Hello,
I am building a 24v Victron system to go in an expedition vehicle.
Currently I have (For testing) 2 x 95ah 12v batteries lead acid type
CCGX
BMV712
Multiplus (Older chip updated to firmware with Assistants)
My question is - The voltage drop overnight with a 100ma load (BMV and CCGX) above is not reflected in the SOC. The capacity in the BMV is set to 85ah and all settings are correct for the battery type, all connections are checked. Shunt is correctly wired.
Why is the SOC not dropping in line with the voltage?
Many thanks