question

alexgill180 avatar image
alexgill180 asked

Blue Smart IP22 repeated 30amp then 0amps?

My IP22 Blue Smart charger is not working properly. It charges in bulk mode at 30amps for around 30secs, then the amps drop to 0 and it switches to absorption for around 30secs. This cycle keeps repeating.

I have tried using a replacement charger and the same thing happened. It has been working fine for around a month but has only recently started doing this.

Any ideas? Thanks

MultiPlus Quattro Inverter Chargerchargerip22
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Murray van Graan avatar image Murray van Graan commented ·

Can you share some more info, what battery are you using, cable size between charger and battery and also the length of this cable. It sounds like a large voltage drop between charger and battery could be the cause

0 Likes 0 ·
0 Answers

Related Resources

MultiPlus Product page / Quattro Product page 

MultiPlus 230V Manual / Quattro 230V Manual

MultiPlus 230V Datasheet / Quattro 230V Datasheet 

VE.Bus Error codes / VE.Bus configuration guide

Chargers.

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic