Hello,
I have tested my setup at home for a while and never saw this issue. Now the setup is installed in my boat, I’m getting the following.
The Cerbo will immediately shut down ( as if the power removed ) when the isolator supplying DC power to my MultiPlus 3k is switched to ‘ON’. This issue will only happen when the Multi has been without DC power for a few hours.
I have noticed there’s a substantial inrush current, where the Multi’s capacitors charge, could this have some connection to the issue?
The system setup is identical to when installed at home for testing; however the VEbus RJ45 cable between the Cerbo and the Multi is now 4x longer.
Any suggestions would be greatly appreciated.
Dan