This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am looking for a wiring schematic with wire sizes for the following equipment. Where can I find this.
6-HQST 100W solar panels, 2 sets of 3 in series
1- Victron Multiplus 3000 12v
2-Victron Smart Solar Charger Controls MPPT 100/30
2-Victron Orion-Tr Smart Charger Isolator 12/12/30
1-Victron Color Control GX
!-Victron BMV 712 Smart
1-Lynx Distributor
6-Battle Born 100A batteries in parallel
1-shore Power plug
1-130 amp alternator
Here's a good place to start:
https://www.victronenergy.com/support-and-downloads/systems
This one might come close to your system:
https://www.victronenergy.com/upload/documents/MultiPlus-3KW-120VAC-12VDC-400Ah-Li-VEBus-BMS-generator-MPPT-BMV-CCGX-Orion-Tr-Smarts.pdf
Beyond that, I recommend you find a dealer or someone familiar with Victron components and high energy systems to help with the design.
Part of that will depend on your install and how long your cable runs are. I really like this as a quick reference: http://assets.bluesea.com/files/resources/reference/20010.pdf
If you're unsure, might be worth hiring an electrician / installer to go over your design and double check wire size / fuses before you start buying stuff.
