This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
In the Raspi CCGX Ver 2.30-8 menu only displays this setting Grid meter installed (on or off).
And in the manual is says, Control without grid meter, which is different and what revison is the change done under, which is the latest ? They are different in meaning how the system would operate with PV inverters.
Hi Rob, thanks for noticing.
v2.30~8 is a beta version; it’s not supposed to be aligned with the manuals.
Manuals are supposed to be aligned with the latest official version, v2.20.
However, I think the change you mention was done earlier already; I’ll have it checked and the manuals updated if necessary.
It’s still the same setting; only it’s title has changed; and meaning has been inverted.
So what is says if a energy meter is installed turn on the grid meter? When i do that my display shows Critical loads and AC loads but no power is shown in the AC loads only the Critical loads is shown?
Which it should do as there is a internal current sensor which all current flows though so should show on the AC loads and Critical loads?
Just done a retest with the grid meter tuned on and off, Turned on it gets stuck in passthough mode and won't use the battery storage, with it is turned off, the battery storage works as it should normal ESS operation.
And only shows the AC loads Icon with all total power for AC and Critical loads, is this a normal operation for ESS.
