question

battery-boy avatar image
battery-boy asked

How to select the correct Battery System in ESS Assistant for BYD BMU LVL 15.4

I'm in the process of setting up a 3-phase system utilising 3 x Quattro 15kVA, Cerbo GX with touch 50 GX interface. The batteries used are 4 x BYD LVL 15.4 modules. The BMU connects to the BMS Can interface connection, using the Type A Cat5 cable, with a termination plug.

I'm at the point of setting up the ESS Assistant within VE Configure 3 where asked to specify the Battery System.victron-qs-002.jpg

The two options as I see it are the with two-signal or "with other type BMS".

Where in Victron literature can an answer be found, as the technical data on the LVL is scant.


ESSBMSBYD
victron-qs-002.jpg (38.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

battery-boy avatar image
battery-boy answered ·

@JohnC that's exactly what I was looking for. Thanks for taking the time to point me in the right direction. Power of community is great!

Cheers

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.