question

jorisvn avatar image
jorisvn asked

Is there a time/clock function to use in programming ACOut2 virtual assistant?

Dear all,


In case there is grid power available I would like to turn of my ACOut2 at 22hrs and turn it back on at 5.30hrs. So the geysers and fridges are not working through the night. Is there a way how I can manage this in a virtual assistant?

I have the following assistant rules in place in case there is no grid available to turn of ACOut2 to avoid my batteries run flat before the sun comes up. (and alarm goes off etc) With these settings the ACOut2 will go off between 19-20hrs. (and come back when the sun is blazing around 8.30hrs) That is fine in case there is an issue with the grid, but not for structural use. Any tips?

Or is there another workaround to create an assistant with "AND" logic iso "OR" for the rules?

Thanks.

l1-assistants-summary.jpg



Venus GX - VGXAssistantsac out 2
l1-assistants-summary.jpg (103.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

No, there is no RTC inside the Multi.
Maybe you could use an external timer (or the relay of your GX device) connected to the AUX input and use that signal.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

VEConfigure Assistants manual

Additional resources still need to be added for this topic

Venus GX manual

Venus GX product page