question

roelant-stegmann avatar image
roelant-stegmann asked

Multiplus lithium 24/1600

I don't have a VE config at the moment. Which settings can I best use for my 2x100Ah 24V LiFiPo4 bank? How important is it to buy a VE connector?

1623309839159.png

MultiPlus Quattro Inverter Charger
1623309829125.png (90.6 KiB)
1623309839159.png (90.6 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Gonenc Ozkul avatar image
Gonenc Ozkul answered ·

Hello.


I would strongly recommend to do the configuration with VE.Configure. The MK3 is very cheap compared to the batteries you purchased. When you add the VE.Bus BMS assistant to Multi, you will see the below settings.

1623314411418.png

As it is seen, there is not a matching characteristics with dip switches. Also, absorption time should be 1 hour.

I hope it helps.


1623314411418.png (68.7 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.