16 11:57:51 nanopi user.info kernel: [    0.036099] devtmpfs: initialized
Dec 16 11:57:51 nanopi user.info kernel: [    0.041388] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 11:57:51 nanopi user.info kernel: [    0.041582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 11:57:51 nanopi user.info kernel: [    0.041611] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.043888] pinctrl core: initialized pinctrl subsystem
Dec 16 11:57:51 nanopi user.info kernel: [    0.044954] NET: Registered protocol family 16
Dec 16 11:57:51 nanopi user.info kernel: [    0.046524] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 11:57:51 nanopi user.info kernel: [    0.047549] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 11:57:51 nanopi user.info kernel: [    0.047942] cpuidle: using governor menu
Dec 16 11:57:51 nanopi user.info kernel: [    0.048154] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 11:57:51 nanopi user.info kernel: [    0.048165] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 11:57:51 nanopi user.info kernel: [    0.065386] cryptd: max_cpu_qlen set to 1000
Dec 16 11:57:51 nanopi user.info kernel: [    0.066611] vdd-sys-3v3: supplied by vdd-5v
Dec 16 11:57:51 nanopi user.info kernel: [    0.067268] iommu: Default domain type: Translated 
Dec 16 11:57:51 nanopi user.info kernel: [    0.067509] usbcore: registered new interface driver usbfs
Dec 16 11:57:51 nanopi user.info kernel: [    0.067574] usbcore: registered new interface driver hub
Dec 16 11:57:51 nanopi user.info kernel: [    0.067621] usbcore: registered new device driver usb
Dec 16 11:57:51 nanopi user.info kernel: [    0.069079] clocksource: Switched to clocksource arch_sys_counter
Dec 16 11:57:51 nanopi user.info kernel: [    0.076473] NET: Registered protocol family 2
Dec 16 11:57:51 nanopi user.info kernel: [    0.076667] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077398] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077432] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077478] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077542] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077667] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077719] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 11:57:51 nanopi user.info kernel: [    0.077885] NET: Registered protocol family 1
Dec 16 11:57:51 nanopi user.info kernel: [    0.079259] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 11:57:51 nanopi user.notice kernel: [    0.080970] Initialise system trusted keyrings
Dec 16 11:57:51 nanopi user.info kernel: [    0.081156] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 11:57:51 nanopi user.notice kernel: [    0.085202] Key type asymmetric registered
Dec 16 11:57:51 nanopi user.notice kernel: [    0.085221] Asymmetric key parser 'x509' registered
Dec 16 11:57:51 nanopi user.err kernel: [    0.085951] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 11:57:51 nanopi user.info kernel: [    0.089658] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.091537] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.096408] Serial: 8250/16550 driver, 8 ports
Dec 16 11:57:51 nanopi user.info kernel: [    0.117229] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 11:57:51 nanopi user.info kernel: [    0.699723] printk: console [ttyS0] enabled
Dec 16 11:57:51 nanopi user.info kernel: [    0.724998] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 11:57:51 nanopi user.info kernel: [    0.754838] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 11:57:51 nanopi user.info kernel: [    0.784617] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 11:57:51 nanopi user.info kernel: [    0.795713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.802274] ehci-platform: EHCI generic platform driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.807937] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.814159] ohci-platform: OHCI generic platform driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.820570] i2c /dev entries driver
Dec 16 11:57:51 nanopi user.info kernel: [    0.824665] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 11:57:51 nanopi user.info kernel: [    0.830513] i2c i2c-0: using generic GPIOs for recovery
Dec 16 11:57:51 nanopi user.info kernel: [    0.836973] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 11:57:51 nanopi user.info kernel: [    0.845761] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 11:57:51 nanopi user.info kernel: [    0.852008] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T11:57:45 UTC (1671191865)
Dec 16 11:57:51 nanopi user.info kernel: [    0.861119] pca953x 0-0020: using no AI
Dec 16 11:57:51 nanopi user.info kernel: [    0.869330] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 11:57:51 nanopi user.info kernel: [    0.877814] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 11:57:51 nanopi user.info kernel: [    0.887789] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 11:57:51 nanopi user.info kernel: [    0.889828] NET: Registered protocol family 10
Dec 16 11:57:51 nanopi user.info kernel: [    0.897640] Segment Routing with IPv6
Dec 16 11:57:51 nanopi user.info kernel: [    0.901438] NET: Registered protocol family 17
Dec 16 11:57:51 nanopi user.notice kernel: [    0.905984] Registering SWP/SWPB emulation handler
Dec 16 11:57:51 nanopi user.info kernel: [    0.912687] registered taskstats version 1
Dec 16 11:57:51 nanopi user.info kernel: [    0.913065] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:57:51 nanopi user.notice kernel: [    0.916801] Loading compiled-in X.509 certificates
Dec 16 11:57:51 nanopi user.info kernel: [    0.923798] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 11:57:51 nanopi user.info kernel: [    0.945439] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 11:57:51 nanopi user.notice kernel: [    0.993880] random: fast init done
Dec 16 11:57:51 nanopi user.info kernel: [    0.997344] mmc1: new DDR MMC card at address 0001
Dec 16 11:57:51 nanopi user.info kernel: [    1.003093] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 11:57:51 nanopi user.info kernel: [    1.008126] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 11:57:51 nanopi user.info kernel: [    1.014625] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 11:57:51 nanopi user.info kernel: [    1.021931]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 11:57:51 nanopi user.info kernel: [    1.159968] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.165860] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 11:57:51 nanopi user.info kernel: [    1.174052] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 11:57:51 nanopi user.info kernel: [    1.209094] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:57:51 nanopi user.info kernel: [    1.215406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:57:51 nanopi user.info kernel: [    1.223692] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:57:51 nanopi user.info kernel: [    1.230920] usb usb1: Product: EHCI Host Controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.235795] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:57:51 nanopi user.info kernel: [    1.242069] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 11:57:51 nanopi user.info kernel: [    1.247113] hub 1-0:1.0: USB hub found
Dec 16 11:57:51 nanopi user.info kernel: [    1.250938] hub 1-0:1.0: 1 port detected
Dec 16 11:57:51 nanopi user.info kernel: [    1.255727] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.261612] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 11:57:51 nanopi user.info kernel: [    1.269596] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 11:57:51 nanopi user.info kernel: [    1.299084] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 11:57:51 nanopi user.info kernel: [    1.305353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 11:57:51 nanopi user.info kernel: [    1.313637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:57:51 nanopi user.info kernel: [    1.320871] usb usb2: Product: EHCI Host Controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.325747] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 11:57:51 nanopi user.info kernel: [    1.332023] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 11:57:51 nanopi user.info kernel: [    1.337006] hub 2-0:1.0: USB hub found
Dec 16 11:57:51 nanopi user.info kernel: [    1.340819] hub 2-0:1.0: 1 port detected
Dec 16 11:57:51 nanopi user.info kernel: [    1.345558] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.352444] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 11:57:51 nanopi user.info kernel: [    1.360416] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 11:57:51 nanopi user.info kernel: [    1.433255] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:57:51 nanopi user.info kernel: [    1.441541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:57:51 nanopi user.info kernel: [    1.448757] usb usb3: Product: Generic Platform OHCI controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.454685] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:57:51 nanopi user.info kernel: [    1.460955] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 11:57:51 nanopi user.info kernel: [    1.465928] hub 3-0:1.0: USB hub found
Dec 16 11:57:51 nanopi user.info kernel: [    1.469834] hub 3-0:1.0: 1 port detected
Dec 16 11:57:51 nanopi user.info kernel: [    1.474540] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.481550] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 11:57:51 nanopi user.info kernel: [    1.489594] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 11:57:51 nanopi user.info kernel: [    1.539092] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 11:57:51 nanopi user.info kernel: [    1.563302] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 11:57:51 nanopi user.info kernel: [    1.571580] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 11:57:51 nanopi user.info kernel: [    1.578794] usb usb4: Product: Generic Platform OHCI controller
Dec 16 11:57:51 nanopi user.info kernel: [    1.584721] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 11:57:51 nanopi user.info kernel: [    1.590994] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 11:57:51 nanopi user.info kernel: [    1.596001] hub 4-0:1.0: USB hub found
Dec 16 11:57:51 nanopi user.info kernel: [    1.599889] hub 4-0:1.0: 1 port detected
Dec 16 11:57:51 nanopi user.info kernel: [    1.608550] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 11:57:51 nanopi user.info kernel: [    1.621681] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 11:57:51 nanopi user.info kernel: [    1.629000] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 11:57:51 nanopi user.info kernel: [    1.645805] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 11:57:51 nanopi user.info kernel: [    1.651099] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:57:51 nanopi user.info kernel: [    1.659307] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 11:57:51 nanopi user.info kernel: [    1.666706] devtmpfs: mounted
Dec 16 11:57:51 nanopi user.info kernel: [    1.671095] Freeing unused kernel memory: 1024K
Dec 16 11:57:51 nanopi user.info kernel: [    1.675779] Run /sbin/init as init process
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679894]   with arguments:
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679900]     /sbin/init
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679904]     5
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679908]   with environment:
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679913]     HOME=/
Dec 16 11:57:51 nanopi user.debug kernel: [    1.679916]     TERM=linux
Dec 16 11:57:51 nanopi user.warn kernel: [    1.739897] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.750306] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.760191] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.769856] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.779437] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.789096] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.798661] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.798673] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.817910] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.827820] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.837391] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.847051] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.856620] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.866323] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 11:57:51 nanopi user.warn kernel: [    1.875904] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 11:57:51 nanopi user.info kernel: [    1.885780] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:57:51 nanopi user.info kernel: [    1.893521] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 11:57:51 nanopi user.info kernel: [    1.901761] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:57:51 nanopi user.info kernel: [    1.908910] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 11:57:51 nanopi user.info kernel: [    1.913787] usb 1-1: Manufacturer: Realtek
Dec 16 11:57:51 nanopi user.info kernel: [    1.917910] usb 1-1: SerialNumber: 00e04c000001
Dec 16 11:57:51 nanopi user.info kernel: [    1.923169] usb 1-1: skipping disabled interface 0
Dec 16 11:57:51 nanopi user.info kernel: [    1.927997] usb 1-1: skipping disabled interface 1
Dec 16 11:57:51 nanopi user.info kernel: [    2.039164] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 11:57:51 nanopi user.info kernel: [    2.183185] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 11:57:51 nanopi user.info kernel: [    2.191472] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:57:51 nanopi user.info kernel: [    2.198620] usb 3-1: Product: VE SLCAN Interface
Dec 16 11:57:51 nanopi user.info kernel: [    2.203256] usb 3-1: Manufacturer: Victron Energy
Dec 16 11:57:51 nanopi user.info kernel: [    2.207962] usb 3-1: SerialNumber: D307F4KH
Dec 16 11:57:51 nanopi user.info kernel: [    2.212657] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 11:57:51 nanopi user.info kernel: [    2.217718] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:57:51 nanopi user.info kernel: [    2.321285] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 11:57:51 nanopi user.info kernel: [    2.329556] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 11:57:51 nanopi user.info kernel: [    2.336711] usb 4-1: Product: FT232R USB UART
Dec 16 11:57:51 nanopi user.info kernel: [    2.341118] usb 4-1: Manufacturer: FTDI
Dec 16 11:57:51 nanopi user.info kernel: [    2.344989] usb 4-1: SerialNumber: AG0KG587
Dec 16 11:57:51 nanopi daemon.info kernel: [    2.360007] udevd[130]: starting version 3.2.9
Dec 16 11:57:51 nanopi user.notice kernel: [    2.376510] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:57:51 nanopi user.notice kernel: [    2.383565] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:57:51 nanopi user.notice kernel: [    2.390119] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 11:57:51 nanopi daemon.info kernel: [    2.419936] udevd[131]: starting eudev-3.2.9
Dec 16 11:57:51 nanopi user.info kernel: [    2.559024] usbcore: registered new interface driver usbserial_generic
Dec 16 11:57:51 nanopi user.info kernel: [    2.566047] usbserial: USB Serial support registered for generic
Dec 16 11:57:51 nanopi user.warn kernel: [    2.576803] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 11:57:51 nanopi user.notice kernel: [    2.580711] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 11:57:51 nanopi user.info kernel: [    2.592071] usbcore: registered new interface driver ftdi_sio
Dec 16 11:57:51 nanopi user.info kernel: [    2.598098] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 11:57:51 nanopi user.info kernel: [    2.613136] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:57:51 nanopi user.info kernel: [    2.620340] usb 3-1: Detected FT-X
Dec 16 11:57:51 nanopi user.notice kernel: [    2.630023] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 11:57:51 nanopi user.info kernel: [    2.631058] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 11:57:51 nanopi user.info kernel: [    2.654258] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 11:57:51 nanopi user.info kernel: [    2.661435] usb 4-1: Detected FT232RL
Dec 16 11:57:51 nanopi user.warn kernel: [    2.671180] 8723bu: loading out-of-tree module taints kernel.
Dec 16 11:57:51 nanopi user.info kernel: [    2.673371] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 11:57:51 nanopi user.info kernel: [    2.683586] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 11:57:51 nanopi user.info kernel: [    2.690220] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 11:57:51 nanopi user.info kernel: [    2.696989] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 11:57:51 nanopi user.info kernel: [    2.706300] lima 1c40000.gpu: bus rate = 200000000
Dec 16 11:57:51 nanopi user.info kernel: [    2.706938] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 11:57:51 nanopi user.info kernel: [    2.711368] lima 1c40000.gpu: mod rate = 297000000
Dec 16 11:57:51 nanopi user.err kernel: [    2.723566] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 11:57:51 nanopi user.info kernel: [    2.731007] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 11:57:51 nanopi user.info kernel: [    2.738007] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 11:57:51 nanopi user.info kernel: [    2.744432] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 11:57:51 nanopi user.info kernel: [    2.745586] lima 1c40000.gpu: Failed to register cooling device
Dec 16 11:57:51 nanopi user.info kernel: [    2.750306] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 11:57:51 nanopi user.info kernel: [    2.757055] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 11:57:51 nanopi user.warn kernel: [    2.761956] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 11:57:51 nanopi user.info kernel: [    2.779051] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 11:57:51 nanopi user.info kernel: [    2.786462] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 11:57:51 nanopi user.info kernel: [    2.793908] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 11:57:51 nanopi user.info kernel: [    2.798940] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 11:57:51 nanopi user.info kernel: [    2.805927] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 11:57:51 nanopi user.info kernel: [    2.811719] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 11:57:51 nanopi user.info kernel: [    2.827375] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 11:57:51 nanopi user.info kernel: [    2.834642] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 11:57:51 nanopi user.info kernel: [    2.841266] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 11:57:51 nanopi user.info kernel: [    2.851346] CAN device driver interface
Dec 16 11:57:51 nanopi user.info kernel: [    2.864406] slcan: serial line CAN interface driver
Dec 16 11:57:51 nanopi user.info kernel: [    2.869435] slcan: 10 dynamic interface channels.
Dec 16 11:57:51 nanopi user.info kernel: [    2.878529] can0: renamed from slcan0
Dec 16 11:57:51 nanopi user.info kernel: [    3.047558] usbcore: registered new interface driver rtl8723bu
Dec 16 11:57:51 nanopi user.info kernel: [    3.085841] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 11:57:51 nanopi user.info kernel: [    3.169567] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 11:57:51 nanopi user.info kernel: [    3.312349] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 11:57:51 nanopi user.warn kernel: [    4.082091] urandom_read: 4 callbacks suppressed
Dec 16 11:57:51 nanopi user.notice kernel: [    4.082147] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 11:57:51 nanopi user.notice kernel: [    4.161692] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 11:57:51 nanopi user.crit kernel: [    4.746856] watchdog: watchdog0: watchdog did not stop!
Dec 16 11:57:51 nanopi user.notice kernel: [    6.731563] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 11:57:51 nanopi user.info kernel: [    6.931481] Bluetooth: Core ver 2.22
Dec 16 11:57:51 nanopi user.info kernel: [    6.935291] NET: Registered protocol family 31
Dec 16 11:57:51 nanopi user.info kernel: [    6.939856] Bluetooth: HCI device and connection manager initialized
Dec 16 11:57:51 nanopi user.info kernel: [    6.946251] Bluetooth: HCI socket layer initialized
Dec 16 11:57:51 nanopi user.info kernel: [    6.951206] Bluetooth: L2CAP socket layer initialized
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Successfully dropped root privileges.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: avahi-daemon 0.7 starting up.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Successfully called chroot().
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Successfully dropped remaining capabilities.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Loading service file /services/garmin.service.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Loading service file /services/raymarine.service.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Network interface enumeration completed.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Server startup complete. Host name is venus.local. Local service cookie is 2237173820.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Connection Manager version 1.33
Dec 16 11:57:51 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 11:57:51 nanopi daemon.warn connmand[609]: Failed to flush table 'mangle': Invalid argument
Dec 16 11:57:51 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 11:57:51 nanopi daemon.warn connmand[609]: Failed to flush table 'nat': Invalid argument
Dec 16 11:57:51 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 11:57:51 nanopi daemon.warn connmand[609]: Failed to install iptables rules: Invalid argument
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Checking loopback interface settings
Dec 16 11:57:51 nanopi daemon.info connmand[609]: System hostname is nanopi
Dec 16 11:57:51 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 11:57:51 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully called chroot().
Dec 16 11:57:51 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully dropped root privileges.
Dec 16 11:57:51 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Starting with address 169.254.8.160
Dec 16 11:57:51 nanopi daemon.info dbus-daemon[545]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=609 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {update} flags 4098 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi user.info kernel: [    7.572656] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 11:57:51 nanopi user.info kernel: [    7.587498] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 11:57:51 nanopi user.info kernel: [    7.595082] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 11:57:51 nanopi user.warn kernel: [    7.602981] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 11:57:51 nanopi user.info kernel: [    7.612915] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Adding interface eth0 [ ethernet ]
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address BA:2B:F4:0F:FF:47 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address BA:2B:F4:0F:FF:47 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 11:57:51 nanopi daemon.info connmand[609]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:57:51 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {update} flags 4098 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Adding interface wifi0 [ wifi ]
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {update} flags 4099 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Ignoring interface ap0 (filtered)
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Adding interface ap0 [ wifi ]
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address BA:2B:F4:0F:FF:47 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {TX} 2 packets 176 bytes
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 4099 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address BA:2B:F4:0F:FF:47 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 11:57:51 nanopi user.info kernel: [    7.623061] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 11:57:51 nanopi user.info kernel: [    7.631747] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 11:57:51 nanopi daemon.warn connmand[609]: Skipping disconnect of carrier, network is connecting.
Dec 16 11:57:51 nanopi cron.info crond[689]: (CRON) STARTUP (1.5.5)
Dec 16 11:57:51 nanopi cron.info crond[689]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 11:57:51 nanopi user.notice kernel: [    7.676032] random: crng init done
Dec 16 11:57:51 nanopi cron.info crond[689]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 5% if used.)
Dec 16 11:57:51 nanopi daemon.info dbus-daemon[545]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 11:57:51 nanopi daemon.notice wpa_supplicant[669]: Successfully initialized wpa_supplicant
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 11:57:51 nanopi daemon.info avahi-daemon[583]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 11:57:51 nanopi daemon.info connmand[609]: Setting domainname to hwhb.co.uk
Dec 16 11:57:51 nanopi daemon.info dnsmasq[561]: started, version 2.83 cachesize 150
Dec 16 11:57:51 nanopi daemon.warn dnsmasq[561]: overflow: 3 log entries lost
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {TX} 2 packets 176 bytes
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address BA:2B:F4:0F:FF:47 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {update} flags 36867 <UP>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 11:57:51 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 11:57:51 nanopi user.warn wpa_supplicant[669]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 11:57:51 nanopi daemon.notice wpa_supplicant[669]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:57:52 nanopi daemon.notice wpa_supplicant[669]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 11:57:52 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 11:57:52 nanopi daemon.info connmand[609]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:57:52 nanopi user.info kernel: [    8.287138] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 11:57:52 nanopi daemon.info connmand[609]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:57:52 nanopi daemon.info connmand[609]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 11:57:52 nanopi daemon.info dnsmasq[561]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 11:57:52 nanopi daemon.info dnsmasq[561]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 11:57:53 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 11:57:53 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 11:57:53 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00107
Dec 16 11:57:53 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 11:57:53 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:57:53 nanopi daemon.info avahi-daemon[583]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 11:57:53 nanopi daemon.info avahi-daemon[583]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:57:53 nanopi daemon.info connmand[609]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 11:57:54 nanopi daemon.info connmand[609]: ll-eth0 {add} address 2001:8b0:1552:697c:b82b:f4ff:fe0f:ff47/64 label (null) family 10
Dec 16 11:57:54 nanopi daemon.info connmand[609]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 11:57:54 nanopi daemon.info avahi-daemon[583]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 11:57:54 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 11:57:54 nanopi daemon.info avahi-daemon[583]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 11:57:54 nanopi daemon.info avahi-daemon[583]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 11:57:55 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 11:57:57 nanopi user.info kernel: [   13.012998] can: controller area network core
Dec 16 11:57:57 nanopi user.info kernel: [   13.017636] NET: Registered protocol family 29
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 11:57:57 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 11:57:57 nanopi user.info kernel: [   13.116400] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 11:57:57 nanopi user.info kernel: [   13.729642] can: raw protocol
Dec 16 11:57:57 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Callout BIND, address 169.254.8.160 on interface ll-eth0
Dec 16 11:57:57 nanopi daemon.info connmand[609]: ll-eth0 {add} address 169.254.8.160/16 label ll-eth0 family 2
Dec 16 11:57:57 nanopi daemon.info connmand[609]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 11:57:59 nanopi daemon.info connmand[609]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 11:57:59 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 11:57:59 nanopi daemon.info avahi-daemon[583]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 11:57:59 nanopi daemon.info connmand[609]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 11:57:59 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 11:57:59 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 11:57:59 nanopi daemon.info avahi-daemon[583]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 11:57:59 nanopi daemon.info connmand[609]: Ignoring interface ap0 (filtered)
Dec 16 11:57:59 nanopi user.info kernel: [   14.980177] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 11:58:00 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 11:58:00 nanopi daemon.info avahi-daemon[583]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 11:58:00 nanopi daemon.info avahi-daemon[583]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 11:58:01 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully claimed IP address 169.254.8.160
Dec 16 11:58:08 nanopi user.info kernel: [   24.391157] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 11:58:08 nanopi authpriv.notice login[1652]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 11:58:25 nanopi daemon.info connmand[609]: ntp: time slew +0.471371 s
Dec 16 12:00:07 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv6.connman.net/online/status.html
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 12:00:25 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 12:00:25 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Dec 16 12:00:25 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 12:00:25 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 12:00:25 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 12:00:25 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 12:00:25 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 12:00:25 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 12:00:25 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 12:00:25 nanopi user.info kernel: [    0.000212] Console: colour dummy device 80x30
Dec 16 12:00:25 nanopi user.info kernel: [    0.000279] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000302] pid_max: default: 32768 minimum: 301
Dec 16 12:00:25 nanopi user.info kernel: [    0.000441] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.000458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.001166] CPU: Testing write buffer coherency: ok
Dec 16 12:00:25 nanopi user.err kernel: [    0.001508] /cpus/cpu@0 missing clock-frequency property
Dec 16 12:00:25 nanopi user.err kernel: [    0.001535] /cpus/cpu@1 missing clock-frequency property
Dec 16 12:00:25 nanopi user.err kernel: [    0.001555] /cpus/cpu@2 missing clock-frequency property
Dec 16 12:00:25 nanopi user.err kernel: [    0.001574] /cpus/cpu@3 missing clock-frequency property
Dec 16 12:00:25 nanopi user.info kernel: [    0.001587] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 12:00:25 nanopi user.info kernel: [    0.002168] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 12:00:25 nanopi user.info kernel: [    0.002292] rcu: Hierarchical SRCU implementation.
Dec 16 12:00:25 nanopi user.info kernel: [    0.002924] smp: Bringing up secondary CPUs ...
Dec 16 12:00:25 nanopi user.info kernel: [    0.013679] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 12:00:25 nanopi user.info kernel: [    0.024491] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 12:00:25 nanopi user.info kernel: [    0.035256] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 12:00:25 nanopi user.info kernel: [    0.035355] smp: Brought up 1 node, 4 CPUs
Dec 16 12:00:25 nanopi user.info kernel: [    0.035385] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 12:00:25 nanopi user.info kernel: [    0.035393] CPU: All CPU(s) started in HYP mode.
Dec 16 12:00:25 nanopi user.info kernel: [    0.035400] CPU: Virtualization extensions available.
Dec 16 12:00:25 nanopi user.info kernel: [    0.036090] devtmpfs: initialized
Dec 16 12:00:25 nanopi user.info kernel: [    0.041370] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 12:00:25 nanopi user.info kernel: [    0.041569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 12:00:25 nanopi user.info kernel: [    0.041597] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.043874] pinctrl core: initialized pinctrl subsystem
Dec 16 12:00:25 nanopi user.info kernel: [    0.044944] NET: Registered protocol family 16
Dec 16 12:00:25 nanopi user.info kernel: [    0.046518] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 12:00:25 nanopi user.info kernel: [    0.047562] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 12:00:25 nanopi user.info kernel: [    0.047963] cpuidle: using governor menu
Dec 16 12:00:25 nanopi user.info kernel: [    0.048171] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 12:00:25 nanopi user.info kernel: [    0.048182] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 12:00:25 nanopi user.info kernel: [    0.065462] cryptd: max_cpu_qlen set to 1000
Dec 16 12:00:25 nanopi user.info kernel: [    0.066672] vdd-sys-3v3: supplied by vdd-5v
Dec 16 12:00:25 nanopi user.info kernel: [    0.067333] iommu: Default domain type: Translated 
Dec 16 12:00:25 nanopi user.info kernel: [    0.067570] usbcore: registered new interface driver usbfs
Dec 16 12:00:25 nanopi user.info kernel: [    0.067638] usbcore: registered new interface driver hub
Dec 16 12:00:25 nanopi user.info kernel: [    0.067685] usbcore: registered new device driver usb
Dec 16 12:00:25 nanopi user.info kernel: [    0.069176] clocksource: Switched to clocksource arch_sys_counter
Dec 16 12:00:25 nanopi user.info kernel: [    0.076488] NET: Registered protocol family 2
Dec 16 12:00:25 nanopi user.info kernel: [    0.076688] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077414] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077443] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077489] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077554] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077690] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077741] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 12:00:25 nanopi user.info kernel: [    0.077913] NET: Registered protocol family 1
Dec 16 12:00:25 nanopi user.info kernel: [    0.079276] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 12:00:25 nanopi user.notice kernel: [    0.080958] Initialise system trusted keyrings
Dec 16 12:00:25 nanopi user.info kernel: [    0.081135] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 12:00:25 nanopi user.notice kernel: [    0.085208] Key type asymmetric registered
Dec 16 12:00:25 nanopi user.notice kernel: [    0.085230] Asymmetric key parser 'x509' registered
Dec 16 12:00:25 nanopi user.err kernel: [    0.085964] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 12:00:25 nanopi user.info kernel: [    0.089688] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.091558] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.096567] Serial: 8250/16550 driver, 8 ports
Dec 16 12:00:25 nanopi user.info kernel: [    0.117497] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 12:00:25 nanopi user.info kernel: [    0.699933] printk: console [ttyS0] enabled
Dec 16 12:00:25 nanopi user.info kernel: [    0.725207] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 12:00:25 nanopi user.info kernel: [    0.755068] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 12:00:25 nanopi user.info kernel: [    0.784937] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 12:00:25 nanopi user.info kernel: [    0.795994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.802565] ehci-platform: EHCI generic platform driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.808207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.814420] ohci-platform: OHCI generic platform driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.820818] i2c /dev entries driver
Dec 16 12:00:25 nanopi user.info kernel: [    0.824881] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 12:00:25 nanopi user.info kernel: [    0.830728] i2c i2c-0: using generic GPIOs for recovery
Dec 16 12:00:25 nanopi user.info kernel: [    0.837189] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 12:00:25 nanopi user.info kernel: [    0.845990] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 12:00:25 nanopi user.info kernel: [    0.852231] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T12:00:19 UTC (1671192019)
Dec 16 12:00:25 nanopi user.info kernel: [    0.861306] pca953x 0-0020: using no AI
Dec 16 12:00:25 nanopi user.info kernel: [    0.869579] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 12:00:25 nanopi user.info kernel: [    0.878073] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 12:00:25 nanopi user.info kernel: [    0.887946] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 12:00:25 nanopi user.info kernel: [    0.890090] NET: Registered protocol family 10
Dec 16 12:00:25 nanopi user.info kernel: [    0.897765] Segment Routing with IPv6
Dec 16 12:00:25 nanopi user.info kernel: [    0.901544] NET: Registered protocol family 17
Dec 16 12:00:25 nanopi user.notice kernel: [    0.906088] Registering SWP/SWPB emulation handler
Dec 16 12:00:25 nanopi user.info kernel: [    0.912724] registered taskstats version 1
Dec 16 12:00:25 nanopi user.info kernel: [    0.913231] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 12:00:25 nanopi user.notice kernel: [    0.916837] Loading compiled-in X.509 certificates
Dec 16 12:00:25 nanopi user.info kernel: [    0.917709] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 12:00:25 nanopi user.info kernel: [    0.945458] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 12:00:25 nanopi user.notice kernel: [    0.993989] random: fast init done
Dec 16 12:00:25 nanopi user.info kernel: [    0.997534] mmc1: new DDR MMC card at address 0001
Dec 16 12:00:25 nanopi user.info kernel: [    1.003267] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 12:00:25 nanopi user.info kernel: [    1.008281] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 12:00:25 nanopi user.info kernel: [    1.014846] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 12:00:25 nanopi user.info kernel: [    1.022364]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 12:00:25 nanopi user.info kernel: [    1.170082] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.175942] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 12:00:25 nanopi user.info kernel: [    1.184082] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 12:00:25 nanopi user.info kernel: [    1.219195] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 12:00:25 nanopi user.info kernel: [    1.225536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 12:00:25 nanopi user.info kernel: [    1.233829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:00:25 nanopi user.info kernel: [    1.241055] usb usb1: Product: EHCI Host Controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.245930] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 12:00:25 nanopi user.info kernel: [    1.252203] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 12:00:25 nanopi user.info kernel: [    1.257282] hub 1-0:1.0: USB hub found
Dec 16 12:00:25 nanopi user.info kernel: [    1.261106] hub 1-0:1.0: 1 port detected
Dec 16 12:00:25 nanopi user.info kernel: [    1.265879] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.271681] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 12:00:25 nanopi user.info kernel: [    1.279673] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 12:00:25 nanopi user.info kernel: [    1.309181] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 12:00:25 nanopi user.info kernel: [    1.315448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 12:00:25 nanopi user.info kernel: [    1.323730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:00:25 nanopi user.info kernel: [    1.330955] usb usb2: Product: EHCI Host Controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.335830] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 12:00:25 nanopi user.info kernel: [    1.342106] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 12:00:25 nanopi user.info kernel: [    1.347100] hub 2-0:1.0: USB hub found
Dec 16 12:00:25 nanopi user.info kernel: [    1.350904] hub 2-0:1.0: 1 port detected
Dec 16 12:00:25 nanopi user.info kernel: [    1.355652] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.362510] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 12:00:25 nanopi user.info kernel: [    1.370500] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 12:00:25 nanopi user.info kernel: [    1.443347] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 12:00:25 nanopi user.info kernel: [    1.451632] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:00:25 nanopi user.info kernel: [    1.458846] usb usb3: Product: Generic Platform OHCI controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.464775] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 12:00:25 nanopi user.info kernel: [    1.471045] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 12:00:25 nanopi user.info kernel: [    1.476048] hub 3-0:1.0: USB hub found
Dec 16 12:00:25 nanopi user.info kernel: [    1.479930] hub 3-0:1.0: 1 port detected
Dec 16 12:00:25 nanopi user.info kernel: [    1.484629] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.491569] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 12:00:25 nanopi user.info kernel: [    1.499584] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 12:00:25 nanopi user.info kernel: [    1.549197] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 12:00:25 nanopi user.info kernel: [    1.573396] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 12:00:25 nanopi user.info kernel: [    1.581696] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:00:25 nanopi user.info kernel: [    1.588911] usb usb4: Product: Generic Platform OHCI controller
Dec 16 12:00:25 nanopi user.info kernel: [    1.594847] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 12:00:25 nanopi user.info kernel: [    1.601119] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 12:00:25 nanopi user.info kernel: [    1.606117] hub 4-0:1.0: USB hub found
Dec 16 12:00:25 nanopi user.info kernel: [    1.610000] hub 4-0:1.0: 1 port detected
Dec 16 12:00:25 nanopi user.info kernel: [    1.618680] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 12:00:25 nanopi user.info kernel: [    1.631761] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 12:00:25 nanopi user.info kernel: [    1.639079] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 12:00:25 nanopi user.info kernel: [    1.655147] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 12:00:25 nanopi user.info kernel: [    1.660418] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:00:25 nanopi user.info kernel: [    1.668585] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 12:00:25 nanopi user.info kernel: [    1.676019] devtmpfs: mounted
Dec 16 12:00:25 nanopi user.info kernel: [    1.680387] Freeing unused kernel memory: 1024K
Dec 16 12:00:25 nanopi user.info kernel: [    1.719342] Run /sbin/init as init process
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723438]   with arguments:
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723443]     /sbin/init
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723447]     5
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723451]   with environment:
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723456]     HOME=/
Dec 16 12:00:25 nanopi user.debug kernel: [    1.723460]     TERM=linux
Dec 16 12:00:25 nanopi user.warn kernel: [    1.750089] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.759816] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.759834] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.779044] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.788618] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.798889] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.808484] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.808497] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.827727] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.837386] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.848316] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.858295] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.867865] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.877519] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 12:00:25 nanopi user.warn kernel: [    1.887087] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 12:00:25 nanopi user.info kernel: [    1.896895] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 12:00:25 nanopi user.info kernel: [    1.904646] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 12:00:25 nanopi user.info kernel: [    1.912839] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:00:25 nanopi user.info kernel: [    1.919991] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 12:00:25 nanopi user.info kernel: [    1.924808] usb 1-1: Manufacturer: Realtek
Dec 16 12:00:25 nanopi user.info kernel: [    1.928911] usb 1-1: SerialNumber: 00e04c000001
Dec 16 12:00:25 nanopi user.info kernel: [    1.934209] usb 1-1: skipping disabled interface 0
Dec 16 12:00:25 nanopi user.info kernel: [    1.939040] usb 1-1: skipping disabled interface 1
Dec 16 12:00:25 nanopi user.info kernel: [    2.049323] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 12:00:25 nanopi user.info kernel: [    2.213328] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 12:00:25 nanopi user.info kernel: [    2.221602] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:00:25 nanopi user.info kernel: [    2.228746] usb 3-1: Product: VE SLCAN Interface
Dec 16 12:00:25 nanopi user.info kernel: [    2.233431] usb 3-1: Manufacturer: Victron Energy
Dec 16 12:00:25 nanopi user.info kernel: [    2.238152] usb 3-1: SerialNumber: D307F4KH
Dec 16 12:00:25 nanopi user.info kernel: [    2.250200] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 12:00:25 nanopi user.info kernel: [    2.255240] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:00:25 nanopi user.info kernel: [    2.331311] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 12:00:25 nanopi user.info kernel: [    2.340921] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:00:25 nanopi user.info kernel: [    2.348107] usb 4-1: Product: FT232R USB UART
Dec 16 12:00:25 nanopi user.info kernel: [    2.352577] usb 4-1: Manufacturer: FTDI
Dec 16 12:00:25 nanopi user.info kernel: [    2.356453] usb 4-1: SerialNumber: AG0KG587
Dec 16 12:00:25 nanopi daemon.info kernel: [    2.388989] udevd[130]: starting version 3.2.9
Dec 16 12:00:25 nanopi user.notice kernel: [    2.405581] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:00:25 nanopi user.notice kernel: [    2.412665] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:00:25 nanopi user.notice kernel: [    2.419228] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:00:25 nanopi daemon.info kernel: [    2.449057] udevd[131]: starting eudev-3.2.9
Dec 16 12:00:25 nanopi user.info kernel: [    2.592628] usbcore: registered new interface driver usbserial_generic
Dec 16 12:00:25 nanopi user.info kernel: [    2.599417] usbserial: USB Serial support registered for generic
Dec 16 12:00:25 nanopi user.warn kernel: [    2.611413] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 12:00:25 nanopi user.info kernel: [    2.638123] usbcore: registered new interface driver ftdi_sio
Dec 16 12:00:25 nanopi user.info kernel: [    2.648493] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 12:00:25 nanopi user.info kernel: [    2.656365] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 12:00:25 nanopi user.info kernel: [    2.663523] usb 3-1: Detected FT-X
Dec 16 12:00:25 nanopi user.notice kernel: [    2.683905] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 12:00:25 nanopi user.info kernel: [    2.701122] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 12:00:25 nanopi user.info kernel: [    2.707787] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 12:00:25 nanopi user.info kernel: [    2.714054] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 12:00:25 nanopi user.info kernel: [    2.720181] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 12:00:25 nanopi user.info kernel: [    2.721792] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 12:00:25 nanopi user.warn kernel: [    2.726033] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 12:00:25 nanopi user.info kernel: [    2.733562] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 12:00:25 nanopi user.info kernel: [    2.746280] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 12:00:25 nanopi user.info kernel: [    2.749587] usb 4-1: Detected FT232RL
Dec 16 12:00:25 nanopi user.notice kernel: [    2.752531] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 12:00:25 nanopi user.info kernel: [    2.756669] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 12:00:25 nanopi user.info kernel: [    2.761007] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 12:00:25 nanopi user.info kernel: [    2.766957] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 12:00:25 nanopi user.info kernel: [    2.774170] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 12:00:25 nanopi user.info kernel: [    2.780406] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 12:00:25 nanopi user.info kernel: [    2.785432] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 12:00:25 nanopi user.info kernel: [    2.791725] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 12:00:25 nanopi user.info kernel: [    2.798505] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 12:00:25 nanopi user.info kernel: [    2.804781] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 12:00:25 nanopi user.info kernel: [    2.811047] lima 1c40000.gpu: bus rate = 200000000
Dec 16 12:00:25 nanopi user.info kernel: [    2.820721] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 12:00:25 nanopi user.info kernel: [    2.824243] lima 1c40000.gpu: mod rate = 297000000
Dec 16 12:00:25 nanopi user.err kernel: [    2.824353] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 12:00:25 nanopi user.info kernel: [    2.829892] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 12:00:25 nanopi user.info kernel: [    2.836561] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 12:00:25 nanopi user.warn kernel: [    2.836630] 8723bu: loading out-of-tree module taints kernel.
Dec 16 12:00:25 nanopi user.info kernel: [    2.840262] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 12:00:25 nanopi user.info kernel: [    2.879728] lima 1c40000.gpu: Failed to register cooling device
Dec 16 12:00:25 nanopi user.info kernel: [    2.888112] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 12:00:25 nanopi user.info kernel: [    2.948693] CAN device driver interface
Dec 16 12:00:25 nanopi user.info kernel: [    2.965095] slcan: serial line CAN interface driver
Dec 16 12:00:25 nanopi user.info kernel: [    2.970489] slcan: 10 dynamic interface channels.
Dec 16 12:00:25 nanopi user.info kernel: [    2.985861] can0: renamed from slcan0
Dec 16 12:00:25 nanopi user.info kernel: [    3.177482] usbcore: registered new interface driver rtl8723bu
Dec 16 12:00:25 nanopi user.info kernel: [    3.209066] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 12:00:25 nanopi user.info kernel: [    3.269688] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 12:00:25 nanopi user.info kernel: [    3.432741] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 12:00:25 nanopi user.warn kernel: [    4.197991] urandom_read: 4 callbacks suppressed
Dec 16 12:00:25 nanopi user.notice kernel: [    4.198004] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 12:00:25 nanopi user.notice kernel: [    4.277082] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 12:00:25 nanopi user.crit kernel: [    4.861524] watchdog: watchdog0: watchdog did not stop!
Dec 16 12:00:25 nanopi user.notice kernel: [    6.892468] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 12:00:25 nanopi user.info kernel: [    7.091654] Bluetooth: Core ver 2.22
Dec 16 12:00:25 nanopi user.info kernel: [    7.095450] NET: Registered protocol family 31
Dec 16 12:00:25 nanopi user.info kernel: [    7.099976] Bluetooth: HCI device and connection manager initialized
Dec 16 12:00:25 nanopi user.info kernel: [    7.106363] Bluetooth: HCI socket layer initialized
Dec 16 12:00:25 nanopi user.info kernel: [    7.111298] Bluetooth: L2CAP socket layer initialized
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Successfully dropped root privileges.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: avahi-daemon 0.7 starting up.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Successfully called chroot().
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Successfully dropped remaining capabilities.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Loading service file /services/garmin.service.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Loading service file /services/raymarine.service.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Network interface enumeration completed.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Server startup complete. Host name is venus.local. Local service cookie is 2361961264.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Connection Manager version 1.33
Dec 16 12:00:25 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 12:00:25 nanopi daemon.warn connmand[609]: Failed to flush table 'mangle': Invalid argument
Dec 16 12:00:25 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 12:00:25 nanopi daemon.warn connmand[609]: Failed to flush table 'nat': Invalid argument
Dec 16 12:00:25 nanopi daemon.err connmand[609]: iptables support missing error 2 (No such file or directory)
Dec 16 12:00:25 nanopi daemon.warn connmand[609]: Failed to install iptables rules: Invalid argument
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Checking loopback interface settings
Dec 16 12:00:25 nanopi daemon.info connmand[609]: System hostname is nanopi
Dec 16 12:00:25 nanopi daemon.info dbus-daemon[545]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=609 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {update} flags 4098 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi user.info kernel: [    7.722254] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 12:00:25 nanopi user.info kernel: [    7.739071] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 12:00:25 nanopi user.info kernel: [    7.746710] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 12:00:25 nanopi user.warn kernel: [    7.754553] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 12:00:25 nanopi user.info kernel: [    7.770823] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 12:00:25 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 12:00:25 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Successfully called chroot().
Dec 16 12:00:25 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Successfully dropped root privileges.
Dec 16 12:00:25 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Starting with address 169.254.5.165
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Adding interface eth0 [ ethernet ]
Dec 16 12:00:25 nanopi user.info kernel: [    7.780951] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 12:00:25 nanopi user.info kernel: [    7.789531] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 12:00:25 nanopi user.info kernel: [    7.797717] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address 12:F8:0E:3B:19:7F mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 12:00:25 nanopi daemon.info connmand[609]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:00:25 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {update} flags 4098 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Adding interface wifi0 [ wifi ]
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {update} flags 4099 <UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Ignoring interface ap0 (filtered)
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Adding interface ap0 [ wifi ]
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address 12:F8:0E:3B:19:7F mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 4163 <UP,RUNNING>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address 12:F8:0E:3B:19:7F mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 12:00:25 nanopi cron.info crond[686]: (CRON) STARTUP (1.5.5)
Dec 16 12:00:25 nanopi cron.info crond[686]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 12:00:25 nanopi cron.info crond[686]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 35% if used.)
Dec 16 12:00:25 nanopi daemon.warn connmand[609]: Skipping disconnect of carrier, network is connecting.
Dec 16 12:00:25 nanopi daemon.info dbus-daemon[545]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 12:00:25 nanopi daemon.notice wpa_supplicant[667]: Successfully initialized wpa_supplicant
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 12:00:25 nanopi daemon.info avahi-daemon[583]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 12:00:25 nanopi daemon.info connmand[609]: Setting domainname to hwhb.co.uk
Dec 16 12:00:25 nanopi user.notice kernel: [    8.055601] random: crng init done
Dec 16 12:00:25 nanopi daemon.info dnsmasq[561]: started, version 2.83 cachesize 150
Dec 16 12:00:25 nanopi daemon.warn dnsmasq[561]: overflow: 3 log entries lost
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 address 12:F8:0E:3B:19:7F mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {update} flags 36867 <UP>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:00:25 nanopi daemon.info connmand[609]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:00:26 nanopi user.warn wpa_supplicant[667]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 12:00:26 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 12:00:26 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 12:00:26 nanopi user.info kernel: [    8.453766] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 12:00:26 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 12:00:26 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 12:00:26 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00069
Dec 16 12:00:26 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 12:00:26 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 12:00:26 nanopi daemon.info connmand[609]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:00:27 nanopi daemon.info connmand[609]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 12:00:27 nanopi daemon.info connmand[609]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 12:00:27 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 12:00:27 nanopi daemon.info avahi-daemon[583]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 12:00:27 nanopi daemon.info avahi-daemon[583]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 12:00:27 nanopi daemon.info dnsmasq[561]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 12:00:27 nanopi daemon.info dnsmasq[561]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 12:00:31 nanopi daemon.info connmand[609]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 12:00:31 nanopi daemon.info avahi-daemon[583]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 12:00:31 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 12:00:31 nanopi daemon.info avahi-daemon[583]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 12:00:31 nanopi daemon.info avahi-daemon[583]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 12:00:31 nanopi daemon.info connmand[609]: ll-eth0 {add} address 2001:8b0:1552:697c:10f8:eff:fe3b:197f/64 label (null) family 10
Dec 16 12:00:31 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 12:00:31 nanopi user.info kernel: [   13.194662] can: controller area network core
Dec 16 12:00:31 nanopi user.info kernel: [   13.199486] NET: Registered protocol family 29
Dec 16 12:00:31 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Callout BIND, address 169.254.5.165 on interface ll-eth0
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:00:31 nanopi daemon.info connmand[609]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 12:00:31 nanopi user.info kernel: [   13.326084] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 12:00:31 nanopi daemon.info connmand[609]: ll-eth0 {add} address 169.254.5.165/16 label ll-eth0 family 2
Dec 16 12:00:31 nanopi daemon.info connmand[609]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:00:32 nanopi user.info kernel: [   14.206323] can: raw protocol
Dec 16 12:00:33 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 12:00:33 nanopi daemon.info avahi-daemon[583]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 12:00:33 nanopi daemon.info avahi-daemon[583]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 12:00:33 nanopi daemon.info connmand[609]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:00:33 nanopi daemon.info connmand[609]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 12:00:33 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 12:00:33 nanopi daemon.info connmand[609]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 12:00:33 nanopi daemon.info connmand[609]: Ignoring interface ap0 (filtered)
Dec 16 12:00:33 nanopi user.info kernel: [   15.337373] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 12:00:34 nanopi daemon.info avahi-daemon[583]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 12:00:34 nanopi daemon.info avahi-daemon[583]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 12:00:34 nanopi daemon.info avahi-daemon[583]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 12:00:35 nanopi daemon.info avahi-autoipd(ll-eth0)[660]: Successfully claimed IP address 169.254.5.165
Dec 16 12:00:42 nanopi user.info kernel: [   24.140351] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:00:42 nanopi authpriv.notice login[1633]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 12:01:01 nanopi daemon.info connmand[609]: ntp: time slew +1.069946 s
Dec 16 12:02:40 nanopi daemon.warn connmand[609]: Online check failed for 0x119d360 Wired
Dec 16 12:02:40 nanopi daemon.info connmand[609]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:02:46 nanopi daemon.err connmand[609]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 12:04:58 nanopi daemon.warn connmand[609]: Online check failed for 0x119d360 Wired
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 12:06:12 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 12:06:12 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 12:06:12 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 12:06:12 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 12:06:12 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 12:06:12 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 12:06:12 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 12:06:12 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 12:06:12 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 12:06:12 nanopi user.info kernel: [    0.000217] Console: colour dummy device 80x30
Dec 16 12:06:12 nanopi user.info kernel: [    0.000284] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000307] pid_max: default: 32768 minimum: 301
Dec 16 12:06:12 nanopi user.info kernel: [    0.000447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.000464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.001177] CPU: Testing write buffer coherency: ok
Dec 16 12:06:12 nanopi user.err kernel: [    0.001522] /cpus/cpu@0 missing clock-frequency property
Dec 16 12:06:12 nanopi user.err kernel: [    0.001550] /cpus/cpu@1 missing clock-frequency property
Dec 16 12:06:12 nanopi user.err kernel: [    0.001570] /cpus/cpu@2 missing clock-frequency property
Dec 16 12:06:12 nanopi user.err kernel: [    0.001589] /cpus/cpu@3 missing clock-frequency property
Dec 16 12:06:12 nanopi user.info kernel: [    0.001601] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 12:06:12 nanopi user.info kernel: [    0.002191] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 12:06:12 nanopi user.info kernel: [    0.002321] rcu: Hierarchical SRCU implementation.
Dec 16 12:06:12 nanopi user.info kernel: [    0.002958] smp: Bringing up secondary CPUs ...
Dec 16 12:06:12 nanopi user.info kernel: [    0.013715] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 12:06:12 nanopi user.info kernel: [    0.024531] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 12:06:12 nanopi user.info kernel: [    0.035297] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 12:06:12 nanopi user.info kernel: [    0.035393] smp: Brought up 1 node, 4 CPUs
Dec 16 12:06:12 nanopi user.info kernel: [    0.035421] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 12:06:12 nanopi user.info kernel: [    0.035430] CPU: All CPU(s) started in HYP mode.
Dec 16 12:06:12 nanopi user.info kernel: [    0.035436] CPU: Virtualization extensions available.
Dec 16 12:06:12 nanopi user.info kernel: [    0.036134] devtmpfs: initialized
Dec 16 12:06:12 nanopi user.info kernel: [    0.041412] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 12:06:12 nanopi user.info kernel: [    0.041611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 12:06:12 nanopi user.info kernel: [    0.041641] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.043926] pinctrl core: initialized pinctrl subsystem
Dec 16 12:06:12 nanopi user.info kernel: [    0.045098] NET: Registered protocol family 16
Dec 16 12:06:12 nanopi user.info kernel: [    0.046582] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 12:06:12 nanopi user.info kernel: [    0.047612] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 12:06:12 nanopi user.info kernel: [    0.048011] cpuidle: using governor menu
Dec 16 12:06:12 nanopi user.info kernel: [    0.048223] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 12:06:12 nanopi user.info kernel: [    0.048236] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 12:06:12 nanopi user.info kernel: [    0.065485] cryptd: max_cpu_qlen set to 1000
Dec 16 12:06:12 nanopi user.info kernel: [    0.066689] vdd-sys-3v3: supplied by vdd-5v
Dec 16 12:06:12 nanopi user.info kernel: [    0.067351] iommu: Default domain type: Translated 
Dec 16 12:06:12 nanopi user.info kernel: [    0.067585] usbcore: registered new interface driver usbfs
Dec 16 12:06:12 nanopi user.info kernel: [    0.067654] usbcore: registered new interface driver hub
Dec 16 12:06:12 nanopi user.info kernel: [    0.067701] usbcore: registered new device driver usb
Dec 16 12:06:12 nanopi user.info kernel: [    0.069135] clocksource: Switched to clocksource arch_sys_counter
Dec 16 12:06:12 nanopi user.info kernel: [    0.076474] NET: Registered protocol family 2
Dec 16 12:06:12 nanopi user.info kernel: [    0.076664] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077384] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077416] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077462] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077526] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077654] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077705] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 12:06:12 nanopi user.info kernel: [    0.077868] NET: Registered protocol family 1
Dec 16 12:06:12 nanopi user.info kernel: [    0.079082] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 12:06:12 nanopi user.notice kernel: [    0.080955] Initialise system trusted keyrings
Dec 16 12:06:12 nanopi user.info kernel: [    0.081146] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 12:06:12 nanopi user.notice kernel: [    0.085207] Key type asymmetric registered
Dec 16 12:06:12 nanopi user.notice kernel: [    0.085229] Asymmetric key parser 'x509' registered
Dec 16 12:06:12 nanopi user.err kernel: [    0.085977] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 12:06:12 nanopi user.info kernel: [    0.089769] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.091718] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.096722] Serial: 8250/16550 driver, 8 ports
Dec 16 12:06:12 nanopi user.info kernel: [    0.117573] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 12:06:12 nanopi user.info kernel: [    0.700040] printk: console [ttyS0] enabled
Dec 16 12:06:12 nanopi user.info kernel: [    0.725312] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 12:06:12 nanopi user.info kernel: [    0.755119] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 12:06:12 nanopi user.info kernel: [    0.784975] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 12:06:12 nanopi user.info kernel: [    0.796029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.802590] ehci-platform: EHCI generic platform driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.808245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.814458] ohci-platform: OHCI generic platform driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.820847] i2c /dev entries driver
Dec 16 12:06:12 nanopi user.info kernel: [    0.824889] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 12:06:12 nanopi user.info kernel: [    0.830728] i2c i2c-0: using generic GPIOs for recovery
Dec 16 12:06:12 nanopi user.info kernel: [    0.837191] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 12:06:12 nanopi user.info kernel: [    0.846002] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 12:06:12 nanopi user.info kernel: [    0.852242] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T12:06:06 UTC (1671192366)
Dec 16 12:06:12 nanopi user.info kernel: [    0.861320] pca953x 0-0020: using no AI
Dec 16 12:06:12 nanopi user.info kernel: [    0.869027] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 12:06:12 nanopi user.info kernel: [    0.877532] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 12:06:12 nanopi user.info kernel: [    0.887484] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 12:06:12 nanopi user.info kernel: [    0.889573] NET: Registered protocol family 10
Dec 16 12:06:12 nanopi user.info kernel: [    0.897270] Segment Routing with IPv6
Dec 16 12:06:12 nanopi user.info kernel: [    0.901047] NET: Registered protocol family 17
Dec 16 12:06:12 nanopi user.notice kernel: [    0.905592] Registering SWP/SWPB emulation handler
Dec 16 12:06:12 nanopi user.info kernel: [    0.911803] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 12:06:12 nanopi user.info kernel: [    0.912331] registered taskstats version 1
Dec 16 12:06:12 nanopi user.info kernel: [    0.917284] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 12:06:12 nanopi user.notice kernel: [    0.929888] Loading compiled-in X.509 certificates
Dec 16 12:06:12 nanopi user.info kernel: [    0.944511] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 12:06:12 nanopi user.info kernel: [    0.990112] mmc1: new DDR MMC card at address 0001
Dec 16 12:06:12 nanopi user.info kernel: [    0.995816] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 12:06:12 nanopi user.info kernel: [    1.000918] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 12:06:12 nanopi user.info kernel: [    1.007346] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 12:06:12 nanopi user.notice kernel: [    1.009722] random: fast init done
Dec 16 12:06:12 nanopi user.info kernel: [    1.017895]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 12:06:12 nanopi user.info kernel: [    1.160057] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.165927] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 12:06:12 nanopi user.info kernel: [    1.174060] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 12:06:12 nanopi user.info kernel: [    1.209148] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 12:06:12 nanopi user.info kernel: [    1.215463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 12:06:12 nanopi user.info kernel: [    1.223747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:06:12 nanopi user.info kernel: [    1.230972] usb usb1: Product: EHCI Host Controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.235848] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 12:06:12 nanopi user.info kernel: [    1.242121] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 12:06:12 nanopi user.info kernel: [    1.247178] hub 1-0:1.0: USB hub found
Dec 16 12:06:12 nanopi user.info kernel: [    1.250999] hub 1-0:1.0: 1 port detected
Dec 16 12:06:12 nanopi user.info kernel: [    1.255762] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.261583] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 12:06:12 nanopi user.info kernel: [    1.269573] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 12:06:12 nanopi user.info kernel: [    1.299141] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 12:06:12 nanopi user.info kernel: [    1.305410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 12:06:12 nanopi user.info kernel: [    1.313691] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:06:12 nanopi user.info kernel: [    1.320917] usb usb2: Product: EHCI Host Controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.325791] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 12:06:12 nanopi user.info kernel: [    1.332067] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 12:06:12 nanopi user.info kernel: [    1.337054] hub 2-0:1.0: USB hub found
Dec 16 12:06:12 nanopi user.info kernel: [    1.340856] hub 2-0:1.0: 1 port detected
Dec 16 12:06:12 nanopi user.info kernel: [    1.345600] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.352441] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 12:06:12 nanopi user.info kernel: [    1.360415] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 12:06:12 nanopi user.info kernel: [    1.433311] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 12:06:12 nanopi user.info kernel: [    1.441599] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:06:12 nanopi user.info kernel: [    1.448813] usb usb3: Product: Generic Platform OHCI controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.454742] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 12:06:12 nanopi user.info kernel: [    1.461012] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 12:06:12 nanopi user.info kernel: [    1.466013] hub 3-0:1.0: USB hub found
Dec 16 12:06:12 nanopi user.info kernel: [    1.469883] hub 3-0:1.0: 1 port detected
Dec 16 12:06:12 nanopi user.info kernel: [    1.474572] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.481442] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 12:06:12 nanopi user.info kernel: [    1.489533] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 12:06:12 nanopi user.info kernel: [    1.539147] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 12:06:12 nanopi user.info kernel: [    1.563298] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 12:06:12 nanopi user.info kernel: [    1.571581] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 12:06:12 nanopi user.info kernel: [    1.578797] usb usb4: Product: Generic Platform OHCI controller
Dec 16 12:06:12 nanopi user.info kernel: [    1.584734] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 12:06:12 nanopi user.info kernel: [    1.591010] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 12:06:12 nanopi user.info kernel: [    1.596050] hub 4-0:1.0: USB hub found
Dec 16 12:06:12 nanopi user.info kernel: [    1.599919] hub 4-0:1.0: 1 port detected
Dec 16 12:06:12 nanopi user.info kernel: [    1.608608] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 12:06:12 nanopi user.info kernel: [    1.621688] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 12:06:12 nanopi user.info kernel: [    1.629010] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 12:06:12 nanopi user.info kernel: [    1.645312] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 12:06:12 nanopi user.info kernel: [    1.650567] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:06:12 nanopi user.info kernel: [    1.658734] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 12:06:12 nanopi user.info kernel: [    1.666135] devtmpfs: mounted
Dec 16 12:06:12 nanopi user.info kernel: [    1.670521] Freeing unused kernel memory: 1024K
Dec 16 12:06:12 nanopi user.info kernel: [    1.699296] Run /sbin/init as init process
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703393]   with arguments:
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703398]     /sbin/init
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703402]     5
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703405]   with environment:
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703410]     HOME=/
Dec 16 12:06:12 nanopi user.debug kernel: [    1.703414]     TERM=linux
Dec 16 12:06:12 nanopi user.warn kernel: [    1.740033] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.749747] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.759330] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.768986] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.778565] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.788222] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.799193] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.809173] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.818732] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.828389] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.837961] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.847618] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.857194] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.857206] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 12:06:12 nanopi user.warn kernel: [    1.876414] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 12:06:12 nanopi user.info kernel: [    1.886161] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 12:06:12 nanopi user.info kernel: [    1.893877] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 12:06:12 nanopi user.info kernel: [    1.902077] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:06:12 nanopi user.info kernel: [    1.909232] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 12:06:12 nanopi user.info kernel: [    1.914021] usb 1-1: Manufacturer: Realtek
Dec 16 12:06:12 nanopi user.info kernel: [    1.918114] usb 1-1: SerialNumber: 00e04c000001
Dec 16 12:06:12 nanopi user.info kernel: [    1.923430] usb 1-1: skipping disabled interface 0
Dec 16 12:06:12 nanopi user.info kernel: [    1.928257] usb 1-1: skipping disabled interface 1
Dec 16 12:06:12 nanopi user.info kernel: [    2.039278] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 12:06:12 nanopi user.info kernel: [    2.203209] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 12:06:12 nanopi user.info kernel: [    2.211427] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:06:12 nanopi user.info kernel: [    2.218558] usb 3-1: Product: VE SLCAN Interface
Dec 16 12:06:12 nanopi user.info kernel: [    2.223202] usb 3-1: Manufacturer: Victron Energy
Dec 16 12:06:12 nanopi user.info kernel: [    2.227915] usb 3-1: SerialNumber: D307F4KH
Dec 16 12:06:12 nanopi user.info kernel: [    2.265747] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 12:06:12 nanopi user.info kernel: [    2.270851] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:06:12 nanopi user.info kernel: [    2.331251] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 12:06:12 nanopi user.info kernel: [    2.339508] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 12:06:12 nanopi user.info kernel: [    2.346640] usb 4-1: Product: FT232R USB UART
Dec 16 12:06:12 nanopi user.info kernel: [    2.352501] usb 4-1: Manufacturer: FTDI
Dec 16 12:06:12 nanopi user.info kernel: [    2.356946] usb 4-1: SerialNumber: AG0KG587
Dec 16 12:06:12 nanopi daemon.info kernel: [    2.422549] udevd[133]: starting version 3.2.9
Dec 16 12:06:12 nanopi user.notice kernel: [    2.439293] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:06:12 nanopi user.notice kernel: [    2.446324] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:06:12 nanopi user.notice kernel: [    2.452890] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 12:06:12 nanopi daemon.info kernel: [    2.482498] udevd[134]: starting eudev-3.2.9
Dec 16 12:06:12 nanopi user.info kernel: [    2.621932] usbcore: registered new interface driver usbserial_generic
Dec 16 12:06:12 nanopi user.warn kernel: [    2.625913] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 12:06:12 nanopi user.info kernel: [    2.628602] usbserial: USB Serial support registered for generic
Dec 16 12:06:12 nanopi user.notice kernel: [    2.634560] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 12:06:12 nanopi user.info kernel: [    2.660160] usbcore: registered new interface driver ftdi_sio
Dec 16 12:06:12 nanopi user.info kernel: [    2.666104] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 12:06:12 nanopi user.info kernel: [    2.674060] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 12:06:12 nanopi user.info kernel: [    2.681204] usb 3-1: Detected FT-X
Dec 16 12:06:12 nanopi user.notice kernel: [    2.706970] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 12:06:12 nanopi user.info kernel: [    2.722713] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 12:06:12 nanopi user.info kernel: [    2.730590] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 12:06:12 nanopi user.info kernel: [    2.737683] usb 4-1: Detected FT232RL
Dec 16 12:06:12 nanopi user.info kernel: [    2.738722] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 12:06:12 nanopi user.info kernel: [    2.747879] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 12:06:12 nanopi user.info kernel: [    2.753237] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 12:06:12 nanopi user.info kernel: [    2.754032] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 12:06:12 nanopi user.warn kernel: [    2.763134] 8723bu: loading out-of-tree module taints kernel.
Dec 16 12:06:12 nanopi user.info kernel: [    2.766869] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 12:06:12 nanopi user.warn kernel: [    2.778386] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 12:06:12 nanopi user.info kernel: [    2.789724] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 12:06:12 nanopi user.info kernel: [    2.797022] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 12:06:12 nanopi user.info kernel: [    2.804401] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 12:06:12 nanopi user.info kernel: [    2.809472] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 12:06:12 nanopi user.info kernel: [    2.816329] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 12:06:12 nanopi user.info kernel: [    2.822087] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 12:06:12 nanopi user.info kernel: [    2.830747] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 12:06:12 nanopi user.info kernel: [    2.836052] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 12:06:12 nanopi user.info kernel: [    2.837632] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 12:06:12 nanopi user.info kernel: [    2.843315] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 12:06:12 nanopi user.info kernel: [    2.849629] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 12:06:12 nanopi user.info kernel: [    2.856046] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 12:06:12 nanopi user.info kernel: [    2.868309] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 12:06:12 nanopi user.info kernel: [    2.877734] lima 1c40000.gpu: bus rate = 200000000
Dec 16 12:06:12 nanopi user.info kernel: [    2.882988] lima 1c40000.gpu: mod rate = 297000000
Dec 16 12:06:12 nanopi user.err kernel: [    2.888288] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 12:06:12 nanopi user.info kernel: [    2.904435] CAN device driver interface
Dec 16 12:06:12 nanopi user.info kernel: [    2.910909] slcan: serial line CAN interface driver
Dec 16 12:06:12 nanopi user.info kernel: [    2.915876] slcan: 10 dynamic interface channels.
Dec 16 12:06:12 nanopi user.info kernel: [    2.917306] lima 1c40000.gpu: Failed to register cooling device
Dec 16 12:06:12 nanopi user.info kernel: [    2.922815] can0: renamed from slcan0
Dec 16 12:06:12 nanopi user.info kernel: [    2.932535] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 12:06:12 nanopi user.info kernel: [    3.102464] usbcore: registered new interface driver rtl8723bu
Dec 16 12:06:12 nanopi user.info kernel: [    3.159336] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 12:06:12 nanopi user.info kernel: [    3.219823] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 12:06:12 nanopi user.info kernel: [    3.343018] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 12:06:12 nanopi user.warn kernel: [    4.112124] urandom_read: 4 callbacks suppressed
Dec 16 12:06:12 nanopi user.notice kernel: [    4.112137] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 12:06:12 nanopi user.notice kernel: [    4.192056] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 12:06:12 nanopi user.crit kernel: [    4.776214] watchdog: watchdog0: watchdog did not stop!
Dec 16 12:06:12 nanopi user.notice kernel: [    6.781455] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 12:06:12 nanopi user.info kernel: [    6.981528] Bluetooth: Core ver 2.22
Dec 16 12:06:12 nanopi user.info kernel: [    6.985368] NET: Registered protocol family 31
Dec 16 12:06:12 nanopi user.info kernel: [    6.990475] Bluetooth: HCI device and connection manager initialized
Dec 16 12:06:12 nanopi user.info kernel: [    6.996902] Bluetooth: HCI socket layer initialized
Dec 16 12:06:12 nanopi user.info kernel: [    7.001896] Bluetooth: L2CAP socket layer initialized
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Successfully dropped root privileges.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: avahi-daemon 0.7 starting up.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Successfully called chroot().
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Successfully dropped remaining capabilities.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Loading service file /services/garmin.service.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Loading service file /services/raymarine.service.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Network interface enumeration completed.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Server startup complete. Host name is venus.local. Local service cookie is 3958348342.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Connection Manager version 1.33
Dec 16 12:06:12 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 12:06:12 nanopi daemon.warn connmand[612]: Failed to flush table 'mangle': Invalid argument
Dec 16 12:06:12 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 12:06:12 nanopi daemon.warn connmand[612]: Failed to flush table 'nat': Invalid argument
Dec 16 12:06:12 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 12:06:12 nanopi daemon.warn connmand[612]: Failed to install iptables rules: Invalid argument
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Checking loopback interface settings
Dec 16 12:06:12 nanopi daemon.info connmand[612]: System hostname is nanopi
Dec 16 12:06:12 nanopi daemon.info dbus-daemon[548]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=612 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {update} flags 4098 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi user.info kernel: [    7.597904] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 12:06:12 nanopi user.info kernel: [    7.613820] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 12:06:12 nanopi user.info kernel: [    7.621454] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 12:06:12 nanopi user.warn kernel: [    7.629250] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 12:06:12 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Adding interface eth0 [ ethernet ]
Dec 16 12:06:12 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully called chroot().
Dec 16 12:06:12 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully dropped root privileges.
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 12:06:12 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Starting with address 169.254.7.223
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address BA:64:44:62:16:E4 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 12:06:12 nanopi user.info kernel: [    7.645629] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 12:06:12 nanopi user.info kernel: [    7.655378] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 12:06:12 nanopi daemon.info connmand[612]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:06:12 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {update} flags 4098 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Adding interface wifi0 [ wifi ]
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {update} flags 4099 <UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Adding interface ap0 [ wifi ]
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address BA:64:44:62:16:E4 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 12:06:12 nanopi user.info kernel: [    7.664335] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4163 <UP,RUNNING>
Dec 16 12:06:12 nanopi user.info kernel: [    7.664774] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address BA:64:44:62:16:E4 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 12:06:12 nanopi daemon.warn connmand[612]: Skipping disconnect of carrier, network is connecting.
Dec 16 12:06:12 nanopi cron.info crond[692]: (CRON) STARTUP (1.5.5)
Dec 16 12:06:12 nanopi cron.info crond[692]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 12:06:12 nanopi cron.info crond[692]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 44% if used.)
Dec 16 12:06:12 nanopi daemon.info dbus-daemon[548]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 12:06:12 nanopi daemon.notice wpa_supplicant[672]: Successfully initialized wpa_supplicant
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 12:06:12 nanopi daemon.info avahi-daemon[586]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 12:06:12 nanopi daemon.info connmand[612]: Setting domainname to hwhb.co.uk
Dec 16 12:06:12 nanopi user.notice kernel: [    7.851483] random: crng init done
Dec 16 12:06:12 nanopi daemon.info dnsmasq[564]: started, version 2.83 cachesize 150
Dec 16 12:06:12 nanopi daemon.warn dnsmasq[564]: overflow: 3 log entries lost
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address BA:64:44:62:16:E4 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {update} flags 36867 <UP>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 12:06:12 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 12:06:13 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 12:06:13 nanopi user.warn wpa_supplicant[672]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 12:06:13 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 12:06:13 nanopi daemon.notice wpa_supplicant[672]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 12:06:13 nanopi daemon.info connmand[612]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:06:13 nanopi user.info kernel: [    8.419873] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 12:06:13 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 12:06:13 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 12:06:13 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 12:06:13 nanopi daemon.info connmand[612]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 12:06:13 nanopi daemon.info dnsmasq[564]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 12:06:13 nanopi daemon.info dnsmasq[564]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 12:06:14 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 12:06:14 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 12:06:14 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 7.99728
Dec 16 12:06:14 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 12:06:14 nanopi daemon.info connmand[612]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 12:06:15 nanopi daemon.info connmand[612]: ll-eth0 {add} address 2001:8b0:1552:697c:b864:44ff:fe62:16e4/64 label (null) family 10
Dec 16 12:06:15 nanopi daemon.info connmand[612]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 12:06:15 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 12:06:15 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 12:06:15 nanopi daemon.info avahi-daemon[586]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 12:06:15 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 12:06:16 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 12:06:17 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Callout BIND, address 169.254.7.223 on interface ll-eth0
Dec 16 12:06:17 nanopi daemon.info connmand[612]: ll-eth0 {add} address 169.254.7.223/16 label ll-eth0 family 2
Dec 16 12:06:17 nanopi daemon.info connmand[612]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 12:06:17 nanopi user.info kernel: [   12.990166] can: controller area network core
Dec 16 12:06:17 nanopi user.info kernel: [   12.994886] NET: Registered protocol family 29
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 12:06:18 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 12:06:18 nanopi user.info kernel: [   13.076524] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 12:06:18 nanopi user.info kernel: [   13.716690] can: raw protocol
Dec 16 12:06:20 nanopi user.info kernel: [   15.092320] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 12:06:20 nanopi daemon.info connmand[612]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 12:06:20 nanopi daemon.info connmand[612]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 12:06:20 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 12:06:20 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 12:06:20 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 12:06:20 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 12:06:20 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 12:06:20 nanopi daemon.info avahi-daemon[586]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 12:06:21 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Successfully claimed IP address 169.254.7.223
Dec 16 12:06:21 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 12:06:21 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 12:06:21 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 12:06:29 nanopi user.info kernel: [   24.351627] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 12:06:29 nanopi authpriv.notice login[1669]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 12:06:46 nanopi daemon.info connmand[612]: ntp: time slew +0.584321 s
Dec 16 12:08:26 nanopi daemon.warn connmand[612]: Online check failed for 0x1d9d360 Wired
Dec 16 12:08:26 nanopi daemon.info connmand[612]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 12:08:28 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 12:10:39 nanopi daemon.warn connmand[612]: Online check failed for 0x1d9d360 Wired
Dec 16 13:09:13 nanopi user.notice shutdown[12712]: shutting down for system reboot
Dec 16 13:09:13 nanopi daemon.info init: Switching to runlevel: 6
Dec 16 13:09:13 nanopi user.notice root: Stopping watchdog (keeping hw watchdog alive)
Dec 16 13:09:13 nanopi user.crit kernel: [ 3788.006074] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:09:13 nanopi daemon.info haveged: haveged: Stopping due to signal 15
Dec 16 13:09:13 nanopi daemon.notice wpa_supplicant[672]: wifi0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
Dec 16 13:09:13 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Got SIGTERM, quitting.
Dec 16 13:09:13 nanopi daemon.info avahi-autoipd(ll-eth0)[663]: Callout STOP, address 169.254.7.223 on interface ll-eth0
Dec 16 13:09:13 nanopi daemon.info connmand[612]: eth0 {RX} 49957 packets 8371177 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: eth0 {TX} 27861 packets 14551292 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:09:13 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {RX} 3625 packets 836473 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {TX} 594 packets 197669 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address BA:64:44:62:16:E4 mtu 1450
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {del} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {del} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {del} address 2001:8b0:1552:697c:b864:44ff:fe62:16e4/64 label (null)
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {del} address 169.254.7.223/16 label ll-eth0
Dec 16 13:09:13 nanopi daemon.info connmand[612]: ll-eth0 {dellink} index 6 operstate 2 <DOWN>
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {RX} 3625 packets 836473 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {TX} 594 packets 197669 bytes
Dec 16 13:09:13 nanopi daemon.info connmand[612]: (null) {remove} index 6
Dec 16 13:09:13 nanopi daemon.info avahi-autoipd(ll-eth0)[674]: client: Cannot find device "ll-eth0"
Dec 16 13:09:13 nanopi daemon.warn avahi-autoipd(ll-eth0)[674]: Script execution failed with return value 1
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: Got SIGTERM, quitting.
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:09:14 nanopi daemon.info avahi-daemon[586]: avahi-daemon 0.7 exiting.
Dec 16 13:09:14 nanopi daemon.info bluetoothd[559]: Terminating
Dec 16 13:09:14 nanopi daemon.info bluetoothd[559]: Exit
Dec 16 13:09:14 nanopi daemon.err connmand[612]: D-Bus disconnect
Dec 16 13:09:14 nanopi daemon.err connmand[612]: Time request for server 192.168.10.1 failed (101/Network is unreachable)
Dec 16 13:09:14 nanopi daemon.err connmand[612]: Time request for server 192.168.10.1 failed (101/Network is unreachable)
Dec 16 13:09:14 nanopi daemon.info connmand[612]: Remove interface wifi0 [ wifi ]
Dec 16 13:09:14 nanopi daemon.info connmand[612]: Remove interface eth0 [ ethernet ]
Dec 16 13:09:14 nanopi daemon.info connmand[612]: Remove interface ap0 [ wifi ]
Dec 16 13:09:14 nanopi user.info kernel: [ 3788.774545] dwmac-sun8i 1c30000.ethernet eth0: Link is Down
Dec 16 13:09:14 nanopi daemon.info connmand[612]: eth0 {remove} index 2
Dec 16 13:09:14 nanopi daemon.info connmand[612]: wifi0 {remove} index 4
Dec 16 13:09:14 nanopi daemon.info connmand[612]: ap0 {remove} index 5
Dec 16 13:09:14 nanopi daemon.info connmand[612]: Exit
Dec 16 13:09:14 nanopi daemon.info dnsmasq[564]: exiting on receipt of SIGTERM
Dec 16 13:09:14 nanopi daemon.notice wpa_supplicant[672]: nl80211: deinit ifname=wifi0 disabled_11b_rates=0
Dec 16 13:09:14 nanopi user.info connmand_watch: no longer restarting the connmand process
Dec 16 12:06:12 nanopi daemon.info dnsmasq[571]: started, version 2.83 cachesize 150
Dec 16 13:09:14 nanopi daemon.warn dnsmasq[571]: overflow: 4 log entries lost
Dec 16 13:09:14 nanopi daemon.notice wpa_supplicant[672]: wifi0: CTRL-EVENT-TERMINATING 
Dec 16 13:09:14 nanopi syslog.info syslogd exiting

>>>>>>>>>>>> MANUAL REBOOT <<<<<<<<<<<<<<<<<

Dec 16 13:09:32 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 13:09:32 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Dec 16 13:09:32 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 13:09:32 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 13:09:32 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 13:09:32 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 13:09:32 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 13:09:32 nanopi user.info kernel: [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 13:09:32 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 13:09:32 nanopi user.info kernel: [    0.000214] Console: colour dummy device 80x30
Dec 16 13:09:32 nanopi user.info kernel: [    0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000304] pid_max: default: 32768 minimum: 301
Dec 16 13:09:32 nanopi user.info kernel: [    0.000442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.000458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.001169] CPU: Testing write buffer coherency: ok
Dec 16 13:09:32 nanopi user.err kernel: [    0.001515] /cpus/cpu@0 missing clock-frequency property
Dec 16 13:09:32 nanopi user.err kernel: [    0.001540] /cpus/cpu@1 missing clock-frequency property
Dec 16 13:09:32 nanopi user.err kernel: [    0.001558] /cpus/cpu@2 missing clock-frequency property
Dec 16 13:09:32 nanopi user.err kernel: [    0.001578] /cpus/cpu@3 missing clock-frequency property
Dec 16 13:09:32 nanopi user.info kernel: [    0.001591] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 13:09:32 nanopi user.info kernel: [    0.002178] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 13:09:32 nanopi user.info kernel: [    0.002306] rcu: Hierarchical SRCU implementation.
Dec 16 13:09:32 nanopi user.info kernel: [    0.002940] smp: Bringing up secondary CPUs ...
Dec 16 13:09:32 nanopi user.info kernel: [    0.013701] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 13:09:32 nanopi user.info kernel: [    0.024525] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 13:09:32 nanopi user.info kernel: [    0.035289] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 13:09:32 nanopi user.info kernel: [    0.035387] smp: Brought up 1 node, 4 CPUs
Dec 16 13:09:32 nanopi user.info kernel: [    0.035418] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 13:09:32 nanopi user.info kernel: [    0.035426] CPU: All CPU(s) started in HYP mode.
Dec 16 13:09:32 nanopi user.info kernel: [    0.035432] CPU: Virtualization extensions available.
Dec 16 13:09:32 nanopi user.info kernel: [    0.036131] devtmpfs: initialized
Dec 16 13:09:32 nanopi user.info kernel: [    0.041416] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 13:09:32 nanopi user.info kernel: [    0.041618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 13:09:32 nanopi user.info kernel: [    0.041645] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.043927] pinctrl core: initialized pinctrl subsystem
Dec 16 13:09:32 nanopi user.info kernel: [    0.044997] NET: Registered protocol family 16
Dec 16 13:09:32 nanopi user.info kernel: [    0.046556] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 13:09:32 nanopi user.info kernel: [    0.047588] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 13:09:32 nanopi user.info kernel: [    0.047987] cpuidle: using governor menu
Dec 16 13:09:32 nanopi user.info kernel: [    0.048196] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 13:09:32 nanopi user.info kernel: [    0.048208] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 13:09:32 nanopi user.info kernel: [    0.065488] cryptd: max_cpu_qlen set to 1000
Dec 16 13:09:32 nanopi user.info kernel: [    0.066694] vdd-sys-3v3: supplied by vdd-5v
Dec 16 13:09:32 nanopi user.info kernel: [    0.067364] iommu: Default domain type: Translated 
Dec 16 13:09:32 nanopi user.info kernel: [    0.067598] usbcore: registered new interface driver usbfs
Dec 16 13:09:32 nanopi user.info kernel: [    0.067666] usbcore: registered new interface driver hub
Dec 16 13:09:32 nanopi user.info kernel: [    0.067714] usbcore: registered new device driver usb
Dec 16 13:09:32 nanopi user.info kernel: [    0.069158] clocksource: Switched to clocksource arch_sys_counter
Dec 16 13:09:32 nanopi user.info kernel: [    0.076601] NET: Registered protocol family 2
Dec 16 13:09:32 nanopi user.info kernel: [    0.076797] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077484] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077513] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077560] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077624] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077751] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077801] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:09:32 nanopi user.info kernel: [    0.077965] NET: Registered protocol family 1
Dec 16 13:09:32 nanopi user.info kernel: [    0.079293] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 13:09:32 nanopi user.notice kernel: [    0.081057] Initialise system trusted keyrings
Dec 16 13:09:32 nanopi user.info kernel: [    0.081258] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 13:09:32 nanopi user.notice kernel: [    0.085256] Key type asymmetric registered
Dec 16 13:09:32 nanopi user.notice kernel: [    0.085279] Asymmetric key parser 'x509' registered
Dec 16 13:09:32 nanopi user.err kernel: [    0.086048] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 13:09:32 nanopi user.info kernel: [    0.089766] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.091674] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.096682] Serial: 8250/16550 driver, 8 ports
Dec 16 13:09:32 nanopi user.info kernel: [    0.117483] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 13:09:32 nanopi user.info kernel: [    0.699845] printk: console [ttyS0] enabled
Dec 16 13:09:32 nanopi user.info kernel: [    0.725158] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 13:09:32 nanopi user.info kernel: [    0.755039] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 13:09:32 nanopi user.info kernel: [    0.784852] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 13:09:32 nanopi user.info kernel: [    0.795878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.802436] ehci-platform: EHCI generic platform driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.808091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.814307] ohci-platform: OHCI generic platform driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.820704] i2c /dev entries driver
Dec 16 13:09:32 nanopi user.info kernel: [    0.824763] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 13:09:32 nanopi user.info kernel: [    0.830608] i2c i2c-0: using generic GPIOs for recovery
Dec 16 13:09:32 nanopi user.info kernel: [    0.837070] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 13:09:32 nanopi user.info kernel: [    0.845851] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 13:09:32 nanopi user.info kernel: [    0.852091] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T13:09:26 UTC (1671196166)
Dec 16 13:09:32 nanopi user.info kernel: [    0.861249] pca953x 0-0020: using no AI
Dec 16 13:09:32 nanopi user.info kernel: [    0.869521] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 13:09:32 nanopi user.info kernel: [    0.878012] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 13:09:32 nanopi user.info kernel: [    0.887906] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 13:09:32 nanopi user.info kernel: [    0.890019] NET: Registered protocol family 10
Dec 16 13:09:32 nanopi user.info kernel: [    0.897734] Segment Routing with IPv6
Dec 16 13:09:32 nanopi user.info kernel: [    0.901513] NET: Registered protocol family 17
Dec 16 13:09:32 nanopi user.notice kernel: [    0.906057] Registering SWP/SWPB emulation handler
Dec 16 13:09:32 nanopi user.info kernel: [    0.912699] registered taskstats version 1
Dec 16 13:09:32 nanopi user.info kernel: [    0.913200] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:09:32 nanopi user.notice kernel: [    0.916812] Loading compiled-in X.509 certificates
Dec 16 13:09:32 nanopi user.info kernel: [    0.923823] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:09:32 nanopi user.info kernel: [    0.938410] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 13:09:32 nanopi user.notice kernel: [    0.993949] random: fast init done
Dec 16 13:09:32 nanopi user.info kernel: [    0.997495] mmc1: new DDR MMC card at address 0001
Dec 16 13:09:32 nanopi user.info kernel: [    1.003214] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 13:09:32 nanopi user.info kernel: [    1.008251] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 13:09:32 nanopi user.info kernel: [    1.014829] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 13:09:32 nanopi user.info kernel: [    1.022231]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 13:09:32 nanopi user.info kernel: [    1.170077] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.175946] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 13:09:32 nanopi user.info kernel: [    1.184061] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 13:09:32 nanopi user.info kernel: [    1.219182] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:09:32 nanopi user.info kernel: [    1.225495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:09:32 nanopi user.info kernel: [    1.233783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:09:32 nanopi user.info kernel: [    1.241009] usb usb1: Product: EHCI Host Controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.245884] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:09:32 nanopi user.info kernel: [    1.252157] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 13:09:32 nanopi user.info kernel: [    1.257212] hub 1-0:1.0: USB hub found
Dec 16 13:09:32 nanopi user.info kernel: [    1.261032] hub 1-0:1.0: 1 port detected
Dec 16 13:09:32 nanopi user.info kernel: [    1.265795] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.271613] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 13:09:32 nanopi user.info kernel: [    1.279608] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 13:09:32 nanopi user.info kernel: [    1.309165] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:09:32 nanopi user.info kernel: [    1.315439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:09:32 nanopi user.info kernel: [    1.323720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:09:32 nanopi user.info kernel: [    1.330946] usb usb2: Product: EHCI Host Controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.335820] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:09:32 nanopi user.info kernel: [    1.342096] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 13:09:32 nanopi user.info kernel: [    1.347080] hub 2-0:1.0: USB hub found
Dec 16 13:09:32 nanopi user.info kernel: [    1.350889] hub 2-0:1.0: 1 port detected
Dec 16 13:09:32 nanopi user.info kernel: [    1.355614] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.362438] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 13:09:32 nanopi user.info kernel: [    1.370402] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 13:09:32 nanopi user.info kernel: [    1.443336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:09:32 nanopi user.info kernel: [    1.451622] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:09:32 nanopi user.info kernel: [    1.458837] usb usb3: Product: Generic Platform OHCI controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.464766] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:09:32 nanopi user.info kernel: [    1.471036] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 13:09:32 nanopi user.info kernel: [    1.476017] hub 3-0:1.0: USB hub found
Dec 16 13:09:32 nanopi user.info kernel: [    1.479894] hub 3-0:1.0: 1 port detected
Dec 16 13:09:32 nanopi user.info kernel: [    1.484564] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.491479] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 13:09:32 nanopi user.info kernel: [    1.499477] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 13:09:32 nanopi user.info kernel: [    1.549179] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 13:09:32 nanopi user.info kernel: [    1.573384] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:09:32 nanopi user.info kernel: [    1.581663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:09:32 nanopi user.info kernel: [    1.588877] usb usb4: Product: Generic Platform OHCI controller
Dec 16 13:09:32 nanopi user.info kernel: [    1.594806] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:09:32 nanopi user.info kernel: [    1.601080] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 13:09:32 nanopi user.info kernel: [    1.606108] hub 4-0:1.0: USB hub found
Dec 16 13:09:32 nanopi user.info kernel: [    1.609988] hub 4-0:1.0: 1 port detected
Dec 16 13:09:32 nanopi user.info kernel: [    1.618749] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 13:09:32 nanopi user.info kernel: [    1.632818] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:09:32 nanopi user.info kernel: [    1.641036] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 13:09:32 nanopi user.info kernel: [    1.648378] devtmpfs: mounted
Dec 16 13:09:32 nanopi user.info kernel: [    1.652759] Freeing unused kernel memory: 1024K
Dec 16 13:09:32 nanopi user.info kernel: [    1.679322] Run /sbin/init as init process
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683417]   with arguments:
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683422]     /sbin/init
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683426]     5
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683430]   with environment:
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683434]     HOME=/
Dec 16 13:09:32 nanopi user.debug kernel: [    1.683438]     TERM=linux
Dec 16 13:09:32 nanopi user.warn kernel: [    1.760021] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.769718] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.779303] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.788953] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.798533] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.808422] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.817993] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.827648] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.837266] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.846939] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.856539] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.856551] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.856567] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.885431] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 13:09:32 nanopi user.warn kernel: [    1.895055] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 13:09:32 nanopi user.info kernel: [    1.904858] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:09:32 nanopi user.info kernel: [    1.912528] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 13:09:32 nanopi user.info kernel: [    1.920774] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:09:32 nanopi user.info kernel: [    1.927936] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 13:09:32 nanopi user.info kernel: [    1.932768] usb 1-1: Manufacturer: Realtek
Dec 16 13:09:32 nanopi user.info kernel: [    1.936892] usb 1-1: SerialNumber: 00e04c000001
Dec 16 13:09:32 nanopi user.info kernel: [    1.942445] usb 1-1: skipping disabled interface 0
Dec 16 13:09:32 nanopi user.info kernel: [    1.947287] usb 1-1: skipping disabled interface 1
Dec 16 13:09:32 nanopi user.info kernel: [    2.027805] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:09:32 nanopi user.info kernel: [    2.059296] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:09:32 nanopi daemon.info kernel: [    2.162156] udevd[131]: starting version 3.2.9
Dec 16 13:09:32 nanopi user.notice kernel: [    2.178958] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:09:32 nanopi user.notice kernel: [    2.186041] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:09:32 nanopi user.notice kernel: [    2.192613] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:09:32 nanopi user.info kernel: [    2.193205] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 13:09:32 nanopi user.info kernel: [    2.207329] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:09:32 nanopi user.info kernel: [    2.214527] usb 3-1: Product: VE SLCAN Interface
Dec 16 13:09:32 nanopi user.info kernel: [    2.219167] usb 3-1: Manufacturer: Victron Energy
Dec 16 13:09:32 nanopi daemon.info kernel: [    2.223067] udevd[132]: starting eudev-3.2.9
Dec 16 13:09:32 nanopi user.info kernel: [    2.223899] usb 3-1: SerialNumber: D307F4KH
Dec 16 13:09:32 nanopi user.info kernel: [    2.268830] usbcore: registered new interface driver usbserial_generic
Dec 16 13:09:32 nanopi user.info kernel: [    2.275654] usbserial: USB Serial support registered for generic
Dec 16 13:09:32 nanopi user.info kernel: [    2.289385] usbcore: registered new interface driver ftdi_sio
Dec 16 13:09:32 nanopi user.info kernel: [    2.297138] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 13:09:32 nanopi user.info kernel: [    2.304946] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:09:32 nanopi user.info kernel: [    2.312048] usb 3-1: Detected FT-X
Dec 16 13:09:32 nanopi user.info kernel: [    2.322878] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 13:09:32 nanopi user.info kernel: [    2.383340] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 13:09:32 nanopi user.info kernel: [    2.391663] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:09:32 nanopi user.info kernel: [    2.398826] usb 4-1: Product: FT232R USB UART
Dec 16 13:09:32 nanopi user.info kernel: [    2.403310] usb 4-1: Manufacturer: FTDI
Dec 16 13:09:32 nanopi user.info kernel: [    2.407198] usb 4-1: SerialNumber: AG0KG587
Dec 16 13:09:32 nanopi user.info kernel: [    2.437192] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:09:32 nanopi user.info kernel: [    2.444473] usb 4-1: Detected FT232RL
Dec 16 13:09:32 nanopi user.warn kernel: [    2.445074] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 13:09:32 nanopi user.info kernel: [    2.453965] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 13:09:32 nanopi user.info kernel: [    2.466523] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 13:09:32 nanopi user.info kernel: [    2.473129] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 13:09:32 nanopi user.info kernel: [    2.477910] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 13:09:32 nanopi user.info kernel: [    2.479607] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 13:09:32 nanopi user.info kernel: [    2.485886] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 13:09:32 nanopi user.info kernel: [    2.492256] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 13:09:32 nanopi user.info kernel: [    2.498227] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 13:09:32 nanopi user.info kernel: [    2.512189] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 13:09:32 nanopi user.info kernel: [    2.517944] lima 1c40000.gpu: bus rate = 200000000
Dec 16 13:09:32 nanopi user.info kernel: [    2.517972] lima 1c40000.gpu: mod rate = 297000000
Dec 16 13:09:32 nanopi user.warn kernel: [    2.522835] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 13:09:32 nanopi user.err kernel: [    2.527688] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 13:09:32 nanopi user.info kernel: [    2.537275] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 13:09:32 nanopi user.notice kernel: [    2.543346] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 13:09:32 nanopi user.info kernel: [    2.560233] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 13:09:32 nanopi user.info kernel: [    2.567507] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 13:09:32 nanopi user.info kernel: [    2.572523] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 13:09:32 nanopi user.info kernel: [    2.579378] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 13:09:32 nanopi user.info kernel: [    2.585061] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 13:09:32 nanopi user.info kernel: [    2.593999] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 13:09:32 nanopi user.info kernel: [    2.601654] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 13:09:32 nanopi user.info kernel: [    2.608161] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 13:09:32 nanopi user.notice kernel: [    2.609626] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 13:09:32 nanopi user.info kernel: [    2.623354] lima 1c40000.gpu: Failed to register cooling device
Dec 16 13:09:32 nanopi user.info kernel: [    2.630692] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 13:09:32 nanopi user.warn kernel: [    2.642763] 8723bu: loading out-of-tree module taints kernel.
Dec 16 13:09:32 nanopi user.info kernel: [    2.668517] CAN device driver interface
Dec 16 13:09:32 nanopi user.info kernel: [    2.678171] slcan: serial line CAN interface driver
Dec 16 13:09:32 nanopi user.info kernel: [    2.683281] slcan: 10 dynamic interface channels.
Dec 16 13:09:32 nanopi user.info kernel: [    2.690877] can0: renamed from slcan0
Dec 16 13:09:32 nanopi user.info kernel: [    2.933493] usbcore: registered new interface driver rtl8723bu
Dec 16 13:09:32 nanopi user.info kernel: [    2.965367] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 13:09:32 nanopi user.info kernel: [    3.019666] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 13:09:32 nanopi user.info kernel: [    3.133078] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 13:09:32 nanopi user.warn kernel: [    3.903804] urandom_read: 4 callbacks suppressed
Dec 16 13:09:32 nanopi user.notice kernel: [    3.903816] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 13:09:32 nanopi user.notice kernel: [    3.983436] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 13:09:32 nanopi user.crit kernel: [    4.571731] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:09:32 nanopi user.notice kernel: [    6.601610] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 13:09:32 nanopi user.info kernel: [    6.802685] Bluetooth: Core ver 2.22
Dec 16 13:09:32 nanopi user.info kernel: [    6.806573] NET: Registered protocol family 31
Dec 16 13:09:32 nanopi user.info kernel: [    6.811602] Bluetooth: HCI device and connection manager initialized
Dec 16 13:09:32 nanopi user.info kernel: [    6.818028] Bluetooth: HCI socket layer initialized
Dec 16 13:09:32 nanopi user.info kernel: [    6.823029] Bluetooth: L2CAP socket layer initialized
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Successfully dropped root privileges.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: avahi-daemon 0.7 starting up.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Successfully called chroot().
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Successfully dropped remaining capabilities.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Loading service file /services/garmin.service.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Loading service file /services/raymarine.service.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Network interface enumeration completed.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Server startup complete. Host name is venus.local. Local service cookie is 218836129.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Connection Manager version 1.33
Dec 16 13:09:32 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 13:09:32 nanopi daemon.warn connmand[611]: Failed to flush table 'mangle': Invalid argument
Dec 16 13:09:32 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 13:09:32 nanopi daemon.warn connmand[611]: Failed to flush table 'nat': Invalid argument
Dec 16 13:09:32 nanopi daemon.err connmand[611]: iptables support missing error 2 (No such file or directory)
Dec 16 13:09:32 nanopi daemon.warn connmand[611]: Failed to install iptables rules: Invalid argument
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Checking loopback interface settings
Dec 16 13:09:32 nanopi daemon.info connmand[611]: System hostname is nanopi
Dec 16 13:09:32 nanopi daemon.info dbus-daemon[548]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=611 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {update} flags 4098 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi user.info kernel: [    7.420717] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 13:09:32 nanopi user.info kernel: [    7.435253] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 13:09:32 nanopi user.info kernel: [    7.442727] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 13:09:32 nanopi user.warn kernel: [    7.442749] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 13:09:32 nanopi user.info kernel: [    7.457855] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Adding interface eth0 [ ethernet ]
Dec 16 13:09:32 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 13:09:32 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully called chroot().
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:09:32 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully dropped root privileges.
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:CA:E3:29:AB:74 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 13:09:32 nanopi daemon.info connmand[611]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:09:32 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {update} flags 4098 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Adding interface wifi0 [ wifi ]
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {update} flags 4099 <UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Ignoring interface ap0 (filtered)
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Adding interface ap0 [ wifi ]
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:CA:E3:29:AB:74 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 4163 <UP,RUNNING>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:CA:E3:29:AB:74 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:09:32 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Starting with address 169.254.8.252
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {RX} 1 packets 60 bytes
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {TX} 0 packets 0 bytes
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:09:32 nanopi user.info kernel: [    7.472218] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 13:09:32 nanopi user.info kernel: [    7.481264] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 13:09:32 nanopi user.info kernel: [    7.488107] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready
Dec 16 13:09:32 nanopi daemon.warn connmand[611]: Skipping disconnect of carrier, network is connecting.
Dec 16 13:09:32 nanopi daemon.info dbus-daemon[548]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 13:09:32 nanopi daemon.notice wpa_supplicant[663]: Successfully initialized wpa_supplicant
Dec 16 13:09:32 nanopi cron.info crond[691]: (CRON) STARTUP (1.5.5)
Dec 16 13:09:32 nanopi cron.info crond[691]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 13:09:32 nanopi cron.info crond[691]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 74% if used.)
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 13:09:32 nanopi daemon.info avahi-daemon[585]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 13:09:32 nanopi daemon.info connmand[611]: Setting domainname to hwhb.co.uk
Dec 16 13:09:32 nanopi daemon.info dnsmasq[563]: started, version 2.83 cachesize 150
Dec 16 13:09:32 nanopi daemon.warn dnsmasq[563]: overflow: 3 log entries lost
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {RX} 1 packets 60 bytes
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {TX} 0 packets 0 bytes
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 address EA:CA:E3:29:AB:74 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {update} flags 36867 <UP>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:09:32 nanopi daemon.info connmand[611]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:09:32 nanopi user.warn wpa_supplicant[663]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 13:09:32 nanopi daemon.notice wpa_supplicant[663]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:09:33 nanopi daemon.notice wpa_supplicant[663]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:09:33 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 13:09:33 nanopi daemon.info connmand[611]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:09:33 nanopi user.notice kernel: [    8.057392] random: crng init done
Dec 16 13:09:33 nanopi user.info kernel: [    8.232470] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 13:09:33 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 13:09:33 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 13:09:33 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00153
Dec 16 13:09:33 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 13:09:33 nanopi daemon.info connmand[611]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:33 nanopi daemon.info connmand[611]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:33 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:09:33 nanopi daemon.info avahi-daemon[585]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 13:09:33 nanopi daemon.info avahi-daemon[585]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:09:34 nanopi daemon.info dnsmasq[563]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 13:09:34 nanopi daemon.info dnsmasq[563]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 13:09:35 nanopi daemon.info connmand[611]: ll-eth0 {add} address 2001:8b0:1552:697c:e8ca:e3ff:fe29:ab74/64 label (null) family 10
Dec 16 13:09:35 nanopi daemon.info connmand[611]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 13:09:35 nanopi daemon.info avahi-daemon[585]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:09:35 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:09:35 nanopi daemon.info avahi-daemon[585]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:09:35 nanopi daemon.info avahi-daemon[585]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 13:09:35 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:09:38 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Callout BIND, address 169.254.8.252 on interface ll-eth0
Dec 16 13:09:38 nanopi daemon.info connmand[611]: ll-eth0 {add} address 169.254.8.252/16 label ll-eth0 family 2
Dec 16 13:09:38 nanopi daemon.info connmand[611]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:09:38 nanopi user.info kernel: [   13.201716] can: controller area network core
Dec 16 13:09:38 nanopi user.info kernel: [   13.206317] NET: Registered protocol family 29
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:09:38 nanopi user.info kernel: [   13.302350] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:09:38 nanopi daemon.info connmand[611]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 13:09:39 nanopi user.info kernel: [   14.023814] can: raw protocol
Dec 16 13:09:40 nanopi daemon.info connmand[611]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:09:40 nanopi daemon.info connmand[611]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:09:40 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:09:40 nanopi daemon.info connmand[611]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 13:09:40 nanopi daemon.info connmand[611]: Ignoring interface ap0 (filtered)
Dec 16 13:09:40 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:09:40 nanopi daemon.info avahi-daemon[585]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 13:09:40 nanopi user.info kernel: [   15.225054] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 13:09:40 nanopi daemon.info avahi-daemon[585]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 13:09:41 nanopi daemon.info avahi-daemon[585]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:09:41 nanopi daemon.info avahi-daemon[585]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 13:09:41 nanopi daemon.info avahi-daemon[585]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 13:09:42 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully claimed IP address 169.254.8.252
Dec 16 13:09:48 nanopi user.info kernel: [   22.894948] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:09:48 nanopi authpriv.notice login[1637]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 13:10:05 nanopi daemon.info connmand[611]: ntp: time slew +0.275337 s
Dec 16 13:11:46 nanopi daemon.warn connmand[611]: Online check failed for 0x13a9460 Wired
Dec 16 13:11:46 nanopi daemon.info connmand[611]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:11:48 nanopi daemon.err connmand[611]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:13:59 nanopi daemon.warn connmand[611]: Online check failed for 0x13a9460 Wired
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 13:44:13 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 13:44:13 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 13:44:13 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 13:44:13 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 13:44:13 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 13:44:13 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 13:44:13 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 13:44:13 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 13:44:13 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 13:44:13 nanopi user.info kernel: [    0.000216] Console: colour dummy device 80x30
Dec 16 13:44:13 nanopi user.info kernel: [    0.000284] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000307] pid_max: default: 32768 minimum: 301
Dec 16 13:44:13 nanopi user.info kernel: [    0.000443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.000458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.001170] CPU: Testing write buffer coherency: ok
Dec 16 13:44:13 nanopi user.err kernel: [    0.001514] /cpus/cpu@0 missing clock-frequency property
Dec 16 13:44:13 nanopi user.err kernel: [    0.001540] /cpus/cpu@1 missing clock-frequency property
Dec 16 13:44:13 nanopi user.err kernel: [    0.001559] /cpus/cpu@2 missing clock-frequency property
Dec 16 13:44:13 nanopi user.err kernel: [    0.001579] /cpus/cpu@3 missing clock-frequency property
Dec 16 13:44:13 nanopi user.info kernel: [    0.001592] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 13:44:13 nanopi user.info kernel: [    0.002186] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 13:44:13 nanopi user.info kernel: [    0.002309] rcu: Hierarchical SRCU implementation.
Dec 16 13:44:13 nanopi user.info kernel: [    0.002941] smp: Bringing up secondary CPUs ...
Dec 16 13:44:13 nanopi user.info kernel: [    0.013702] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 13:44:13 nanopi user.info kernel: [    0.024527] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 13:44:13 nanopi user.info kernel: [    0.035286] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 13:44:13 nanopi user.info kernel: [    0.035384] smp: Brought up 1 node, 4 CPUs
Dec 16 13:44:13 nanopi user.info kernel: [    0.035412] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 13:44:13 nanopi user.info kernel: [    0.035421] CPU: All CPU(s) started in HYP mode.
Dec 16 13:44:13 nanopi user.info kernel: [    0.035427] CPU: Virtualization extensions available.
Dec 16 13:44:13 nanopi user.info kernel: [    0.036119] devtmpfs: initialized
Dec 16 13:44:13 nanopi user.info kernel: [    0.041415] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 13:44:13 nanopi user.info kernel: [    0.041613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 13:44:13 nanopi user.info kernel: [    0.041643] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.043922] pinctrl core: initialized pinctrl subsystem
Dec 16 13:44:13 nanopi user.info kernel: [    0.045089] NET: Registered protocol family 16
Dec 16 13:44:13 nanopi user.info kernel: [    0.046566] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 13:44:13 nanopi user.info kernel: [    0.047603] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 13:44:13 nanopi user.info kernel: [    0.048002] cpuidle: using governor menu
Dec 16 13:44:13 nanopi user.info kernel: [    0.048212] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 13:44:13 nanopi user.info kernel: [    0.048223] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 13:44:13 nanopi user.info kernel: [    0.065485] cryptd: max_cpu_qlen set to 1000
Dec 16 13:44:13 nanopi user.info kernel: [    0.066701] vdd-sys-3v3: supplied by vdd-5v
Dec 16 13:44:13 nanopi user.info kernel: [    0.067360] iommu: Default domain type: Translated 
Dec 16 13:44:13 nanopi user.info kernel: [    0.067600] usbcore: registered new interface driver usbfs
Dec 16 13:44:13 nanopi user.info kernel: [    0.067669] usbcore: registered new interface driver hub
Dec 16 13:44:13 nanopi user.info kernel: [    0.067719] usbcore: registered new device driver usb
Dec 16 13:44:13 nanopi user.info kernel: [    0.069159] clocksource: Switched to clocksource arch_sys_counter
Dec 16 13:44:13 nanopi user.info kernel: [    0.076623] NET: Registered protocol family 2
Dec 16 13:44:13 nanopi user.info kernel: [    0.076824] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077556] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077591] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077638] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077702] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077831] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.077893] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:44:13 nanopi user.info kernel: [    0.078049] NET: Registered protocol family 1
Dec 16 13:44:13 nanopi user.info kernel: [    0.079419] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 13:44:13 nanopi user.notice kernel: [    0.081101] Initialise system trusted keyrings
Dec 16 13:44:13 nanopi user.info kernel: [    0.081271] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 13:44:13 nanopi user.notice kernel: [    0.085310] Key type asymmetric registered
Dec 16 13:44:13 nanopi user.notice kernel: [    0.085332] Asymmetric key parser 'x509' registered
Dec 16 13:44:13 nanopi user.err kernel: [    0.086073] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 13:44:13 nanopi user.info kernel: [    0.089788] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.091730] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.096698] Serial: 8250/16550 driver, 8 ports
Dec 16 13:44:13 nanopi user.info kernel: [    0.117608] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 13:44:13 nanopi user.info kernel: [    0.700105] printk: console [ttyS0] enabled
Dec 16 13:44:13 nanopi user.info kernel: [    0.725408] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 13:44:13 nanopi user.info kernel: [    0.755255] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 13:44:13 nanopi user.info kernel: [    0.785075] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 13:44:13 nanopi user.info kernel: [    0.796135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.802693] ehci-platform: EHCI generic platform driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.808341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.814550] ohci-platform: OHCI generic platform driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.820950] i2c /dev entries driver
Dec 16 13:44:13 nanopi user.info kernel: [    0.824995] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 13:44:13 nanopi user.info kernel: [    0.830836] i2c i2c-0: using generic GPIOs for recovery
Dec 16 13:44:13 nanopi user.info kernel: [    0.837331] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 13:44:13 nanopi user.info kernel: [    0.846125] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 13:44:13 nanopi user.info kernel: [    0.852359] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T13:44:07 UTC (1671198247)
Dec 16 13:44:13 nanopi user.info kernel: [    0.861430] pca953x 0-0020: using no AI
Dec 16 13:44:13 nanopi user.info kernel: [    0.869737] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 13:44:13 nanopi user.info kernel: [    0.878181] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 13:44:13 nanopi user.info kernel: [    0.888081] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 13:44:13 nanopi user.info kernel: [    0.890158] NET: Registered protocol family 10
Dec 16 13:44:13 nanopi user.info kernel: [    0.897921] Segment Routing with IPv6
Dec 16 13:44:13 nanopi user.info kernel: [    0.901697] NET: Registered protocol family 17
Dec 16 13:44:13 nanopi user.notice kernel: [    0.906241] Registering SWP/SWPB emulation handler
Dec 16 13:44:13 nanopi user.info kernel: [    0.911804] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:44:13 nanopi user.info kernel: [    0.912953] registered taskstats version 1
Dec 16 13:44:13 nanopi user.info kernel: [    0.917883] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:44:13 nanopi user.notice kernel: [    0.929885] Loading compiled-in X.509 certificates
Dec 16 13:44:13 nanopi user.info kernel: [    0.944546] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 13:44:13 nanopi user.info kernel: [    0.990204] mmc1: new DDR MMC card at address 0001
Dec 16 13:44:13 nanopi user.info kernel: [    0.995909] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 13:44:13 nanopi user.info kernel: [    1.001090] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 13:44:13 nanopi user.notice kernel: [    1.007301] random: fast init done
Dec 16 13:44:13 nanopi user.info kernel: [    1.011063] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 13:44:13 nanopi user.info kernel: [    1.018539]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 13:44:13 nanopi user.info kernel: [    1.180062] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.185916] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 13:44:13 nanopi user.info kernel: [    1.194084] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 13:44:13 nanopi user.info kernel: [    1.229176] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:44:13 nanopi user.info kernel: [    1.235493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:44:13 nanopi user.info kernel: [    1.243782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:44:13 nanopi user.info kernel: [    1.251008] usb usb1: Product: EHCI Host Controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.255883] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:44:13 nanopi user.info kernel: [    1.262156] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 13:44:13 nanopi user.info kernel: [    1.267261] hub 1-0:1.0: USB hub found
Dec 16 13:44:13 nanopi user.info kernel: [    1.271078] hub 1-0:1.0: 1 port detected
Dec 16 13:44:13 nanopi user.info kernel: [    1.275884] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.281689] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 13:44:13 nanopi user.info kernel: [    1.289688] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 13:44:13 nanopi user.info kernel: [    1.319163] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:44:13 nanopi user.info kernel: [    1.325433] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:44:13 nanopi user.info kernel: [    1.333716] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:44:13 nanopi user.info kernel: [    1.340941] usb usb2: Product: EHCI Host Controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.345816] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:44:13 nanopi user.info kernel: [    1.352091] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 13:44:13 nanopi user.info kernel: [    1.357081] hub 2-0:1.0: USB hub found
Dec 16 13:44:13 nanopi user.info kernel: [    1.360884] hub 2-0:1.0: 1 port detected
Dec 16 13:44:13 nanopi user.info kernel: [    1.365622] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.372470] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 13:44:13 nanopi user.info kernel: [    1.380450] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 13:44:13 nanopi user.info kernel: [    1.453337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:44:13 nanopi user.info kernel: [    1.461624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:44:13 nanopi user.info kernel: [    1.468839] usb usb3: Product: Generic Platform OHCI controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.474767] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:44:13 nanopi user.info kernel: [    1.481037] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 13:44:13 nanopi user.info kernel: [    1.486021] hub 3-0:1.0: USB hub found
Dec 16 13:44:13 nanopi user.info kernel: [    1.489913] hub 3-0:1.0: 1 port detected
Dec 16 13:44:13 nanopi user.info kernel: [    1.494638] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.501578] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 13:44:13 nanopi user.info kernel: [    1.509580] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 13:44:13 nanopi user.info kernel: [    1.559180] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 13:44:13 nanopi user.info kernel: [    1.583400] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:44:13 nanopi user.info kernel: [    1.591682] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:44:13 nanopi user.info kernel: [    1.598897] usb usb4: Product: Generic Platform OHCI controller
Dec 16 13:44:13 nanopi user.info kernel: [    1.604825] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:44:13 nanopi user.info kernel: [    1.611095] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 13:44:13 nanopi user.info kernel: [    1.616094] hub 4-0:1.0: USB hub found
Dec 16 13:44:13 nanopi user.info kernel: [    1.619963] hub 4-0:1.0: 1 port detected
Dec 16 13:44:13 nanopi user.info kernel: [    1.628676] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 13:44:13 nanopi user.info kernel: [    1.641717] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 13:44:13 nanopi user.info kernel: [    1.649037] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 13:44:13 nanopi user.info kernel: [    1.673326] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 13:44:13 nanopi user.info kernel: [    1.678547] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:44:13 nanopi user.info kernel: [    1.686769] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 13:44:13 nanopi user.info kernel: [    1.694201] devtmpfs: mounted
Dec 16 13:44:13 nanopi user.info kernel: [    1.698556] Freeing unused kernel memory: 1024K
Dec 16 13:44:13 nanopi user.info kernel: [    1.719320] Run /sbin/init as init process
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723408]   with arguments:
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723413]     /sbin/init
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723417]     5
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723421]   with environment:
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723425]     HOME=/
Dec 16 13:44:13 nanopi user.debug kernel: [    1.723429]     TERM=linux
Dec 16 13:44:13 nanopi user.warn kernel: [    1.760049] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.769773] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.779350] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.788996] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.798565] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.808221] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.817789] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.827443] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.837015] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.846670] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.856241] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.865896] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.875464] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.885120] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 13:44:13 nanopi user.warn kernel: [    1.894689] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 13:44:13 nanopi user.info kernel: [    1.904902] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 13:44:13 nanopi user.info kernel: [    1.914220] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:44:13 nanopi user.info kernel: [    1.921670] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 13:44:13 nanopi user.info kernel: [    1.926458] usb 1-1: Manufacturer: Realtek
Dec 16 13:44:13 nanopi user.info kernel: [    1.930561] usb 1-1: SerialNumber: 00e04c000001
Dec 16 13:44:13 nanopi user.info kernel: [    1.935788] usb 1-1: skipping disabled interface 0
Dec 16 13:44:13 nanopi user.info kernel: [    1.940616] usb 1-1: skipping disabled interface 1
Dec 16 13:44:13 nanopi user.info kernel: [    1.969177] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:44:13 nanopi user.info kernel: [    2.049268] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:44:13 nanopi user.info kernel: [    2.263223] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 13:44:13 nanopi user.info kernel: [    2.271450] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:44:13 nanopi user.info kernel: [    2.278583] usb 3-1: Product: VE SLCAN Interface
Dec 16 13:44:13 nanopi user.info kernel: [    2.283214] usb 3-1: Manufacturer: Victron Energy
Dec 16 13:44:13 nanopi user.info kernel: [    2.287915] usb 3-1: SerialNumber: D307F4KH
Dec 16 13:44:13 nanopi user.info kernel: [    2.325337] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 13:44:13 nanopi user.info kernel: [    2.330447] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:44:13 nanopi user.info kernel: [    2.361365] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 13:44:13 nanopi user.info kernel: [    2.369634] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:44:13 nanopi user.info kernel: [    2.376831] usb 4-1: Product: FT232R USB UART
Dec 16 13:44:13 nanopi user.info kernel: [    2.381319] usb 4-1: Manufacturer: FTDI
Dec 16 13:44:13 nanopi user.info kernel: [    2.385170] usb 4-1: SerialNumber: AG0KG587
Dec 16 13:44:13 nanopi daemon.info kernel: [    2.464938] udevd[133]: starting version 3.2.9
Dec 16 13:44:13 nanopi user.notice kernel: [    2.481711] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:44:13 nanopi user.notice kernel: [    2.488757] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:44:13 nanopi user.notice kernel: [    2.495312] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:44:13 nanopi daemon.info kernel: [    2.525086] udevd[134]: starting eudev-3.2.9
Dec 16 13:44:13 nanopi user.warn kernel: [    2.672337] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 13:44:13 nanopi user.info kernel: [    2.674186] usbcore: registered new interface driver usbserial_generic
Dec 16 13:44:13 nanopi user.info kernel: [    2.686286] usbserial: USB Serial support registered for generic
Dec 16 13:44:13 nanopi user.notice kernel: [    2.710538] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 13:44:13 nanopi user.info kernel: [    2.737897] usbcore: registered new interface driver ftdi_sio
Dec 16 13:44:13 nanopi user.info kernel: [    2.744071] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 13:44:13 nanopi user.info kernel: [    2.751917] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:44:13 nanopi user.notice kernel: [    2.756375] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 13:44:13 nanopi user.info kernel: [    2.758985] usb 3-1: Detected FT-X
Dec 16 13:44:13 nanopi user.info kernel: [    2.776136] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 13:44:13 nanopi user.info kernel: [    2.784157] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:44:13 nanopi user.info kernel: [    2.791370] usb 4-1: Detected FT232RL
Dec 16 13:44:13 nanopi user.info kernel: [    2.804760] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 13:44:13 nanopi user.info kernel: [    2.818078] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 13:44:13 nanopi user.info kernel: [    2.824746] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 13:44:13 nanopi user.warn kernel: [    2.826335] 8723bu: loading out-of-tree module taints kernel.
Dec 16 13:44:13 nanopi user.info kernel: [    2.831266] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 13:44:13 nanopi user.info kernel: [    2.843431] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 13:44:13 nanopi user.info kernel: [    2.852581] lima 1c40000.gpu: bus rate = 200000000
Dec 16 13:44:13 nanopi user.info kernel: [    2.857592] lima 1c40000.gpu: mod rate = 297000000
Dec 16 13:44:13 nanopi user.err kernel: [    2.862736] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 13:44:13 nanopi user.info kernel: [    2.875814] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 13:44:13 nanopi user.info kernel: [    2.882358] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 13:44:13 nanopi user.info kernel: [    2.888466] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 13:44:13 nanopi user.info kernel: [    2.889104] lima 1c40000.gpu: Failed to register cooling device
Dec 16 13:44:13 nanopi user.info kernel: [    2.894383] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 13:44:13 nanopi user.info kernel: [    2.902359] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 13:44:13 nanopi user.warn kernel: [    2.906114] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 13:44:13 nanopi user.info kernel: [    2.923183] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 13:44:13 nanopi user.info kernel: [    2.930548] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 13:44:13 nanopi user.info kernel: [    2.937854] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 13:44:13 nanopi user.info kernel: [    2.941153] CAN device driver interface
Dec 16 13:44:13 nanopi user.info kernel: [    2.943004] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 13:44:13 nanopi user.info kernel: [    2.952390] slcan: serial line CAN interface driver
Dec 16 13:44:13 nanopi user.info kernel: [    2.953652] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 13:44:13 nanopi user.info kernel: [    2.958484] slcan: 10 dynamic interface channels.
Dec 16 13:44:13 nanopi user.info kernel: [    2.964246] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 13:44:13 nanopi user.info kernel: [    2.967269] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 13:44:13 nanopi user.info kernel: [    2.979982] can0: renamed from slcan0
Dec 16 13:44:13 nanopi user.info kernel: [    2.981829] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 13:44:13 nanopi user.info kernel: [    2.991119] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 13:44:13 nanopi user.info kernel: [    3.205116] usbcore: registered new interface driver rtl8723bu
Dec 16 13:44:13 nanopi user.info kernel: [    3.235928] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 13:44:13 nanopi user.info kernel: [    3.309680] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 13:44:13 nanopi user.info kernel: [    3.452683] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 13:44:13 nanopi user.warn kernel: [    4.221954] urandom_read: 4 callbacks suppressed
Dec 16 13:44:13 nanopi user.notice kernel: [    4.221966] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 13:44:13 nanopi user.notice kernel: [    4.301850] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 13:44:13 nanopi user.crit kernel: [    4.884981] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:44:13 nanopi user.notice kernel: [    6.893013] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 13:44:13 nanopi user.info kernel: [    7.091017] Bluetooth: Core ver 2.22
Dec 16 13:44:13 nanopi user.info kernel: [    7.094837] NET: Registered protocol family 31
Dec 16 13:44:13 nanopi user.info kernel: [    7.099419] Bluetooth: HCI device and connection manager initialized
Dec 16 13:44:13 nanopi user.info kernel: [    7.105814] Bluetooth: HCI socket layer initialized
Dec 16 13:44:13 nanopi user.info kernel: [    7.110798] Bluetooth: L2CAP socket layer initialized
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Successfully dropped root privileges.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: avahi-daemon 0.7 starting up.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Successfully called chroot().
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Successfully dropped remaining capabilities.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Loading service file /services/garmin.service.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Loading service file /services/raymarine.service.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Network interface enumeration completed.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Server startup complete. Host name is venus.local. Local service cookie is 4008196008.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Connection Manager version 1.33
Dec 16 13:44:13 nanopi daemon.err connmand[615]: iptables support missing error 2 (No such file or directory)
Dec 16 13:44:13 nanopi daemon.warn connmand[615]: Failed to flush table 'mangle': Invalid argument
Dec 16 13:44:13 nanopi daemon.err connmand[615]: iptables support missing error 2 (No such file or directory)
Dec 16 13:44:13 nanopi daemon.warn connmand[615]: Failed to flush table 'nat': Invalid argument
Dec 16 13:44:13 nanopi daemon.err connmand[615]: iptables support missing error 2 (No such file or directory)
Dec 16 13:44:13 nanopi daemon.warn connmand[615]: Failed to install iptables rules: Invalid argument
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Checking loopback interface settings
Dec 16 13:44:13 nanopi daemon.info connmand[615]: System hostname is nanopi
Dec 16 13:44:13 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 13:44:13 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully called chroot().
Dec 16 13:44:13 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully dropped root privileges.
Dec 16 13:44:13 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Starting with address 169.254.6.54
Dec 16 13:44:13 nanopi daemon.info dbus-daemon[552]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=615 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {update} flags 4098 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi user.info kernel: [    7.731176] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 13:44:13 nanopi user.info kernel: [    7.746350] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 13:44:13 nanopi user.info kernel: [    7.754075] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 13:44:13 nanopi user.warn kernel: [    7.761859] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Adding interface eth0 [ ethernet ]
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 13:44:13 nanopi user.info kernel: [    7.785479] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 13:44:13 nanopi user.info kernel: [    7.795767] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 address C6:6A:7B:2E:25:8B mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 address C6:6A:7B:2E:25:8B mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 13:44:13 nanopi daemon.info connmand[615]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 13:44:13 nanopi cron.info crond[692]: (CRON) STARTUP (1.5.5)
Dec 16 13:44:13 nanopi cron.info crond[692]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 13:44:13 nanopi cron.info crond[692]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 13% if used.)
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:44:13 nanopi daemon.info connmand[615]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {update} flags 4098 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Adding interface wifi0 [ wifi ]
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {update} flags 4099 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Ignoring interface ap0 (filtered)
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Adding interface ap0 [ wifi ]
Dec 16 13:44:13 nanopi user.info kernel: [    7.805977] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 address C6:6A:7B:2E:25:8B mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {update} flags 4099 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 address C6:6A:7B:2E:25:8B mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:44:13 nanopi daemon.info dbus-daemon[552]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 13:44:13 nanopi daemon.notice wpa_supplicant[678]: Successfully initialized wpa_supplicant
Dec 16 13:44:13 nanopi daemon.warn connmand[615]: Skipping disconnect of carrier, network is connecting.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 13:44:13 nanopi daemon.info avahi-daemon[589]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 13:44:13 nanopi daemon.info connmand[615]: Setting domainname to hwhb.co.uk
Dec 16 13:44:13 nanopi user.notice kernel: [    8.022347] random: crng init done
Dec 16 13:44:13 nanopi daemon.info dnsmasq[567]: started, version 2.83 cachesize 150
Dec 16 13:44:13 nanopi daemon.warn dnsmasq[567]: overflow: 3 log entries lost
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 address C6:6A:7B:2E:25:8B mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {update} flags 36867 <UP>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:44:13 nanopi daemon.info connmand[615]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:44:14 nanopi user.warn wpa_supplicant[678]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 13:44:14 nanopi daemon.notice wpa_supplicant[678]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:44:14 nanopi daemon.notice wpa_supplicant[678]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:44:14 nanopi user.info kernel: [    8.503265] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 13:44:14 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 13:44:14 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 13:44:14 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00354
Dec 16 13:44:14 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 13:44:14 nanopi daemon.err connmand[615]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 13:44:14 nanopi daemon.info connmand[615]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:44:15 nanopi daemon.info avahi-daemon[589]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:44:15 nanopi daemon.info avahi-daemon[589]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 13:44:15 nanopi daemon.info avahi-daemon[589]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:44:15 nanopi daemon.info connmand[615]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:44:15 nanopi daemon.info connmand[615]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:44:15 nanopi daemon.info dnsmasq[567]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 13:44:15 nanopi daemon.info dnsmasq[567]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 13:44:16 nanopi daemon.info connmand[615]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 13:44:16 nanopi daemon.info avahi-daemon[589]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:44:16 nanopi daemon.info avahi-daemon[589]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:44:16 nanopi daemon.info avahi-daemon[589]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:44:16 nanopi daemon.info avahi-daemon[589]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 13:44:16 nanopi daemon.err connmand[615]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:44:18 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Callout BIND, address 169.254.6.54 on interface ll-eth0
Dec 16 13:44:18 nanopi daemon.info connmand[615]: ll-eth0 {add} address 2001:8b0:1552:697c:c46a:7bff:fe2e:258b/64 label (null) family 10
Dec 16 13:44:18 nanopi daemon.info connmand[615]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:44:18 nanopi daemon.info connmand[615]: ll-eth0 {add} address 169.254.6.54/16 label ll-eth0 family 2
Dec 16 13:44:18 nanopi daemon.info connmand[615]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:44:18 nanopi user.info kernel: [   12.857690] can: controller area network core
Dec 16 13:44:18 nanopi user.info kernel: [   12.862516] NET: Registered protocol family 29
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:44:18 nanopi daemon.info connmand[615]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 13:44:18 nanopi user.info kernel: [   12.976676] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 13:44:19 nanopi user.info kernel: [   13.621383] can: raw protocol
Dec 16 13:44:20 nanopi daemon.info avahi-daemon[589]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:44:20 nanopi daemon.info avahi-daemon[589]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 13:44:20 nanopi daemon.info avahi-daemon[589]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 13:44:20 nanopi daemon.info connmand[615]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:44:20 nanopi daemon.info connmand[615]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:44:20 nanopi daemon.info connmand[615]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:44:20 nanopi daemon.info connmand[615]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 13:44:20 nanopi daemon.info connmand[615]: Ignoring interface ap0 (filtered)
Dec 16 13:44:20 nanopi user.info kernel: [   14.737860] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 13:44:22 nanopi daemon.info avahi-daemon[589]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:44:22 nanopi daemon.info avahi-daemon[589]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 13:44:22 nanopi daemon.info avahi-daemon[589]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 13:44:22 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully claimed IP address 169.254.6.54
Dec 16 13:44:30 nanopi user.info kernel: [   24.244283] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:44:30 nanopi authpriv.notice login[1647]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 13:44:49 nanopi daemon.info connmand[615]: ntp: time slew +0.984908 s
Dec 16 13:45:06 nanopi daemon.info connmand[615]: ntp: time slew -0.000650 s
Dec 16 13:45:22 nanopi daemon.info connmand[615]: ntp: time slew -0.000774 s
Dec 16 13:45:38 nanopi daemon.info connmand[615]: ntp: time slew -0.000396 s
Dec 16 13:45:54 nanopi daemon.info connmand[615]: ntp: time slew -0.001113 s
Dec 16 13:46:10 nanopi daemon.info connmand[615]: ntp: time slew -0.000889 s
Dec 16 13:46:26 nanopi daemon.info connmand[615]: ntp: time slew -0.000875 s
Dec 16 13:46:29 nanopi daemon.err connmand[615]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:46:42 nanopi daemon.info connmand[615]: ntp: time slew -0.000816 s
Dec 16 13:46:58 nanopi daemon.info connmand[615]: ntp: time slew -0.000596 s
Dec 16 13:47:14 nanopi daemon.info connmand[615]: ntp: time slew -0.000624 s
Dec 16 13:47:30 nanopi daemon.info connmand[615]: ntp: time slew -0.000943 s
Dec 16 13:47:46 nanopi daemon.info connmand[615]: ntp: time slew -0.000726 s
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 13:48:20 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 13:48:20 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 13:48:20 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 13:48:20 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 13:48:20 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 13:48:20 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 13:48:20 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 13:48:20 nanopi user.info kernel: [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 13:48:20 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 13:48:20 nanopi user.info kernel: [    0.000216] Console: colour dummy device 80x30
Dec 16 13:48:20 nanopi user.info kernel: [    0.000285] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000306] pid_max: default: 32768 minimum: 301
Dec 16 13:48:20 nanopi user.info kernel: [    0.000442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.000459] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.001167] CPU: Testing write buffer coherency: ok
Dec 16 13:48:20 nanopi user.err kernel: [    0.001514] /cpus/cpu@0 missing clock-frequency property
Dec 16 13:48:20 nanopi user.err kernel: [    0.001538] /cpus/cpu@1 missing clock-frequency property
Dec 16 13:48:20 nanopi user.err kernel: [    0.001557] /cpus/cpu@2 missing clock-frequency property
Dec 16 13:48:20 nanopi user.err kernel: [    0.001577] /cpus/cpu@3 missing clock-frequency property
Dec 16 13:48:20 nanopi user.info kernel: [    0.001590] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 13:48:20 nanopi user.info kernel: [    0.002184] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 13:48:20 nanopi user.info kernel: [    0.002308] rcu: Hierarchical SRCU implementation.
Dec 16 13:48:20 nanopi user.info kernel: [    0.002944] smp: Bringing up secondary CPUs ...
Dec 16 13:48:20 nanopi user.info kernel: [    0.013693] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 13:48:20 nanopi user.info kernel: [    0.024506] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 13:48:20 nanopi user.info kernel: [    0.035261] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 13:48:20 nanopi user.info kernel: [    0.035356] smp: Brought up 1 node, 4 CPUs
Dec 16 13:48:20 nanopi user.info kernel: [    0.035386] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 13:48:20 nanopi user.info kernel: [    0.035394] CPU: All CPU(s) started in HYP mode.
Dec 16 13:48:20 nanopi user.info kernel: [    0.035400] CPU: Virtualization extensions available.
Dec 16 13:48:20 nanopi user.info kernel: [    0.036097] devtmpfs: initialized
Dec 16 13:48:20 nanopi user.info kernel: [    0.041399] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 13:48:20 nanopi user.info kernel: [    0.041603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 13:48:20 nanopi user.info kernel: [    0.041632] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.043923] pinctrl core: initialized pinctrl subsystem
Dec 16 13:48:20 nanopi user.info kernel: [    0.045093] NET: Registered protocol family 16
Dec 16 13:48:20 nanopi user.info kernel: [    0.046560] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 13:48:20 nanopi user.info kernel: [    0.047592] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 13:48:20 nanopi user.info kernel: [    0.047989] cpuidle: using governor menu
Dec 16 13:48:20 nanopi user.info kernel: [    0.048194] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 13:48:20 nanopi user.info kernel: [    0.048206] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 13:48:20 nanopi user.info kernel: [    0.065457] cryptd: max_cpu_qlen set to 1000
Dec 16 13:48:20 nanopi user.info kernel: [    0.066669] vdd-sys-3v3: supplied by vdd-5v
Dec 16 13:48:20 nanopi user.info kernel: [    0.067341] iommu: Default domain type: Translated 
Dec 16 13:48:20 nanopi user.info kernel: [    0.067583] usbcore: registered new interface driver usbfs
Dec 16 13:48:20 nanopi user.info kernel: [    0.067652] usbcore: registered new interface driver hub
Dec 16 13:48:20 nanopi user.info kernel: [    0.067700] usbcore: registered new device driver usb
Dec 16 13:48:20 nanopi user.info kernel: [    0.069137] clocksource: Switched to clocksource arch_sys_counter
Dec 16 13:48:20 nanopi user.info kernel: [    0.076618] NET: Registered protocol family 2
Dec 16 13:48:20 nanopi user.info kernel: [    0.076818] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077521] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077556] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077601] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077666] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077796] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.077846] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:48:20 nanopi user.info kernel: [    0.078004] NET: Registered protocol family 1
Dec 16 13:48:20 nanopi user.info kernel: [    0.079333] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 13:48:20 nanopi user.notice kernel: [    0.081118] Initialise system trusted keyrings
Dec 16 13:48:20 nanopi user.info kernel: [    0.081314] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 13:48:20 nanopi user.notice kernel: [    0.085377] Key type asymmetric registered
Dec 16 13:48:20 nanopi user.notice kernel: [    0.085398] Asymmetric key parser 'x509' registered
Dec 16 13:48:20 nanopi user.err kernel: [    0.086142] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 13:48:20 nanopi user.info kernel: [    0.089872] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.091764] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.096647] Serial: 8250/16550 driver, 8 ports
Dec 16 13:48:20 nanopi user.info kernel: [    0.117423] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
Dec 16 13:48:20 nanopi user.info kernel: [    0.700224] printk: console [ttyS0] enabled
Dec 16 13:48:20 nanopi user.info kernel: [    0.725476] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 13:48:20 nanopi user.info kernel: [    0.755300] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 13:48:20 nanopi user.info kernel: [    0.785071] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 13:48:20 nanopi user.info kernel: [    0.796058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.802614] ehci-platform: EHCI generic platform driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.808242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.814452] ohci-platform: OHCI generic platform driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.820875] i2c /dev entries driver
Dec 16 13:48:20 nanopi user.info kernel: [    0.824916] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 13:48:20 nanopi user.info kernel: [    0.830759] i2c i2c-0: using generic GPIOs for recovery
Dec 16 13:48:20 nanopi user.info kernel: [    0.837256] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 13:48:20 nanopi user.info kernel: [    0.846063] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 13:48:20 nanopi user.info kernel: [    0.852302] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T13:48:14 UTC (1671198494)
Dec 16 13:48:20 nanopi user.info kernel: [    0.861389] pca953x 0-0020: using no AI
Dec 16 13:48:20 nanopi user.info kernel: [    0.869640] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 13:48:20 nanopi user.info kernel: [    0.878124] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 13:48:20 nanopi user.info kernel: [    0.888100] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 13:48:20 nanopi user.info kernel: [    0.890090] NET: Registered protocol family 10
Dec 16 13:48:20 nanopi user.info kernel: [    0.897900] Segment Routing with IPv6
Dec 16 13:48:20 nanopi user.info kernel: [    0.901691] NET: Registered protocol family 17
Dec 16 13:48:20 nanopi user.notice kernel: [    0.906236] Registering SWP/SWPB emulation handler
Dec 16 13:48:20 nanopi user.info kernel: [    0.912883] registered taskstats version 1
Dec 16 13:48:20 nanopi user.info kernel: [    0.913378] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:48:20 nanopi user.notice kernel: [    0.916997] Loading compiled-in X.509 certificates
Dec 16 13:48:20 nanopi user.info kernel: [    0.917915] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:48:20 nanopi user.info kernel: [    0.945809] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 13:48:20 nanopi user.notice kernel: [    1.009399] random: fast init done
Dec 16 13:48:20 nanopi user.info kernel: [    1.012854] mmc1: new DDR MMC card at address 0001
Dec 16 13:48:20 nanopi user.info kernel: [    1.018575] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 13:48:20 nanopi user.info kernel: [    1.023659] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 13:48:20 nanopi user.info kernel: [    1.030122] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 13:48:20 nanopi user.info kernel: [    1.037487]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 13:48:20 nanopi user.info kernel: [    1.160236] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.166131] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 13:48:20 nanopi user.info kernel: [    1.174291] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 13:48:20 nanopi user.info kernel: [    1.209153] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:48:20 nanopi user.info kernel: [    1.215478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:48:20 nanopi user.info kernel: [    1.223769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:48:20 nanopi user.info kernel: [    1.230995] usb usb1: Product: EHCI Host Controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.235870] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:48:20 nanopi user.info kernel: [    1.242143] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 13:48:20 nanopi user.info kernel: [    1.247189] hub 1-0:1.0: USB hub found
Dec 16 13:48:20 nanopi user.info kernel: [    1.251024] hub 1-0:1.0: 1 port detected
Dec 16 13:48:20 nanopi user.info kernel: [    1.255799] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.261663] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 13:48:20 nanopi user.info kernel: [    1.269684] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 13:48:20 nanopi user.info kernel: [    1.299142] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:48:20 nanopi user.info kernel: [    1.305410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:48:20 nanopi user.info kernel: [    1.313689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:48:20 nanopi user.info kernel: [    1.320914] usb usb2: Product: EHCI Host Controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.325789] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:48:20 nanopi user.info kernel: [    1.332071] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 13:48:20 nanopi user.info kernel: [    1.337057] hub 2-0:1.0: USB hub found
Dec 16 13:48:20 nanopi user.info kernel: [    1.340875] hub 2-0:1.0: 1 port detected
Dec 16 13:48:20 nanopi user.info kernel: [    1.345617] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.352550] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 13:48:20 nanopi user.info kernel: [    1.360539] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 13:48:20 nanopi user.info kernel: [    1.433317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:48:20 nanopi user.info kernel: [    1.441608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:48:20 nanopi user.info kernel: [    1.448823] usb usb3: Product: Generic Platform OHCI controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.454752] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:48:20 nanopi user.info kernel: [    1.461022] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 13:48:20 nanopi user.info kernel: [    1.466003] hub 3-0:1.0: USB hub found
Dec 16 13:48:20 nanopi user.info kernel: [    1.469904] hub 3-0:1.0: 1 port detected
Dec 16 13:48:20 nanopi user.info kernel: [    1.474605] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.481588] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 13:48:20 nanopi user.info kernel: [    1.489604] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 13:48:20 nanopi user.info kernel: [    1.539148] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 13:48:20 nanopi user.info kernel: [    1.563373] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:48:20 nanopi user.info kernel: [    1.571650] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:48:20 nanopi user.info kernel: [    1.578865] usb usb4: Product: Generic Platform OHCI controller
Dec 16 13:48:20 nanopi user.info kernel: [    1.584789] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:48:20 nanopi user.info kernel: [    1.591062] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 13:48:20 nanopi user.info kernel: [    1.596082] hub 4-0:1.0: USB hub found
Dec 16 13:48:20 nanopi user.info kernel: [    1.599978] hub 4-0:1.0: 1 port detected
Dec 16 13:48:20 nanopi user.info kernel: [    1.608730] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 13:48:20 nanopi user.info kernel: [    1.621910] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 13:48:20 nanopi user.info kernel: [    1.629259] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 13:48:20 nanopi user.info kernel: [    1.645207] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 13:48:20 nanopi user.info kernel: [    1.650460] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:48:20 nanopi user.info kernel: [    1.658635] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 13:48:20 nanopi user.info kernel: [    1.666036] devtmpfs: mounted
Dec 16 13:48:20 nanopi user.info kernel: [    1.670431] Freeing unused kernel memory: 1024K
Dec 16 13:48:20 nanopi user.info kernel: [    1.675130] Run /sbin/init as init process
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679249]   with arguments:
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679255]     /sbin/init
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679259]     5
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679262]   with environment:
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679267]     HOME=/
Dec 16 13:48:20 nanopi user.debug kernel: [    1.679271]     TERM=linux
Dec 16 13:48:20 nanopi user.warn kernel: [    1.740016] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.749733] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.759317] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.768982] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.768994] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.788223] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.797820] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.807716] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.817297] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.826953] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.836551] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.846213] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.855799] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.865456] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 13:48:20 nanopi user.warn kernel: [    1.875025] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 13:48:20 nanopi user.info kernel: [    1.884872] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:48:20 nanopi user.info kernel: [    1.892496] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 13:48:20 nanopi user.info kernel: [    1.900737] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:48:20 nanopi user.info kernel: [    1.907893] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 13:48:20 nanopi user.info kernel: [    1.912702] usb 1-1: Manufacturer: Realtek
Dec 16 13:48:20 nanopi user.info kernel: [    1.916801] usb 1-1: SerialNumber: 00e04c000001
Dec 16 13:48:20 nanopi user.info kernel: [    1.922034] usb 1-1: skipping disabled interface 0
Dec 16 13:48:20 nanopi user.info kernel: [    1.926896] usb 1-1: skipping disabled interface 1
Dec 16 13:48:20 nanopi user.info kernel: [    2.039270] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:48:20 nanopi user.info kernel: [    2.193210] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 13:48:20 nanopi user.info kernel: [    2.201456] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:48:20 nanopi user.info kernel: [    2.208601] usb 3-1: Product: VE SLCAN Interface
Dec 16 13:48:20 nanopi user.info kernel: [    2.213245] usb 3-1: Manufacturer: Victron Energy
Dec 16 13:48:20 nanopi user.info kernel: [    2.217957] usb 3-1: SerialNumber: D307F4KH
Dec 16 13:48:20 nanopi user.info kernel: [    2.286321] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 13:48:20 nanopi user.info kernel: [    2.291419] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:48:20 nanopi user.info kernel: [    2.331360] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 13:48:20 nanopi user.info kernel: [    2.339646] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:48:20 nanopi user.info kernel: [    2.346872] usb 4-1: Product: FT232R USB UART
Dec 16 13:48:20 nanopi user.info kernel: [    2.351288] usb 4-1: Manufacturer: FTDI
Dec 16 13:48:20 nanopi user.info kernel: [    2.355146] usb 4-1: SerialNumber: AG0KG587
Dec 16 13:48:20 nanopi daemon.info kernel: [    2.446698] udevd[130]: starting version 3.2.9
Dec 16 13:48:20 nanopi user.notice kernel: [    2.463345] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:48:20 nanopi user.notice kernel: [    2.470434] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:48:20 nanopi user.notice kernel: [    2.476955] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:48:20 nanopi daemon.info kernel: [    2.507524] udevd[131]: starting eudev-3.2.9
Dec 16 13:48:20 nanopi user.info kernel: [    2.662270] usbcore: registered new interface driver usbserial_generic
Dec 16 13:48:20 nanopi user.info kernel: [    2.669104] usbserial: USB Serial support registered for generic
Dec 16 13:48:20 nanopi user.warn kernel: [    2.678995] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 13:48:20 nanopi user.info kernel: [    2.706758] usbcore: registered new interface driver ftdi_sio
Dec 16 13:48:20 nanopi user.info kernel: [    2.712910] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 13:48:20 nanopi user.info kernel: [    2.720626] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:48:20 nanopi user.info kernel: [    2.731181] usb 3-1: Detected FT-X
Dec 16 13:48:20 nanopi user.info kernel: [    2.746901] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 13:48:20 nanopi user.notice kernel: [    2.751515] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 13:48:20 nanopi user.info kernel: [    2.754677] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:48:20 nanopi user.info kernel: [    2.766472] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 13:48:20 nanopi user.info kernel: [    2.768785] usb 4-1: Detected FT232RL
Dec 16 13:48:20 nanopi user.info kernel: [    2.775052] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 13:48:20 nanopi user.info kernel: [    2.784826] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 13:48:20 nanopi user.notice kernel: [    2.785336] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 13:48:20 nanopi user.info kernel: [    2.788666] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 13:48:20 nanopi user.info kernel: [    2.790719] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 13:48:20 nanopi user.warn kernel: [    2.810302] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 13:48:20 nanopi user.info kernel: [    2.820221] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 13:48:20 nanopi user.info kernel: [    2.820569] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 13:48:20 nanopi user.info kernel: [    2.827508] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 13:48:20 nanopi user.info kernel: [    2.827529] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 13:48:20 nanopi user.info kernel: [    2.827537] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 13:48:20 nanopi user.info kernel: [    2.827546] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 13:48:20 nanopi user.info kernel: [    2.827553] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 13:48:20 nanopi user.warn kernel: [    2.829284] 8723bu: loading out-of-tree module taints kernel.
Dec 16 13:48:20 nanopi user.info kernel: [    2.830583] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 13:48:20 nanopi user.info kernel: [    2.831404] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 13:48:20 nanopi user.info kernel: [    2.831419] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 13:48:20 nanopi user.info kernel: [    2.834063] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 13:48:20 nanopi user.info kernel: [    2.894567] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 13:48:20 nanopi user.info kernel: [    2.900897] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 13:48:20 nanopi user.info kernel: [    2.914287] lima 1c40000.gpu: bus rate = 200000000
Dec 16 13:48:20 nanopi user.info kernel: [    2.919353] lima 1c40000.gpu: mod rate = 297000000
Dec 16 13:48:20 nanopi user.err kernel: [    2.924374] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 13:48:20 nanopi user.info kernel: [    2.942988] lima 1c40000.gpu: Failed to register cooling device
Dec 16 13:48:20 nanopi user.info kernel: [    2.952029] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 13:48:20 nanopi user.info kernel: [    2.991002] CAN device driver interface
Dec 16 13:48:20 nanopi user.info kernel: [    2.998904] slcan: serial line CAN interface driver
Dec 16 13:48:20 nanopi user.info kernel: [    3.003967] slcan: 10 dynamic interface channels.
Dec 16 13:48:20 nanopi user.info kernel: [    3.025335] can0: renamed from slcan0
Dec 16 13:48:20 nanopi user.info kernel: [    3.243063] usbcore: registered new interface driver rtl8723bu
Dec 16 13:48:20 nanopi user.info kernel: [    3.273314] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 13:48:20 nanopi user.info kernel: [    3.319750] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 13:48:20 nanopi user.info kernel: [    3.442610] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 13:48:20 nanopi user.warn kernel: [    4.210318] urandom_read: 4 callbacks suppressed
Dec 16 13:48:20 nanopi user.notice kernel: [    4.210330] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 13:48:20 nanopi user.notice kernel: [    4.289417] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 13:48:20 nanopi user.crit kernel: [    4.875558] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:48:20 nanopi user.notice kernel: [    6.762799] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 13:48:20 nanopi user.info kernel: [    6.962409] Bluetooth: Core ver 2.22
Dec 16 13:48:20 nanopi user.info kernel: [    6.966261] NET: Registered protocol family 31
Dec 16 13:48:20 nanopi user.info kernel: [    6.970827] Bluetooth: HCI device and connection manager initialized
Dec 16 13:48:20 nanopi user.info kernel: [    6.977219] Bluetooth: HCI socket layer initialized
Dec 16 13:48:20 nanopi user.info kernel: [    6.982179] Bluetooth: L2CAP socket layer initialized
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Successfully dropped root privileges.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: avahi-daemon 0.7 starting up.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Successfully called chroot().
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Successfully dropped remaining capabilities.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Loading service file /services/garmin.service.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Loading service file /services/raymarine.service.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Network interface enumeration completed.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Server startup complete. Host name is venus.local. Local service cookie is 1750199326.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Connection Manager version 1.33
Dec 16 13:48:20 nanopi daemon.err connmand[610]: iptables support missing error 2 (No such file or directory)
Dec 16 13:48:20 nanopi daemon.warn connmand[610]: Failed to flush table 'mangle': Invalid argument
Dec 16 13:48:20 nanopi daemon.err connmand[610]: iptables support missing error 2 (No such file or directory)
Dec 16 13:48:20 nanopi daemon.warn connmand[610]: Failed to flush table 'nat': Invalid argument
Dec 16 13:48:20 nanopi daemon.err connmand[610]: iptables support missing error 2 (No such file or directory)
Dec 16 13:48:20 nanopi daemon.warn connmand[610]: Failed to install iptables rules: Invalid argument
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Checking loopback interface settings
Dec 16 13:48:20 nanopi daemon.info connmand[610]: System hostname is nanopi
Dec 16 13:48:20 nanopi daemon.info dbus-daemon[546]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=610 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {update} flags 4098 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 13:48:20 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully called chroot().
Dec 16 13:48:20 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully dropped root privileges.
Dec 16 13:48:20 nanopi user.info kernel: [    7.591447] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 13:48:20 nanopi user.info kernel: [    7.611587] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 13:48:20 nanopi user.info kernel: [    7.618979] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 13:48:20 nanopi user.warn kernel: [    7.626849] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 13:48:20 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Starting with address 169.254.8.60
Dec 16 13:48:20 nanopi user.info kernel: [    7.642675] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 13:48:20 nanopi user.info kernel: [    7.653168] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Adding interface eth0 [ ethernet ]
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 address 72:B1:E1:D6:44:3E mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 13:48:20 nanopi daemon.info connmand[610]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:48:20 nanopi daemon.info connmand[610]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 address 72:B1:E1:D6:44:3E mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {update} flags 4098 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Adding interface wifi0 [ wifi ]
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {update} flags 4099 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Ignoring interface ap0 (filtered)
Dec 16 13:48:20 nanopi user.info kernel: [    7.662268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Adding interface ap0 [ wifi ]
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 address 72:B1:E1:D6:44:3E mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {update} flags 4099 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 address 72:B1:E1:D6:44:3E mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:48:20 nanopi cron.info crond[685]: (CRON) STARTUP (1.5.5)
Dec 16 13:48:20 nanopi cron.info crond[685]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 13:48:20 nanopi cron.info crond[685]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 76% if used.)
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:48:20 nanopi daemon.warn connmand[610]: Skipping disconnect of carrier, network is connecting.
Dec 16 13:48:20 nanopi daemon.info dbus-daemon[546]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 13:48:20 nanopi daemon.notice wpa_supplicant[667]: Successfully initialized wpa_supplicant
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 13:48:20 nanopi daemon.info avahi-daemon[584]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 13:48:20 nanopi daemon.info connmand[610]: Setting domainname to hwhb.co.uk
Dec 16 13:48:20 nanopi daemon.info dnsmasq[562]: started, version 2.83 cachesize 150
Dec 16 13:48:20 nanopi daemon.warn dnsmasq[562]: overflow: 3 log entries lost
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {RX} 0 packets 0 bytes
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {TX} 1 packets 90 bytes
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 address 72:B1:E1:D6:44:3E mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {update} flags 36867 <UP>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:48:20 nanopi daemon.info connmand[610]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:48:21 nanopi user.warn wpa_supplicant[667]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 13:48:21 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:48:21 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:48:21 nanopi user.notice kernel: [    8.045280] random: crng init done
Dec 16 13:48:21 nanopi daemon.err connmand[610]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 13:48:21 nanopi daemon.info connmand[610]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:48:21 nanopi user.info kernel: [    8.351291] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 13:48:21 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 13:48:21 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 13:48:21 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.00247
Dec 16 13:48:21 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 13:48:22 nanopi daemon.info connmand[610]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:48:22 nanopi daemon.info connmand[610]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:48:22 nanopi daemon.info avahi-daemon[584]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:48:22 nanopi daemon.info avahi-daemon[584]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 13:48:22 nanopi daemon.info avahi-daemon[584]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:48:22 nanopi daemon.info dnsmasq[562]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 13:48:22 nanopi daemon.info dnsmasq[562]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 13:48:23 nanopi daemon.info connmand[610]: ll-eth0 {add} address 2001:8b0:1552:697c:70b1:e1ff:fed6:443e/64 label (null) family 10
Dec 16 13:48:25 nanopi daemon.info avahi-daemon[584]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:48:25 nanopi daemon.info avahi-daemon[584]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:48:25 nanopi daemon.info avahi-daemon[584]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:48:25 nanopi daemon.info connmand[610]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 13:48:25 nanopi daemon.info avahi-daemon[584]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 13:48:26 nanopi daemon.err connmand[610]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:48:26 nanopi user.info kernel: [   13.059044] can: controller area network core
Dec 16 13:48:26 nanopi user.info kernel: [   13.063924] NET: Registered protocol family 29
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:48:26 nanopi daemon.info connmand[610]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 13:48:26 nanopi user.info kernel: [   13.240452] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 13:48:26 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Callout BIND, address 169.254.8.60 on interface ll-eth0
Dec 16 13:48:26 nanopi user.info kernel: [   13.960438] can: raw protocol
Dec 16 13:48:27 nanopi daemon.info connmand[610]: ll-eth0 {add} address 169.254.8.60/16 label ll-eth0 family 2
Dec 16 13:48:27 nanopi daemon.info connmand[610]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:48:28 nanopi daemon.info connmand[610]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:48:28 nanopi daemon.info avahi-daemon[584]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:48:28 nanopi daemon.info avahi-daemon[584]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 13:48:28 nanopi daemon.info connmand[610]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:48:28 nanopi daemon.info connmand[610]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:48:28 nanopi daemon.info avahi-daemon[584]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 13:48:28 nanopi daemon.info connmand[610]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 13:48:28 nanopi daemon.info connmand[610]: Ignoring interface ap0 (filtered)
Dec 16 13:48:28 nanopi user.info kernel: [   15.152777] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 13:48:29 nanopi daemon.info avahi-daemon[584]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:48:29 nanopi daemon.info avahi-daemon[584]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 13:48:29 nanopi daemon.info avahi-daemon[584]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 13:48:30 nanopi daemon.info avahi-autoipd(ll-eth0)[661]: Successfully claimed IP address 169.254.8.60
Dec 16 13:48:36 nanopi user.info kernel: [   23.632354] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:48:37 nanopi authpriv.notice login[1643]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 13:48:53 nanopi daemon.info connmand[610]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:49:24 nanopi daemon.info connmand[610]: ntp: time slew +0.474415 s
Dec 16 13:50:41 nanopi daemon.err connmand[610]: Failed to find URL:http://ipv6.connman.net/online/status.html
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 13:51:48 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 13:51:48 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 13:51:48 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 13:51:48 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 13:51:48 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 13:51:48 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 13:51:48 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 13:51:48 nanopi user.info kernel: [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 13:51:48 nanopi user.info kernel: [    0.000022] Switching to timer-based delay loop, resolution 41ns
Dec 16 13:51:48 nanopi user.info kernel: [    0.000212] Console: colour dummy device 80x30
Dec 16 13:51:48 nanopi user.info kernel: [    0.000280] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000302] pid_max: default: 32768 minimum: 301
Dec 16 13:51:48 nanopi user.info kernel: [    0.000440] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.000457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.001167] CPU: Testing write buffer coherency: ok
Dec 16 13:51:48 nanopi user.err kernel: [    0.001518] /cpus/cpu@0 missing clock-frequency property
Dec 16 13:51:48 nanopi user.err kernel: [    0.001544] /cpus/cpu@1 missing clock-frequency property
Dec 16 13:51:48 nanopi user.err kernel: [    0.001563] /cpus/cpu@2 missing clock-frequency property
Dec 16 13:51:48 nanopi user.err kernel: [    0.001582] /cpus/cpu@3 missing clock-frequency property
Dec 16 13:51:48 nanopi user.info kernel: [    0.001595] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 13:51:48 nanopi user.info kernel: [    0.002178] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 13:51:48 nanopi user.info kernel: [    0.002303] rcu: Hierarchical SRCU implementation.
Dec 16 13:51:48 nanopi user.info kernel: [    0.002931] smp: Bringing up secondary CPUs ...
Dec 16 13:51:48 nanopi user.info kernel: [    0.013686] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 13:51:48 nanopi user.info kernel: [    0.024504] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 13:51:48 nanopi user.info kernel: [    0.035264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 13:51:48 nanopi user.info kernel: [    0.035360] smp: Brought up 1 node, 4 CPUs
Dec 16 13:51:48 nanopi user.info kernel: [    0.035388] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 13:51:48 nanopi user.info kernel: [    0.035396] CPU: All CPU(s) started in HYP mode.
Dec 16 13:51:48 nanopi user.info kernel: [    0.035402] CPU: Virtualization extensions available.
Dec 16 13:51:48 nanopi user.info kernel: [    0.036104] devtmpfs: initialized
Dec 16 13:51:48 nanopi user.info kernel: [    0.041386] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 13:51:48 nanopi user.info kernel: [    0.041576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 13:51:48 nanopi user.info kernel: [    0.041605] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.043886] pinctrl core: initialized pinctrl subsystem
Dec 16 13:51:48 nanopi user.info kernel: [    0.044952] NET: Registered protocol family 16
Dec 16 13:51:48 nanopi user.info kernel: [    0.046519] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 13:51:48 nanopi user.info kernel: [    0.047545] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 13:51:48 nanopi user.info kernel: [    0.047943] cpuidle: using governor menu
Dec 16 13:51:48 nanopi user.info kernel: [    0.048155] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 13:51:48 nanopi user.info kernel: [    0.048167] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 13:51:48 nanopi user.info kernel: [    0.065399] cryptd: max_cpu_qlen set to 1000
Dec 16 13:51:48 nanopi user.info kernel: [    0.066611] vdd-sys-3v3: supplied by vdd-5v
Dec 16 13:51:48 nanopi user.info kernel: [    0.067270] iommu: Default domain type: Translated 
Dec 16 13:51:48 nanopi user.info kernel: [    0.067507] usbcore: registered new interface driver usbfs
Dec 16 13:51:48 nanopi user.info kernel: [    0.067574] usbcore: registered new interface driver hub
Dec 16 13:51:48 nanopi user.info kernel: [    0.067620] usbcore: registered new device driver usb
Dec 16 13:51:48 nanopi user.info kernel: [    0.069094] clocksource: Switched to clocksource arch_sys_counter
Dec 16 13:51:48 nanopi user.info kernel: [    0.076533] NET: Registered protocol family 2
Dec 16 13:51:48 nanopi user.info kernel: [    0.076725] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077424] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077456] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077501] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077567] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077693] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077754] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:51:48 nanopi user.info kernel: [    0.077917] NET: Registered protocol family 1
Dec 16 13:51:48 nanopi user.info kernel: [    0.079261] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 13:51:48 nanopi user.notice kernel: [    0.080960] Initialise system trusted keyrings
Dec 16 13:51:48 nanopi user.info kernel: [    0.081145] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 13:51:48 nanopi user.notice kernel: [    0.085256] Key type asymmetric registered
Dec 16 13:51:48 nanopi user.notice kernel: [    0.085280] Asymmetric key parser 'x509' registered
Dec 16 13:51:48 nanopi user.err kernel: [    0.086037] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 13:51:48 nanopi user.info kernel: [    0.089727] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.091594] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.096535] Serial: 8250/16550 driver, 8 ports
Dec 16 13:51:48 nanopi user.info kernel: [    0.117444] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a 16550A
Dec 16 13:51:48 nanopi user.info kernel: [    0.699969] printk: console [ttyS0] enabled
Dec 16 13:51:48 nanopi user.info kernel: [    0.725234] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 13:51:48 nanopi user.info kernel: [    0.755082] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 13:51:48 nanopi user.info kernel: [    0.784902] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 13:51:48 nanopi user.info kernel: [    0.795964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.802523] ehci-platform: EHCI generic platform driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.808185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.814397] ohci-platform: OHCI generic platform driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.820816] i2c /dev entries driver
Dec 16 13:51:48 nanopi user.info kernel: [    0.824884] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 13:51:48 nanopi user.info kernel: [    0.830727] i2c i2c-0: using generic GPIOs for recovery
Dec 16 13:51:48 nanopi user.info kernel: [    0.837188] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 13:51:48 nanopi user.info kernel: [    0.845968] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 13:51:48 nanopi user.info kernel: [    0.852212] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T13:51:42 UTC (1671198702)
Dec 16 13:51:48 nanopi user.info kernel: [    0.861336] pca953x 0-0020: using no AI
Dec 16 13:51:48 nanopi user.info kernel: [    0.869063] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 13:51:48 nanopi user.info kernel: [    0.877598] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 13:51:48 nanopi user.info kernel: [    0.887488] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 13:51:48 nanopi user.info kernel: [    0.889627] NET: Registered protocol family 10
Dec 16 13:51:48 nanopi user.info kernel: [    0.897340] Segment Routing with IPv6
Dec 16 13:51:48 nanopi user.info kernel: [    0.901115] NET: Registered protocol family 17
Dec 16 13:51:48 nanopi user.notice kernel: [    0.905659] Registering SWP/SWPB emulation handler
Dec 16 13:51:48 nanopi user.info kernel: [    0.912254] registered taskstats version 1
Dec 16 13:51:48 nanopi user.info kernel: [    0.912807] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:51:48 nanopi user.notice kernel: [    0.916370] Loading compiled-in X.509 certificates
Dec 16 13:51:48 nanopi user.info kernel: [    0.917288] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:51:48 nanopi user.info kernel: [    0.944979] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 13:51:48 nanopi user.info kernel: [    0.993944] mmc1: new DDR MMC card at address 0001
Dec 16 13:51:48 nanopi user.info kernel: [    0.999676] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 13:51:48 nanopi user.info kernel: [    1.004728] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 13:51:48 nanopi user.notice kernel: [    1.009641] random: fast init done
Dec 16 13:51:48 nanopi user.info kernel: [    1.011184] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 13:51:48 nanopi user.info kernel: [    1.021445]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 13:51:48 nanopi user.info kernel: [    1.159985] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.165897] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 13:51:48 nanopi user.info kernel: [    1.174049] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 13:51:48 nanopi user.info kernel: [    1.209110] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:51:48 nanopi user.info kernel: [    1.215428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:51:48 nanopi user.info kernel: [    1.223716] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:51:48 nanopi user.info kernel: [    1.230944] usb usb1: Product: EHCI Host Controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.235820] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:51:48 nanopi user.info kernel: [    1.242094] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 13:51:48 nanopi user.info kernel: [    1.247146] hub 1-0:1.0: USB hub found
Dec 16 13:51:48 nanopi user.info kernel: [    1.250978] hub 1-0:1.0: 1 port detected
Dec 16 13:51:48 nanopi user.info kernel: [    1.255760] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.261606] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 13:51:48 nanopi user.info kernel: [    1.269607] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 13:51:48 nanopi user.info kernel: [    1.299094] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:51:48 nanopi user.info kernel: [    1.305364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:51:48 nanopi user.info kernel: [    1.313643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:51:48 nanopi user.info kernel: [    1.320869] usb usb2: Product: EHCI Host Controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.325743] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:51:48 nanopi user.info kernel: [    1.332018] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 13:51:48 nanopi user.info kernel: [    1.337026] hub 2-0:1.0: USB hub found
Dec 16 13:51:48 nanopi user.info kernel: [    1.340846] hub 2-0:1.0: 1 port detected
Dec 16 13:51:48 nanopi user.info kernel: [    1.345574] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.352444] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 13:51:48 nanopi user.info kernel: [    1.360395] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 13:51:48 nanopi user.info kernel: [    1.433281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:51:48 nanopi user.info kernel: [    1.441567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:51:48 nanopi user.info kernel: [    1.448782] usb usb3: Product: Generic Platform OHCI controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.454711] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:51:48 nanopi user.info kernel: [    1.460981] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 13:51:48 nanopi user.info kernel: [    1.466025] hub 3-0:1.0: USB hub found
Dec 16 13:51:48 nanopi user.info kernel: [    1.469898] hub 3-0:1.0: 1 port detected
Dec 16 13:51:48 nanopi user.info kernel: [    1.474616] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.481589] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 13:51:48 nanopi user.info kernel: [    1.489619] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 13:51:48 nanopi user.info kernel: [    1.539103] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 13:51:48 nanopi user.info kernel: [    1.563316] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:51:48 nanopi user.info kernel: [    1.571594] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:51:48 nanopi user.info kernel: [    1.578810] usb usb4: Product: Generic Platform OHCI controller
Dec 16 13:51:48 nanopi user.info kernel: [    1.584735] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:51:48 nanopi user.info kernel: [    1.591008] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 13:51:48 nanopi user.info kernel: [    1.596005] hub 4-0:1.0: USB hub found
Dec 16 13:51:48 nanopi user.info kernel: [    1.599892] hub 4-0:1.0: 1 port detected
Dec 16 13:51:48 nanopi user.info kernel: [    1.608592] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 13:51:48 nanopi user.info kernel: [    1.621698] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 13:51:48 nanopi user.info kernel: [    1.629019] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 13:51:48 nanopi user.info kernel: [    1.644837] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 13:51:48 nanopi user.info kernel: [    1.650115] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:51:48 nanopi user.info kernel: [    1.658288] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 13:51:48 nanopi user.info kernel: [    1.665721] devtmpfs: mounted
Dec 16 13:51:48 nanopi user.info kernel: [    1.670091] Freeing unused kernel memory: 1024K
Dec 16 13:51:48 nanopi user.info kernel: [    1.679251] Run /sbin/init as init process
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683344]   with arguments:
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683349]     /sbin/init
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683353]     5
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683357]   with environment:
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683361]     HOME=/
Dec 16 13:51:48 nanopi user.debug kernel: [    1.683365]     TERM=linux
Dec 16 13:51:48 nanopi user.warn kernel: [    1.739898] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.750311] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.760191] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.769857] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.779436] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.789107] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.789121] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.808337] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.818171] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.827880] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.837470] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.847161] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.847174] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.866381] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 13:51:48 nanopi user.warn kernel: [    1.875953] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 13:51:48 nanopi user.info kernel: [    1.885852] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:51:48 nanopi user.info kernel: [    1.893510] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 13:51:48 nanopi user.info kernel: [    1.901760] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:51:48 nanopi user.info kernel: [    1.908930] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 13:51:48 nanopi user.info kernel: [    1.913771] usb 1-1: Manufacturer: Realtek
Dec 16 13:51:48 nanopi user.info kernel: [    1.917891] usb 1-1: SerialNumber: 00e04c000001
Dec 16 13:51:48 nanopi user.info kernel: [    1.923170] usb 1-1: skipping disabled interface 0
Dec 16 13:51:48 nanopi user.info kernel: [    1.928021] usb 1-1: skipping disabled interface 1
Dec 16 13:51:48 nanopi user.info kernel: [    2.039148] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:51:48 nanopi user.info kernel: [    2.199380] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 13:51:48 nanopi user.info kernel: [    2.204424] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:51:48 nanopi user.info kernel: [    2.212627] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 13:51:48 nanopi user.info kernel: [    2.220817] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:51:48 nanopi user.info kernel: [    2.227987] usb 3-1: Product: VE SLCAN Interface
Dec 16 13:51:48 nanopi user.info kernel: [    2.232763] usb 3-1: Manufacturer: Victron Energy
Dec 16 13:51:48 nanopi user.info kernel: [    2.237505] usb 3-1: SerialNumber: D307F4KH
Dec 16 13:51:48 nanopi user.info kernel: [    2.331287] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 13:51:48 nanopi user.info kernel: [    2.339544] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:51:48 nanopi user.info kernel: [    2.346710] usb 4-1: Product: FT232R USB UART
Dec 16 13:51:48 nanopi daemon.info kernel: [    2.347008] udevd[132]: starting version 3.2.9
Dec 16 13:51:48 nanopi user.info kernel: [    2.351101] usb 4-1: Manufacturer: FTDI
Dec 16 13:51:48 nanopi user.info kernel: [    2.351108] usb 4-1: SerialNumber: AG0KG587
Dec 16 13:51:48 nanopi user.notice kernel: [    2.375870] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:51:48 nanopi user.notice kernel: [    2.383018] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:51:48 nanopi user.notice kernel: [    2.389585] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:51:48 nanopi daemon.info kernel: [    2.419816] udevd[133]: starting eudev-3.2.9
Dec 16 13:51:48 nanopi user.info kernel: [    2.459334] usbcore: registered new interface driver usbserial_generic
Dec 16 13:51:48 nanopi user.info kernel: [    2.466077] usbserial: USB Serial support registered for generic
Dec 16 13:51:48 nanopi user.info kernel: [    2.478705] usbcore: registered new interface driver ftdi_sio
Dec 16 13:51:48 nanopi user.info kernel: [    2.484875] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 13:51:48 nanopi user.info kernel: [    2.492706] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:51:48 nanopi user.info kernel: [    2.499770] usb 3-1: Detected FT-X
Dec 16 13:51:48 nanopi user.info kernel: [    2.510963] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 13:51:48 nanopi user.info kernel: [    2.518466] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:51:48 nanopi user.info kernel: [    2.525602] usb 4-1: Detected FT232RL
Dec 16 13:51:48 nanopi user.info kernel: [    2.535229] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 13:51:48 nanopi user.warn kernel: [    2.640527] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 13:51:48 nanopi user.notice kernel: [    2.665038] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 13:51:48 nanopi user.info kernel: [    2.674389] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 13:51:48 nanopi user.info kernel: [    2.681129] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 13:51:48 nanopi user.info kernel: [    2.685586] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 13:51:48 nanopi user.info kernel: [    2.687551] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 13:51:48 nanopi user.info kernel: [    2.693913] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 13:51:48 nanopi user.info kernel: [    2.700289] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 13:51:48 nanopi user.notice kernel: [    2.701744] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 13:51:48 nanopi user.info kernel: [    2.706294] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 13:51:48 nanopi user.info kernel: [    2.715307] lima 1c40000.gpu: bus rate = 200000000
Dec 16 13:51:48 nanopi user.info kernel: [    2.721244] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 13:51:48 nanopi user.warn kernel: [    2.725146] 8723bu: loading out-of-tree module taints kernel.
Dec 16 13:51:48 nanopi user.info kernel: [    2.726798] lima 1c40000.gpu: mod rate = 297000000
Dec 16 13:51:48 nanopi user.warn kernel: [    2.731728] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 13:51:48 nanopi user.err kernel: [    2.737619] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 13:51:48 nanopi user.info kernel: [    2.743953] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 13:51:48 nanopi user.info kernel: [    2.758348] lima 1c40000.gpu: Failed to register cooling device
Dec 16 13:51:48 nanopi user.info kernel: [    2.765713] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 13:51:48 nanopi user.info kernel: [    2.765740] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 13:51:48 nanopi user.info kernel: [    2.774061] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 13:51:48 nanopi user.info kernel: [    2.778970] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 13:51:48 nanopi user.info kernel: [    2.798308] CAN device driver interface
Dec 16 13:51:48 nanopi user.info kernel: [    2.798374] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 13:51:48 nanopi user.info kernel: [    2.814299] slcan: serial line CAN interface driver
Dec 16 13:51:48 nanopi user.info kernel: [    2.814802] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 13:51:48 nanopi user.info kernel: [    2.817150] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 13:51:48 nanopi user.info kernel: [    2.819985] slcan: 10 dynamic interface channels.
Dec 16 13:51:48 nanopi user.info kernel: [    2.826316] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 13:51:48 nanopi user.info kernel: [    2.835343] can0: renamed from slcan0
Dec 16 13:51:48 nanopi user.info kernel: [    2.836633] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 13:51:48 nanopi user.info kernel: [    3.060862] usbcore: registered new interface driver rtl8723bu
Dec 16 13:51:48 nanopi user.info kernel: [    3.115547] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 13:51:48 nanopi user.info kernel: [    3.169637] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 13:51:48 nanopi user.info kernel: [    3.312764] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 13:51:48 nanopi user.warn kernel: [    4.082704] urandom_read: 4 callbacks suppressed
Dec 16 13:51:48 nanopi user.notice kernel: [    4.082716] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 13:51:48 nanopi user.notice kernel: [    4.162379] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 13:51:48 nanopi user.crit kernel: [    4.747801] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:51:48 nanopi user.notice kernel: [    6.641525] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 13:51:48 nanopi user.info kernel: [    6.841474] Bluetooth: Core ver 2.22
Dec 16 13:51:48 nanopi user.info kernel: [    6.845318] NET: Registered protocol family 31
Dec 16 13:51:48 nanopi user.info kernel: [    6.849883] Bluetooth: HCI device and connection manager initialized
Dec 16 13:51:48 nanopi user.info kernel: [    6.856281] Bluetooth: HCI socket layer initialized
Dec 16 13:51:48 nanopi user.info kernel: [    6.861217] Bluetooth: L2CAP socket layer initialized
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Successfully dropped root privileges.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: avahi-daemon 0.7 starting up.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Successfully called chroot().
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Successfully dropped remaining capabilities.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Loading service file /services/garmin.service.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Loading service file /services/raymarine.service.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Network interface enumeration completed.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Server startup complete. Host name is venus.local. Local service cookie is 2766288577.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Connection Manager version 1.33
Dec 16 13:51:48 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 13:51:48 nanopi daemon.warn connmand[612]: Failed to flush table 'mangle': Invalid argument
Dec 16 13:51:48 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 13:51:48 nanopi daemon.warn connmand[612]: Failed to flush table 'nat': Invalid argument
Dec 16 13:51:48 nanopi daemon.err connmand[612]: iptables support missing error 2 (No such file or directory)
Dec 16 13:51:48 nanopi daemon.warn connmand[612]: Failed to install iptables rules: Invalid argument
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Checking loopback interface settings
Dec 16 13:51:48 nanopi daemon.info connmand[612]: System hostname is nanopi
Dec 16 13:51:48 nanopi daemon.info dbus-daemon[548]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=612 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {create} index 2 type 1 <ETHER>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {update} flags 4098 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 13:51:48 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully called chroot().
Dec 16 13:51:48 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully dropped root privileges.
Dec 16 13:51:48 nanopi user.info kernel: [    7.484365] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 13:51:48 nanopi user.info kernel: [    7.498812] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 13:51:48 nanopi user.info kernel: [    7.506652] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 13:51:48 nanopi user.warn kernel: [    7.515472] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 13:51:48 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Starting with address 169.254.6.38
Dec 16 13:51:48 nanopi user.info kernel: [    7.524383] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 13:51:48 nanopi user.info kernel: [    7.534531] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Adding interface eth0 [ ethernet ]
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 4E:36:56:4C:6B:57 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 13:51:48 nanopi daemon.info connmand[612]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:51:48 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {update} flags 4098 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Adding interface wifi0 [ wifi ]
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {update} flags 4099 <UP>
Dec 16 13:51:48 nanopi user.info kernel: [    7.544012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Adding interface ap0 [ wifi ]
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 4E:36:56:4C:6B:57 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 4E:36:56:4C:6B:57 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 0 <UNKNOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 4099 <UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 4E:36:56:4C:6B:57 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 3 <LOWER-LAYER-DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:51:48 nanopi daemon.info dbus-daemon[548]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 13:51:48 nanopi daemon.notice wpa_supplicant[667]: Successfully initialized wpa_supplicant
Dec 16 13:51:48 nanopi daemon.warn connmand[612]: Skipping disconnect of carrier, network is connecting.
Dec 16 13:51:48 nanopi cron.info crond[691]: (CRON) STARTUP (1.5.5)
Dec 16 13:51:48 nanopi cron.info crond[691]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 13:51:48 nanopi cron.info crond[691]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 1% if used.)
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 13:51:48 nanopi daemon.info avahi-daemon[586]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 13:51:48 nanopi daemon.info connmand[612]: Setting domainname to hwhb.co.uk
Dec 16 13:51:48 nanopi daemon.info dnsmasq[564]: started, version 2.83 cachesize 150
Dec 16 13:51:48 nanopi daemon.warn dnsmasq[564]: overflow: 3 log entries lost
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 address 4E:36:56:4C:6B:57 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {update} flags 36867 <UP>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:51:48 nanopi daemon.info connmand[612]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:51:49 nanopi user.notice kernel: [    7.942160] random: crng init done
Dec 16 13:51:49 nanopi user.warn wpa_supplicant[667]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 13:51:49 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:51:49 nanopi daemon.notice wpa_supplicant[667]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:51:49 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 13:51:49 nanopi daemon.info connmand[612]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:51:49 nanopi user.info kernel: [    8.263774] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 13:51:49 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 13:51:49 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 13:51:49 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 8.0041
Dec 16 13:51:49 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 13:51:49 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:51:49 nanopi daemon.info avahi-daemon[586]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 13:51:49 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:51:49 nanopi daemon.info connmand[612]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:51:49 nanopi daemon.info connmand[612]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:51:50 nanopi daemon.info dnsmasq[564]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 13:51:50 nanopi daemon.info dnsmasq[564]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 13:51:51 nanopi daemon.info connmand[612]: ll-eth0 {add} address 2001:8b0:1552:697c:4c36:56ff:fe4c:6b57/64 label (null) family 10
Dec 16 13:51:51 nanopi daemon.info connmand[612]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 13:51:51 nanopi daemon.info avahi-daemon[586]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:51:51 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:51:51 nanopi daemon.info avahi-daemon[586]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:51:51 nanopi daemon.info avahi-daemon[586]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 13:51:52 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:51:53 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Callout BIND, address 169.254.6.38 on interface ll-eth0
Dec 16 13:51:53 nanopi daemon.info connmand[612]: ll-eth0 {add} address 169.254.6.38/16 label ll-eth0 family 2
Dec 16 13:51:53 nanopi daemon.info connmand[612]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:51:54 nanopi user.info kernel: [   12.893750] can: controller area network core
Dec 16 13:51:54 nanopi user.info kernel: [   12.898409] NET: Registered protocol family 29
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 address 00:00:00:00:00:00 mtu 16
Dec 16 13:51:54 nanopi daemon.info connmand[612]: can0 {newlink} index 3 operstate 6 <UP>
Dec 16 13:51:54 nanopi user.info kernel: [   13.024619] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 13:51:54 nanopi daemon.info connmand[612]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:51:54 nanopi user.info kernel: [   13.722541] can: raw protocol
Dec 16 13:51:56 nanopi daemon.info connmand[612]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:51:56 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:51:56 nanopi daemon.info connmand[612]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:51:56 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:51:56 nanopi daemon.info connmand[612]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 13:51:56 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 13:51:56 nanopi daemon.info connmand[612]: Ignoring interface ap0 (filtered)
Dec 16 13:51:56 nanopi daemon.info avahi-daemon[586]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 13:51:56 nanopi user.info kernel: [   15.060381] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 13:51:57 nanopi daemon.info avahi-autoipd(ll-eth0)[666]: Successfully claimed IP address 169.254.6.38
Dec 16 13:51:57 nanopi daemon.info avahi-daemon[586]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:51:57 nanopi daemon.info avahi-daemon[586]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 13:51:57 nanopi daemon.info avahi-daemon[586]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 13:52:05 nanopi user.info kernel: [   24.527584] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:52:05 nanopi authpriv.notice login[1657]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 13:52:25 nanopi daemon.info connmand[612]: ntp: time slew +0.903917 s
Dec 16 13:54:05 nanopi daemon.err connmand[612]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:56:16 nanopi daemon.warn connmand[612]: Online check failed for 0x8603a8 Wired
>>>>>>>>>>>> REBOOT <<<<<<<<<<<<<<<<<
Dec 16 13:58:19 nanopi syslog.info syslogd started: BusyBox v1.31.1
Dec 16 13:58:19 nanopi user.notice kernel: klogd started: BusyBox v1.31.1 (2022-10-16 22:32:48 UTC)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0 
Dec 16 13:58:19 nanopi user.notice kernel: [    0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sun Oct 16 23:29:26 UTC 2022
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] OF: fdt: Machine model: MultiPlus-II
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] cma: Reserved 64 MiB at 0x5bc00000
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Zone ranges:
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000]   HighMem  empty
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Movable zone start for each node
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Early memory node ranges
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] psci: probing for conduit method from DT.
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000] pcpu-alloc: s31564 r8192 d21684 u61440 alloc=15*4096
Dec 16 13:58:19 nanopi user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
Dec 16 13:58:19 nanopi user.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Dec 16 13:58:19 nanopi user.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Dec 16 13:58:19 nanopi user.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Dec 16 13:58:19 nanopi user.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Dec 16 13:58:19 nanopi user.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 41ns
Dec 16 13:58:19 nanopi user.info kernel: [    0.000214] Console: colour dummy device 80x30
Dec 16 13:58:19 nanopi user.info kernel: [    0.000281] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000302] pid_max: default: 32768 minimum: 301
Dec 16 13:58:19 nanopi user.info kernel: [    0.000442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.000458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.001169] CPU: Testing write buffer coherency: ok
Dec 16 13:58:19 nanopi user.err kernel: [    0.001516] /cpus/cpu@0 missing clock-frequency property
Dec 16 13:58:19 nanopi user.err kernel: [    0.001543] /cpus/cpu@1 missing clock-frequency property
Dec 16 13:58:19 nanopi user.err kernel: [    0.001563] /cpus/cpu@2 missing clock-frequency property
Dec 16 13:58:19 nanopi user.err kernel: [    0.001582] /cpus/cpu@3 missing clock-frequency property
Dec 16 13:58:19 nanopi user.info kernel: [    0.001595] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 16 13:58:19 nanopi user.info kernel: [    0.002193] Setting up static identity map for 0x40100000 - 0x40100060
Dec 16 13:58:19 nanopi user.info kernel: [    0.002318] rcu: Hierarchical SRCU implementation.
Dec 16 13:58:19 nanopi user.info kernel: [    0.002956] smp: Bringing up secondary CPUs ...
Dec 16 13:58:19 nanopi user.info kernel: [    0.013714] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 16 13:58:19 nanopi user.info kernel: [    0.024528] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Dec 16 13:58:19 nanopi user.info kernel: [    0.035288] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Dec 16 13:58:19 nanopi user.info kernel: [    0.035385] smp: Brought up 1 node, 4 CPUs
Dec 16 13:58:19 nanopi user.info kernel: [    0.035412] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Dec 16 13:58:19 nanopi user.info kernel: [    0.035421] CPU: All CPU(s) started in HYP mode.
Dec 16 13:58:19 nanopi user.info kernel: [    0.035427] CPU: Virtualization extensions available.
Dec 16 13:58:19 nanopi user.info kernel: [    0.036126] devtmpfs: initialized
Dec 16 13:58:19 nanopi user.info kernel: [    0.041410] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Dec 16 13:58:19 nanopi user.info kernel: [    0.041605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 16 13:58:19 nanopi user.info kernel: [    0.041636] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.043921] pinctrl core: initialized pinctrl subsystem
Dec 16 13:58:19 nanopi user.info kernel: [    0.044997] NET: Registered protocol family 16
Dec 16 13:58:19 nanopi user.info kernel: [    0.046568] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 16 13:58:19 nanopi user.info kernel: [    0.047593] thermal_sys: Registered thermal governor 'step_wise'
Dec 16 13:58:19 nanopi user.info kernel: [    0.047994] cpuidle: using governor menu
Dec 16 13:58:19 nanopi user.info kernel: [    0.048201] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Dec 16 13:58:19 nanopi user.info kernel: [    0.048212] hw-breakpoint: maximum watchpoint size is 8 bytes.
Dec 16 13:58:19 nanopi user.info kernel: [    0.065483] cryptd: max_cpu_qlen set to 1000
Dec 16 13:58:19 nanopi user.info kernel: [    0.066706] vdd-sys-3v3: supplied by vdd-5v
Dec 16 13:58:19 nanopi user.info kernel: [    0.067369] iommu: Default domain type: Translated 
Dec 16 13:58:19 nanopi user.info kernel: [    0.067607] usbcore: registered new interface driver usbfs
Dec 16 13:58:19 nanopi user.info kernel: [    0.067675] usbcore: registered new interface driver hub
Dec 16 13:58:19 nanopi user.info kernel: [    0.067721] usbcore: registered new device driver usb
Dec 16 13:58:19 nanopi user.info kernel: [    0.069155] clocksource: Switched to clocksource arch_sys_counter
Dec 16 13:58:19 nanopi user.info kernel: [    0.076598] NET: Registered protocol family 2
Dec 16 13:58:19 nanopi user.info kernel: [    0.076793] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077483] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077514] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077561] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077625] TCP: Hash tables configured (established 4096 bind 4096)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077753] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077803] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Dec 16 13:58:19 nanopi user.info kernel: [    0.077958] NET: Registered protocol family 1
Dec 16 13:58:19 nanopi user.info kernel: [    0.079300] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Dec 16 13:58:19 nanopi user.notice kernel: [    0.081044] Initialise system trusted keyrings
Dec 16 13:58:19 nanopi user.info kernel: [    0.081243] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 16 13:58:19 nanopi user.notice kernel: [    0.085259] Key type asymmetric registered
Dec 16 13:58:19 nanopi user.notice kernel: [    0.085283] Asymmetric key parser 'x509' registered
Dec 16 13:58:19 nanopi user.err kernel: [    0.086052] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
Dec 16 13:58:19 nanopi user.info kernel: [    0.089773] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.091680] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.096619] Serial: 8250/16550 driver, 8 ports
Dec 16 13:58:19 nanopi user.info kernel: [    0.117452] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
Dec 16 13:58:19 nanopi user.info kernel: [    0.700266] printk: console [ttyS0] enabled
Dec 16 13:58:19 nanopi user.info kernel: [    0.725496] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
Dec 16 13:58:19 nanopi user.info kernel: [    0.755356] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
Dec 16 13:58:19 nanopi user.info kernel: [    0.785152] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
Dec 16 13:58:19 nanopi user.info kernel: [    0.796174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.802730] ehci-platform: EHCI generic platform driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.808369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.814586] ohci-platform: OHCI generic platform driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.821001] i2c /dev entries driver
Dec 16 13:58:19 nanopi user.info kernel: [    0.825052] i2c i2c-0: using pinctrl states for GPIO recovery
Dec 16 13:58:19 nanopi user.info kernel: [    0.830900] i2c i2c-0: using generic GPIOs for recovery
Dec 16 13:58:19 nanopi user.info kernel: [    0.837367] at24 0-0050: 256 byte 24c02 EEPROM, read-only
Dec 16 13:58:19 nanopi user.info kernel: [    0.846176] rtc-pcf8523 0-0068: registered as rtc0
Dec 16 13:58:19 nanopi user.info kernel: [    0.852416] rtc-pcf8523 0-0068: setting system clock to 2022-12-16T13:58:13 UTC (1671199093)
Dec 16 13:58:19 nanopi user.info kernel: [    0.861556] pca953x 0-0020: using no AI
Dec 16 13:58:19 nanopi user.info kernel: [    0.869862] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
Dec 16 13:58:19 nanopi user.info kernel: [    0.878319] watchdog: watchdog0 running and kernel based pre-userspace handler disabled
Dec 16 13:58:19 nanopi user.info kernel: [    0.888265] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Dec 16 13:58:19 nanopi user.info kernel: [    0.890378] NET: Registered protocol family 10
Dec 16 13:58:19 nanopi user.info kernel: [    0.898101] Segment Routing with IPv6
Dec 16 13:58:19 nanopi user.info kernel: [    0.901886] NET: Registered protocol family 17
Dec 16 13:58:19 nanopi user.notice kernel: [    0.906433] Registering SWP/SWPB emulation handler
Dec 16 13:58:19 nanopi user.info kernel: [    0.913097] registered taskstats version 1
Dec 16 13:58:19 nanopi user.info kernel: [    0.913545] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:58:19 nanopi user.notice kernel: [    0.917211] Loading compiled-in X.509 certificates
Dec 16 13:58:19 nanopi user.info kernel: [    0.918042] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Dec 16 13:58:19 nanopi user.info kernel: [    0.945857] vdd-vcc-dram: supplied by vdd-sys-3v3
Dec 16 13:58:19 nanopi user.notice kernel: [    0.993957] random: fast init done
Dec 16 13:58:19 nanopi user.info kernel: [    0.997423] mmc1: new DDR MMC card at address 0001
Dec 16 13:58:19 nanopi user.info kernel: [    1.003159] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
Dec 16 13:58:19 nanopi user.info kernel: [    1.008187] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
Dec 16 13:58:19 nanopi user.info kernel: [    1.014679] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
Dec 16 13:58:19 nanopi user.info kernel: [    1.022087]  mmcblk1: p1 p2 p3 p4 < p5 >
Dec 16 13:58:19 nanopi user.info kernel: [    1.160061] ehci-platform 1c1b000.usb: EHCI Host Controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.165961] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Dec 16 13:58:19 nanopi user.info kernel: [    1.174086] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000
Dec 16 13:58:19 nanopi user.info kernel: [    1.209173] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:58:19 nanopi user.info kernel: [    1.215486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:58:19 nanopi user.info kernel: [    1.223773] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:58:19 nanopi user.info kernel: [    1.230999] usb usb1: Product: EHCI Host Controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.235874] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:58:19 nanopi user.info kernel: [    1.242147] usb usb1: SerialNumber: 1c1b000.usb
Dec 16 13:58:19 nanopi user.info kernel: [    1.247226] hub 1-0:1.0: USB hub found
Dec 16 13:58:19 nanopi user.info kernel: [    1.251054] hub 1-0:1.0: 1 port detected
Dec 16 13:58:19 nanopi user.info kernel: [    1.255823] ehci-platform 1c1d000.usb: EHCI Host Controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.261622] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2
Dec 16 13:58:19 nanopi user.info kernel: [    1.269617] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
Dec 16 13:58:19 nanopi user.info kernel: [    1.299162] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Dec 16 13:58:19 nanopi user.info kernel: [    1.305427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Dec 16 13:58:19 nanopi user.info kernel: [    1.313708] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:58:19 nanopi user.info kernel: [    1.320933] usb usb2: Product: EHCI Host Controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.325808] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd
Dec 16 13:58:19 nanopi user.info kernel: [    1.332084] usb usb2: SerialNumber: 1c1d000.usb
Dec 16 13:58:19 nanopi user.info kernel: [    1.337101] hub 2-0:1.0: USB hub found
Dec 16 13:58:19 nanopi user.info kernel: [    1.340908] hub 2-0:1.0: 1 port detected
Dec 16 13:58:19 nanopi user.info kernel: [    1.345644] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.352478] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 3
Dec 16 13:58:19 nanopi user.info kernel: [    1.360426] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
Dec 16 13:58:19 nanopi user.info kernel: [    1.433332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:58:19 nanopi user.info kernel: [    1.441618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:58:19 nanopi user.info kernel: [    1.448833] usb usb3: Product: Generic Platform OHCI controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.454761] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:58:19 nanopi user.info kernel: [    1.461031] usb usb3: SerialNumber: 1c1c400.usb
Dec 16 13:58:19 nanopi user.info kernel: [    1.466007] hub 3-0:1.0: USB hub found
Dec 16 13:58:19 nanopi user.info kernel: [    1.469908] hub 3-0:1.0: 1 port detected
Dec 16 13:58:19 nanopi user.info kernel: [    1.474621] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.481568] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 4
Dec 16 13:58:19 nanopi user.info kernel: [    1.489573] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
Dec 16 13:58:19 nanopi user.info kernel: [    1.539175] usb 1-1: new high-speed USB device number 2 using ehci-platform
Dec 16 13:58:19 nanopi user.info kernel: [    1.563376] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Dec 16 13:58:19 nanopi user.info kernel: [    1.571654] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 16 13:58:19 nanopi user.info kernel: [    1.578869] usb usb4: Product: Generic Platform OHCI controller
Dec 16 13:58:19 nanopi user.info kernel: [    1.584795] usb usb4: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd
Dec 16 13:58:19 nanopi user.info kernel: [    1.591069] usb usb4: SerialNumber: 1c1d400.usb
Dec 16 13:58:19 nanopi user.info kernel: [    1.596054] hub 4-0:1.0: USB hub found
Dec 16 13:58:19 nanopi user.info kernel: [    1.599923] hub 4-0:1.0: 1 port detected
Dec 16 13:58:19 nanopi user.info kernel: [    1.608598] input: disp_keys as /devices/platform/disp_keys/input/input0
Dec 16 13:58:19 nanopi user.info kernel: [    1.621616] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem
Dec 16 13:58:19 nanopi user.info kernel: [    1.628935] EXT4-fs (mmcblk1p3): write access will be enabled during recovery
Dec 16 13:58:19 nanopi user.info kernel: [    1.645164] EXT4-fs (mmcblk1p3): recovery complete
Dec 16 13:58:19 nanopi user.info kernel: [    1.650431] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:58:19 nanopi user.info kernel: [    1.658599] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Dec 16 13:58:19 nanopi user.info kernel: [    1.666035] devtmpfs: mounted
Dec 16 13:58:19 nanopi user.info kernel: [    1.670410] Freeing unused kernel memory: 1024K
Dec 16 13:58:19 nanopi user.info kernel: [    1.679327] Run /sbin/init as init process
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683420]   with arguments:
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683425]     /sbin/init
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683429]     5
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683433]   with environment:
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683437]     HOME=/
Dec 16 13:58:19 nanopi user.debug kernel: [    1.683442]     TERM=linux
Dec 16 13:58:19 nanopi user.warn kernel: [    1.739927] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x81, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.750853] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x2, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.760434] usb 1-1: config 1 interface 0 altsetting 0 has an ignored endpoint with address 0x82, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.770104] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.779687] usb 1-1: config 1 interface 1 altsetting 0 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.789354] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.789366] usb 1-1: config 1 interface 1 altsetting 1 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.808584] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.818415] usb 1-1: config 1 interface 1 altsetting 2 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.828125] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.837720] usb 1-1: config 1 interface 1 altsetting 3 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.847410] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.856989] usb 1-1: config 1 interface 1 altsetting 4 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.866720] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x3, skipping
Dec 16 13:58:19 nanopi user.warn kernel: [    1.876329] usb 1-1: config 1 interface 1 altsetting 5 has an ignored endpoint with address 0x83, skipping
Dec 16 13:58:19 nanopi user.info kernel: [    1.886285] usb 3-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:58:19 nanopi user.info kernel: [    1.893928] usb 1-1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00
Dec 16 13:58:19 nanopi user.info kernel: [    1.902186] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:58:19 nanopi user.info kernel: [    1.909369] usb 1-1: Product: 802.11n WLAN Adapter
Dec 16 13:58:19 nanopi user.info kernel: [    1.914188] usb 1-1: Manufacturer: Realtek
Dec 16 13:58:19 nanopi user.info kernel: [    1.918311] usb 1-1: SerialNumber: 00e04c000001
Dec 16 13:58:19 nanopi user.info kernel: [    1.923702] usb 1-1: skipping disabled interface 0
Dec 16 13:58:19 nanopi user.info kernel: [    1.928530] usb 1-1: skipping disabled interface 1
Dec 16 13:58:19 nanopi user.info kernel: [    2.039219] usb 4-1: new full-speed USB device number 2 using ohci-platform
Dec 16 13:58:19 nanopi user.info kernel: [    2.203253] usb 3-1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
Dec 16 13:58:19 nanopi user.info kernel: [    2.211476] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:58:19 nanopi user.info kernel: [    2.218611] usb 3-1: Product: VE SLCAN Interface
Dec 16 13:58:19 nanopi user.info kernel: [    2.219035] EXT4-fs (mmcblk1p5): recovery complete
Dec 16 13:58:19 nanopi user.info kernel: [    2.223259] usb 3-1: Manufacturer: Victron Energy
Dec 16 13:58:19 nanopi user.info kernel: [    2.223273] usb 3-1: SerialNumber: D307F4KH
Dec 16 13:58:19 nanopi user.info kernel: [    2.228284] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:58:19 nanopi user.info kernel: [    2.321365] usb 4-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Dec 16 13:58:19 nanopi user.info kernel: [    2.329663] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 16 13:58:19 nanopi user.info kernel: [    2.336844] usb 4-1: Product: FT232R USB UART
Dec 16 13:58:19 nanopi user.info kernel: [    2.341286] usb 4-1: Manufacturer: FTDI
Dec 16 13:58:19 nanopi user.info kernel: [    2.345147] usb 4-1: SerialNumber: AG0KG587
Dec 16 13:58:19 nanopi daemon.info kernel: [    2.371515] udevd[132]: starting version 3.2.9
Dec 16 13:58:19 nanopi user.notice kernel: [    2.388123] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:58:19 nanopi user.notice kernel: [    2.395236] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:58:19 nanopi user.notice kernel: [    2.401834] random: udevd: uninitialized urandom read (16 bytes read)
Dec 16 13:58:19 nanopi daemon.info kernel: [    2.432200] udevd[133]: starting eudev-3.2.9
Dec 16 13:58:19 nanopi user.info kernel: [    2.570258] usbcore: registered new interface driver usbserial_generic
Dec 16 13:58:19 nanopi user.info kernel: [    2.577021] usbserial: USB Serial support registered for generic
Dec 16 13:58:19 nanopi user.notice kernel: [    2.598165] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Dec 16 13:58:19 nanopi user.info kernel: [    2.598645] usbcore: registered new interface driver ftdi_sio
Dec 16 13:58:19 nanopi user.warn kernel: [    2.600019] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator
Dec 16 13:58:19 nanopi user.info kernel: [    2.619309] usbserial: USB Serial support registered for FTDI USB Serial Device
Dec 16 13:58:19 nanopi user.info kernel: [    2.626971] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:58:19 nanopi user.info kernel: [    2.634425] usb 3-1: Detected FT-X
Dec 16 13:58:19 nanopi user.info kernel: [    2.645287] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
Dec 16 13:58:19 nanopi user.info kernel: [    2.653300] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Dec 16 13:58:19 nanopi user.info kernel: [    2.660261] usb 4-1: Detected FT232RL
Dec 16 13:58:19 nanopi user.info kernel: [    2.670881] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 16 13:58:19 nanopi user.notice kernel: [    2.678553] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Dec 16 13:58:19 nanopi user.info kernel: [    2.695466] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
Dec 16 13:58:19 nanopi user.info kernel: [    2.701983] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
Dec 16 13:58:19 nanopi user.info kernel: [    2.708548] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
Dec 16 13:58:19 nanopi user.info kernel: [    2.715093] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
Dec 16 13:58:19 nanopi user.warn kernel: [    2.721698] 8723bu: loading out-of-tree module taints kernel.
Dec 16 13:58:19 nanopi user.info kernel: [    2.731639] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Dec 16 13:58:19 nanopi user.info kernel: [    2.736369] lima 1c40000.gpu: bus rate = 200000000
Dec 16 13:58:19 nanopi user.info kernel: [    2.738079] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Dec 16 13:58:19 nanopi user.info kernel: [    2.743130] lima 1c40000.gpu: mod rate = 297000000
Dec 16 13:58:19 nanopi user.info kernel: [    2.749291] dwmac-sun8i 1c30000.ethernet: No regulator found
Dec 16 13:58:19 nanopi user.err kernel: [    2.754057] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
Dec 16 13:58:19 nanopi user.info kernel: [    2.759748] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Dec 16 13:58:19 nanopi user.warn kernel: [    2.773528] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
Dec 16 13:58:19 nanopi user.info kernel: [    2.783957] lima 1c40000.gpu: Failed to register cooling device
Dec 16 13:58:19 nanopi user.info kernel: [    2.789452] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Dec 16 13:58:19 nanopi user.info kernel: [    2.790409] CAN device driver interface
Dec 16 13:58:19 nanopi user.info kernel: [    2.791816] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0
Dec 16 13:58:19 nanopi user.info kernel: [    2.797165] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Dec 16 13:58:19 nanopi user.info kernel: [    2.805648] slcan: serial line CAN interface driver
Dec 16 13:58:19 nanopi user.info kernel: [    2.808128] dwmac-sun8i 1c30000.ethernet: COE Type 2
Dec 16 13:58:19 nanopi user.info kernel: [    2.808154] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Dec 16 13:58:19 nanopi user.info kernel: [    2.815538] slcan: 10 dynamic interface channels.
Dec 16 13:58:19 nanopi user.info kernel: [    2.820433] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Dec 16 13:58:19 nanopi user.info kernel: [    2.828854] can0: renamed from slcan0
Dec 16 13:58:19 nanopi user.info kernel: [    2.832298] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Dec 16 13:58:19 nanopi user.info kernel: [    2.911716] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Dec 16 13:58:19 nanopi user.info kernel: [    2.919075] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Dec 16 13:58:19 nanopi user.info kernel: [    2.925654] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Dec 16 13:58:19 nanopi user.info kernel: [    3.050803] usbcore: registered new interface driver rtl8723bu
Dec 16 13:58:19 nanopi user.info kernel: [    3.112701] rtl8723bu 1-1:1.2 ap0: renamed from wlan1
Dec 16 13:58:19 nanopi user.info kernel: [    3.159686] rtl8723bu 1-1:1.2 wifi0: renamed from wlan0
Dec 16 13:58:19 nanopi user.info kernel: [    3.272621] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
Dec 16 13:58:19 nanopi user.warn kernel: [    4.041723] urandom_read: 4 callbacks suppressed
Dec 16 13:58:19 nanopi user.notice kernel: [    4.041734] random: dd: uninitialized urandom read (512 bytes read)
Dec 16 13:58:19 nanopi user.notice kernel: [    4.121573] random: eeprom: uninitialized urandom read (24 bytes read)
Dec 16 13:58:19 nanopi user.crit kernel: [    4.707839] watchdog: watchdog0: watchdog did not stop!
Dec 16 13:58:19 nanopi user.notice kernel: [    6.712409] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Dec 16 13:58:19 nanopi user.info kernel: [    6.913020] Bluetooth: Core ver 2.22
Dec 16 13:58:19 nanopi user.info kernel: [    6.916878] NET: Registered protocol family 31
Dec 16 13:58:19 nanopi user.info kernel: [    6.921497] Bluetooth: HCI device and connection manager initialized
Dec 16 13:58:19 nanopi user.info kernel: [    6.927926] Bluetooth: HCI socket layer initialized
Dec 16 13:58:19 nanopi user.info kernel: [    6.932935] Bluetooth: L2CAP socket layer initialized
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Found user 'avahi' (UID 994) and group 'avahi' (GID 994).
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Successfully dropped root privileges.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: avahi-daemon 0.7 starting up.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Successfully called chroot().
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Successfully dropped remaining capabilities.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Loading service file /services/garmin.service.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Loading service file /services/raymarine.service.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Network interface enumeration completed.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Server startup complete. Host name is venus.local. Local service cookie is 4024012243.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Service "Victron" (/services/raymarine.service) successfully established.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Service "Victron" (/services/garmin.service) successfully established.
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Connection Manager version 1.33
Dec 16 13:58:19 nanopi daemon.err connmand[616]: iptables support missing error 2 (No such file or directory)
Dec 16 13:58:19 nanopi daemon.warn connmand[616]: Failed to flush table 'mangle': Invalid argument
Dec 16 13:58:19 nanopi daemon.err connmand[616]: iptables support missing error 2 (No such file or directory)
Dec 16 13:58:19 nanopi daemon.warn connmand[616]: Failed to flush table 'nat': Invalid argument
Dec 16 13:58:19 nanopi daemon.err connmand[616]: iptables support missing error 2 (No such file or directory)
Dec 16 13:58:19 nanopi daemon.warn connmand[616]: Failed to install iptables rules: Invalid argument
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Checking loopback interface settings
Dec 16 13:58:19 nanopi daemon.info connmand[616]: System hostname is nanopi
Dec 16 13:58:19 nanopi daemon.info dbus-daemon[553]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=616 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper)
Dec 16 13:58:19 nanopi daemon.info connmand[616]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Dec 16 13:58:19 nanopi daemon.info connmand[616]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: can0 {newlink} index 2 address 00:00:00:00:00:00 mtu 16
Dec 16 13:58:19 nanopi daemon.info connmand[616]: can0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {create} index 3 type 1 <ETHER>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {update} flags 4098 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi user.info kernel: [    7.522360] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
Dec 16 13:58:19 nanopi user.info kernel: [    7.538926] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Dec 16 13:58:19 nanopi user.info kernel: [    7.546535] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Dec 16 13:58:19 nanopi user.warn kernel: [    7.554788] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Adding interface eth0 [ ethernet ]
Dec 16 13:58:19 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Found user 'avahi-autoipd' (UID 997) and group 'avahi-autoipd' (GID 997).
Dec 16 13:58:19 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Successfully called chroot().
Dec 16 13:58:19 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Successfully dropped root privileges.
Dec 16 13:58:19 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Starting with address 169.254.10.36
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {create} index 6 type 1 <ETHER>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {update} flags 4098 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 address 3A:91:AF:7D:83:BD mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi user.info kernel: [    7.562844] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
Dec 16 13:58:19 nanopi user.info kernel: [    7.574240] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {create} index 4 type 1 <ETHER>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {update} flags 4098 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Adding interface wifi0 [ wifi ]
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {create} index 5 type 1 <ETHER>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {update} flags 4099 <UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {newlink} index 5 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Ignoring interface ap0 (filtered)
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Adding interface ap0 [ wifi ]
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 address 3A:91:AF:7D:83:BD mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {update} flags 36931 <UP,RUNNING>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 operstate 0 <UNKNOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {update} flags 4163 <UP,RUNNING>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 address 3A:91:AF:7D:83:BD mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 address 02:81:C2:2D:FD:9A mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {newlink} index 3 operstate 6 <UP>
Dec 16 13:58:19 nanopi user.info kernel: [    7.583574] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 16 13:58:19 nanopi user.info kernel: [    7.590548] IPv6: ADDRCONF(NETDEV_CHANGE): ll-eth0: link becomes ready
Dec 16 13:58:19 nanopi daemon.warn connmand[616]: Skipping disconnect of carrier, network is connecting.
Dec 16 13:58:19 nanopi cron.info crond[692]: (CRON) STARTUP (1.5.5)
Dec 16 13:58:19 nanopi daemon.info dbus-daemon[553]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Dec 16 13:58:19 nanopi cron.info crond[692]: (CRON) INFO (Syslog will be used instead of sendmail.)
Dec 16 13:58:19 nanopi cron.info crond[692]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 26% if used.)
Dec 16 13:58:19 nanopi daemon.notice wpa_supplicant[665]: Successfully initialized wpa_supplicant
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.10.50.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: New relevant interface eth0.IPv4 for mDNS.
Dec 16 13:58:19 nanopi daemon.info avahi-daemon[590]: Registering new address record for 192.168.10.50 on eth0.IPv4.
Dec 16 13:58:19 nanopi daemon.info connmand[616]: Setting domainname to hwhb.co.uk
Dec 16 13:58:19 nanopi user.notice kernel: [    7.794281] random: crng init done
Dec 16 13:58:19 nanopi daemon.info dnsmasq[568]: started, version 2.83 cachesize 150
Dec 16 13:58:19 nanopi daemon.warn dnsmasq[568]: overflow: 3 log entries lost
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 address 3A:91:AF:7D:83:BD mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ll-eth0 {newlink} index 6 operstate 6 <UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {add} address 172.24.24.1/24 label ap0 family 2
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} address 192.168.10.50/24 label eth0 family 2
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 0.0.0.0 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: ap0 {add} route 172.24.24.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 192.168.10.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: eth0 {add} route 192.168.10.1 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {update} flags 36867 <UP>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 address 48:D8:90:22:D3:92 mtu 1450
Dec 16 13:58:19 nanopi daemon.info connmand[616]: wifi0 {newlink} index 4 operstate 2 <DOWN>
Dec 16 13:58:20 nanopi user.warn wpa_supplicant[665]: Libgcrypt warning: missing initialization - please fix the application
Dec 16 13:58:20 nanopi daemon.notice wpa_supplicant[665]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:58:20 nanopi daemon.notice wpa_supplicant[665]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Dec 16 13:58:20 nanopi daemon.err connmand[616]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 16 13:58:20 nanopi daemon.info connmand[616]: eth0 {add} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:58:20 nanopi user.info kernel: [    8.326296] dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
Dec 16 13:58:20 nanopi daemon.info connmand[616]: ll-eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:58:21 nanopi daemon.info dnsmasq[568]: using nameserver fe80::939f:6c6b:2b95:5183#53
Dec 16 13:58:21 nanopi daemon.info dnsmasq[568]: using nameserver fe80::e221:939:cdcf:2f02#53
Dec 16 13:58:21 nanopi daemon.info haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 9.3.0 CTV); collect: 128K
Dec 16 13:58:21 nanopi daemon.info haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14660/63044
Dec 16 13:58:21 nanopi daemon.info haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B):  last entropy estimate 7.99498
Dec 16 13:58:21 nanopi daemon.info haveged: haveged: fills: 0, generated: 0 
Dec 16 13:58:21 nanopi daemon.info connmand[616]: eth0 {add} route 2001:8b0:1552:697c:: gw :: scope 0 <UNIVERSE>
Dec 16 13:58:21 nanopi daemon.info avahi-daemon[590]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:58:21 nanopi daemon.info avahi-daemon[590]: New relevant interface eth0.IPv6 for mDNS.
Dec 16 13:58:21 nanopi daemon.info avahi-daemon[590]: Registering new address record for fe80::81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:58:22 nanopi daemon.info connmand[616]: ll-eth0 {add} address 2001:8b0:1552:697c:3891:afff:fe7d:83bd/64 label (null) family 10
Dec 16 13:58:22 nanopi daemon.info connmand[616]: eth0 {add} address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a/64 label (null) family 10
Dec 16 13:58:22 nanopi daemon.info avahi-daemon[590]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::81:c2ff:fe2d:fd9a.
Dec 16 13:58:22 nanopi daemon.info avahi-daemon[590]: Joining mDNS multicast group on interface eth0.IPv6 with address 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a.
Dec 16 13:58:22 nanopi daemon.info avahi-daemon[590]: Registering new address record for 2001:8b0:1552:697c:81:c2ff:fe2d:fd9a on eth0.*.
Dec 16 13:58:22 nanopi daemon.info avahi-daemon[590]: Withdrawing address record for fe80::81:c2ff:fe2d:fd9a on eth0.
Dec 16 13:58:23 nanopi daemon.err connmand[616]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 13:58:24 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Callout BIND, address 169.254.10.36 on interface ll-eth0
Dec 16 13:58:25 nanopi daemon.info connmand[616]: eth0 {del} route 82.165.8.211 gw 192.168.10.1 scope 0 <UNIVERSE>
Dec 16 13:58:25 nanopi daemon.info connmand[616]: ll-eth0 {add} address 169.254.10.36/16 label ll-eth0 family 2
Dec 16 13:58:25 nanopi daemon.info connmand[616]: ll-eth0 {add} route 169.254.0.0 gw 0.0.0.0 scope 253 <LINK>
Dec 16 13:58:25 nanopi user.info kernel: [   13.144576] can: controller area network core
Dec 16 13:58:25 nanopi user.info kernel: [   13.149472] NET: Registered protocol family 29
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 address 00:00:00:00:00:00 mtu 16
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 address 00:00:00:00:00:00 mtu 16
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 operstate 2 <DOWN>
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 address 00:00:00:00:00:00 mtu 16
Dec 16 13:58:25 nanopi daemon.info connmand[616]: can0 {newlink} index 2 operstate 6 <UP>
Dec 16 13:58:25 nanopi user.info kernel: [   13.321867] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
Dec 16 13:58:26 nanopi user.info kernel: [   14.220632] can: raw protocol
Dec 16 13:58:27 nanopi daemon.info connmand[616]: ap0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Dec 16 13:58:27 nanopi daemon.info connmand[616]: ap0 {update} flags 69699 <UP,RUNNING,LOWER_UP>
Dec 16 13:58:27 nanopi daemon.info connmand[616]: ap0 {newlink} index 5 address 4A:D8:90:22:D3:92 mtu 1450
Dec 16 13:58:27 nanopi daemon.info connmand[616]: ap0 {newlink} index 5 operstate 6 <UP>
Dec 16 13:58:27 nanopi daemon.info connmand[616]: Ignoring interface ap0 (filtered)
Dec 16 13:58:27 nanopi daemon.info avahi-daemon[590]: Joining mDNS multicast group on interface ap0.IPv4 with address 172.24.24.1.
Dec 16 13:58:27 nanopi daemon.info avahi-daemon[590]: New relevant interface ap0.IPv4 for mDNS.
Dec 16 13:58:27 nanopi daemon.info avahi-daemon[590]: Registering new address record for 172.24.24.1 on ap0.IPv4.
Dec 16 13:58:27 nanopi user.info kernel: [   15.328816] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready
Dec 16 13:58:28 nanopi daemon.info avahi-autoipd(ll-eth0)[669]: Successfully claimed IP address 169.254.10.36
Dec 16 13:58:29 nanopi daemon.info avahi-daemon[590]: Joining mDNS multicast group on interface ap0.IPv6 with address fe80::48d8:90ff:fe22:d392.
Dec 16 13:58:29 nanopi daemon.info avahi-daemon[590]: New relevant interface ap0.IPv6 for mDNS.
Dec 16 13:58:29 nanopi daemon.info avahi-daemon[590]: Registering new address record for fe80::48d8:90ff:fe22:d392 on ap0.*.
Dec 16 13:58:36 nanopi user.info kernel: [   24.418888] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
Dec 16 13:58:37 nanopi authpriv.notice login[1664]: ROOT LOGIN  on '/dev/ttyS0'
Dec 16 13:58:55 nanopi daemon.info connmand[616]: ntp: time slew +0.530016 s
Dec 16 14:00:35 nanopi daemon.err connmand[616]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 16 14:02:46 nanopi daemon.warn connmand[616]: Online check failed for 0xc73380 Wired