question

daniel-chaffee avatar image
daniel-chaffee asked

BMV 712 State of charge configuration option disabled.

My battery bank cut off recently due to low voltage. As such I need to reconfigure the state of charge manually. Previously I could do this with State-of-charge configuration option to just set a percent. Now when i go to that option it is just two dashes and is not selectable. What is going on?


BMV 712 firmware v4.05

BMV Bluetooth interface firmware v2.23

Bootloader v1.10

BMV Battery MonitorSOC
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

Tap the "SYNCHRONIZE" button to make the SOC read 100%, then you can manually set the SOC to whatever value you think it is.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

daniel-chaffee avatar image daniel-chaffee commented ·
Perfect. Thanks
0 Likes 0 ·

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic