This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good morning,
my two Pylontech US2000C do only charge and discharge with 12,5 A. Also both batteries show CCL and DCL 25.0A. What goes wrong and how can I fix this. The cabeling is OK and checked.
The other eqiupment:
MultiPlus-II 48/3000/35-32 (V 481) , Cerbo GX (V 2.66), EM24
On the cerbo under battery and parameters what does it say there?With 2 you should have at least 50A
If weak ac is checked on the inverter programming, this can also happen since you havent mentioned solar i assume you are grid charging.
Hi,
thank you for answering.
In the meantime I've installed a third Pylontech US2000C.
But I see under Parameter only 25A, for my understanding this should be now 75 A.
Now to you questions:
Yes, the system is configured exactly to your offered page.
The weak AC is not checked.
Any ideas ?
The other eqiupment:
MultiPlus-II 48/3000/35-32 (V 482) , Cerbo GX (V 2.66), EM24
Hello Mac, Maybe you can try to change other battery as the master.. See what happens then.
regards, Rob
