Installed are Victron LiFePo 12.8v Smart batteries with VEBus BMS, Quattro, Smart Solar MPPT and CCGX in a motorhome which has DC loads (12v lights, refrigerator etc) . Everything is working apart from the DC load readout on the CCGX, which I suspect will result in an inaccurate SOC. When I select "DC Load - ON" on the CCGX config settings, the DC load box appears on the Home Screen, however the dc load box only ever displays "--" even when there is a DC load turned on connected directly to the battery. As far as I can see from the setup manuals, the Smart batteries should show as a selectable option in the Battery Monitor list, however only the Quattro on VEBus appears as a battery monitor option. The battery monitor function has been turned on in the Quattro VEConfig. Anyone able to suggest what I may be missing?