question

murphy-r avatar image
murphy-r asked

Multiplus SOC Data Values

Hello,

I am pulling data off our Multiplus through the Venus GX. I look at the below data field. What I see is that the value for this field is either 0 or 1. For my BVM devices it will provide in the same stateofCharge field a value between 0 and 1 representing a % of charge. Anyone have insight the multiplus values are not reflecting of battery charge level. In the below "261" is the Victron ID of my Multiplus.

electrical.chargers.261.capacity.stateOfCharge

Multiplus-IIgx device
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources