Hi,
In cloudy weather i see that the charger get's out of the Absorption before the battery is charged fully. I see the battery at 85% then the absorption ends and later during the day i might get sun but the charger won't get into Absorption until it get's back in Bulk is after 0,8V lower than Float so therefore the system would send the overflow of energy to the Grid which is wasted since i could charge my battery instead. I know i can enter Absorption using dbus and i tried it few times and it worked but i am not around to do that every time. Is there a way to configure the system to reenable absorption when the SOC is still not 100% and there is more energy that is not beeing used ?
I have a Multiplus II and a SmartSolar together with a Cerbo GX.
/Peter
