I have been struggling all day to get this controller to charge. I am using 4x 320w panels in series 40voc. The app shows voltage but will not charge the lifepo4 batteries and all the voltages are within activation. https://diysolarforum.com/threads/victron-smartsolar-250-100-shows-volts-but-will-not-charge.27470/page-3 this is where I’ve been getting help all day with no luck trying different things. It says charger off reason is because: disabled by remote or bms. I have the jumper that came with it to h and l but is there something else I’m missing ?? Any help is greatly appreciated.
