question

muelli avatar image
muelli asked

ve.direct pins: power and logic levels

Hello,


a) does the ve.direct TX pin provide enough power to drive an optocoupler LED (5mA should suffice)?

b) as VCC is 5V, will the RX pin start to recognize a HIGH level from 2.0V upwards?


Thanks for helping out :)



VE.Direct
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

VE.Direct protocol FAQ