I have a Victron Phoenix Inverter (800/12) setup in my Sprinter van under the passenger seat. This inverter was originally setup to supply power to a 700watt hot water heater or to a Victron MultiPlus (12/2000/80). The switch to direct the power had not been working so I replaced it recently (hadn't needed it because my solar panels supplied all the power I needed). With that said, I went ahead and replaced the power switch that controls where the power is sent. Once this was done, when I switch to send the power to the MultiPlus, it overloads the Phoenix inverter.
Now for the question. Is it possible to limit the Phoenix inverter to a maximum number of watts so that it does not hit the overload (700watts maybe) or can I limit the MultiPlus to only draw ~700watts (from the grid/phoenix inverter) for charging?
Thanks in advance.