This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I'm not able to find the right 3D drawing for MultiPlus 12/3000/120 on the Dimensions download page.
I see "Phoenix_Multiplus_12-3000_120-50_120-240V" but that seems very incomplete. It just has the front lights, switch and 4 pads. It is also less than 1MB.
Thanks,
Ali
How about these ones:
https://www.victronenergy.com/upload/documents/MultiPlus-Quattro-Inverter-3000VA.PDF
https://www.victronenergy.com/upload/documents/MultiPlus-Quattro-Inverter-3000VA-(3D).PDF
https://www.victronenergy.com/upload/documents/MultiPlus-Quattro-Inverter-3000VA-(stp).STEP
Not sure why two of the links are not resolving here, but all of these are in the downloads section for MultiPlus here:
https://www.victronenergy.com/inverters-chargers/multiplus-12v-24v-48v-800va-3kva#enclosure-dimensions
You could work out the document names from what I have pasted above.
I hope that helps a bit.
