Hello, I have built a three phase 60Kw system with approximately 300 panels, four wind turbines. The system is based on 6 Victron quattros. This is a three phase system with two quattros in parallel per phase. 300KwH of batteries.
The system works well, but I would like to work with a real electrical engineer (aka not me) to document the schematic, move the DC system to a busbar system, implement a couple of automations, make sure all the system safety and managment are in place and ultimately make the system such that it can be built out in a container and shipped to specific sites.
Do you have any recommendations of individuals or companies who could help me ?