question

solarone avatar image
solarone asked

Multiplus How to display critical loads and grid code selection

Hi

How can I display the critical loads and ac loads like in the pic below (pic from another user question)

I have Multi 24:3000 don’t have ess installed yet

I can not select grid code AUS/NZ grid code and have lom device,how can I select au/nz grid code or do I have to select other not complaint

Thanks

MultiPlus Quattro Inverter ChargerESSAssistants
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

This is in the ess selections and select grid meter.

but you should have the grid meter


Also I presume you have a AC current sensor installed and the associated assistant.


as to your grid code selection issue I dont know as I use other as my site is in Thailand, and I dont have a selection

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

denzel avatar image
denzel answered ·

I have been trying to get this done for months now with no joy.... I actually started to sell my Victron kit as the ESS is not a friendly or smart as it claims to be.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.