question

anton555 avatar image
anton555 asked

Victron stopping voltage

I have my pv+ going through a fuse and my negative. When my wire isnt connected to my charge controller there is 62v aw the wire. As soon as I connect it to the charge controller and I measure the voltage at the wire its 1.3 volts. What's up with that? Every connection is fine until I connect it to the victron. Is the victron bad?

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Kevin Windrem avatar image
Kevin Windrem answered ·

Might you have the PV positive and negative reversed at the input to the charge controller?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic