This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi! I've just moved my off grid 7 year old system and after re-connecting all the equipment the battery monitor shows constantly 18.9 or 19A. The value doesn't change neither during charge or discharge. The system functions normally and the voltage goes up and down. Any ideas?
There is a problem with the cable that goes from the shunt to the BMV. Either the cable is broken along the way or one of the contacts in RJ12 connectors is not making good contact. Check that the connectors are clean.
