I have 4380W of panels; a Victron 150/100 MPPT; 2 banks of 11 Nissan cells each 80Ah = 160Ah. I replaced an EpEver 60 that went bad which I had set at 58v for the charge voltages - absorbtion, float and equalization (as I recall). New Victron mppt sets me at absorb 56.8v, float 54v, and disabled equaliz for lifepo4 bats(only choice for preprogrammed). My BMS's (one on each of the 2 banks), JBD-SP15s020, I've set to a presetting called "light polymer" which is 58.7999 for pack overvoltage. Can I/should I edit MPPT preset to higher and closer to BMS settings?