question

grotebeau avatar image
grotebeau asked

Grid fuse blows 6A

Hi, my older Atlas combi 24V 1800w.manages to regularly pop the grids 6A220Vac fuse... When charging in boost mode... Is there a way to cap the "boost mode" for the charger?

MultiPlus Quattro Inverter Chargerfuses
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

This is a very old unit and its also not a full sinewave inverter/charger ( ie square wave)

No there is no way to cap the incoming current on these units as far as I know

I have attached the manual for the unit, as this maybe of help for you

I am also at a loss as to know where this fuse you speak of is as I cant see it in the manual and the manual indicates that the incoming fuse should be at least 25 amps Ac10001e.PDF


ac10001e.pdf (968.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.