question

jevil avatar image
jevil asked

Using SmartSolar 75/15 with float voltage only

Hi.

Is it possible to set bulk voltage = float voltage @ 13.6V ? I use my caravan's AGM-battery more as a usv or for peak loads than as a cycle battery. So for extending livetime of the battery I want to prevent the charger to use that battery cooking high bulk voltage.

What will the charger do if I set both voltage equal?

Best Regrads,

Jens

MPPT ControllersAGM Battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

just set the absorption voltage to the same as the float voltage

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic