I'm planning to install these Victron pieces and would like to know if ONE (Cerbo GX & GX Touch 50) can be used to monitor & control them all.
1) 48V system:
* Lynx Distributor with fuses & Lynx Shunt ==>VE.Can
* MultiplusII Inverter/Charger (120V) ==> VE.Bus
* Phoenix Inverter Smart (230V) ==> VE.Direct
* 2 MPPT Controllers ==> VE.Direct for each (2)
2) 12V system:
* Lynx Distributor with fuses & Lynx Shunt ==>VE.Can
* 2 MPPT controllers ==> VE.Direct-To-USB for each (2)